产品介绍
美国AII 长寿命电化学氧气传感器 O2传感器 XLT-11-75-KE25F3应用：
0-100%的量程，应用与麻醉机 ，氧气分析仪，呼吸机等
美国AII 长寿命电化学氧气传感器 O2传感器 XLT-11-75-KE25F3：
更换传感器用于:KE-25F3
美国AII 长寿命电化学氧气传感器 O2传感器 XLT-11-75-KE25F3 参数：
| 测量范围 |
0-100% O2 |
| 精度 |
+ 5% |
| 信号输出 |
10 - 15.5 mV |
| 全量程 |
+ 1% |
| 响应时间T90 |
13s |
| 漂移% |
< 1% |
| 线性度 |
+ 1% |
| 温度系数 |
补偿 |
| 工作温度 |
0 to 40°C |
| 存储温度 |
5 to 25°C |
| 推荐储存 |
6个月 |
| 操作压力 |
Constant 5-30 PSIG |
| 湿度不凝结（预期寿命） |
10-99%RH |
| 预期寿命 |
36个月 |
| 流量 |
1-10 LPM |
| 质保期 |
12个月 |
| 电气连接器 |
3.250" Wires |
| 包装 |
Polyetylene bag in 3" x 3" x 1.5" paper box |
(1) In air @ 25° C and 1 atm. Expected life varies inversely with changes in O2 concentration, temperature, pressure.
(2) Under constant conditions. Calibrate as near sample conditions as possible. Calibrate with 95-100% oxygen for measurements > 40% oxygen.
(3) Once the signal output stabilizes following a step change in temperature.
(4) Recommended 5-35° C. Sensors may be stored at -10 to 55° C on an intermittent basis only.
(5) Ex-factory unless agreed to in writing. Under normal application conditions sensor is warranted to be free of defects in material and workmanship for the period specified above proved the sensor is properly installed and operated. Analytical Industries Inc. shall not be liable for buyer's negligence,
misapplication, alteration or abuse. The sole remedy for a sensor determined to be defective by Analytical Industries Inc. is limited to replacing the defective sensor.
