Capteur de température infrarouge Smartec Pays-Bas - SMTIR9902SIL

1. Smartec NetherlandsCapteur de mesure de température infrarougeDescription SMTIR9902SIL :

The SMTIR99XX series is based on thermopile siliconInfrared sensorInfrared sensors can be used for non-contact temperature measurement. Since infrared radiation characteristics are related to temperature, filters can be used to measure different temperature ranges. Mature semiconductor processes can reduce costs while miniaturizing the device. To meet certain applications, the opening angle of the infrared sensor can be designed to be less than 7°.

Based on the Seebeck effect, the temperature difference can be calculated from the analog output obtained by the infrared sensor. The SMT9902 has a built-in temperature sensor that can measure the temperature of its own cold junction, thereby calculating the temperature of the measured object. The sensor itself operates at -40 to 100°C. It uses a TO05 package.

2. Smartec NetherlandsCapteur de mesure de température infrarougeCaractéristiques SMTIR9902SIL :
Haute précision
High sensitivity (110V/W)
High signal-to-noise ratio (Rs~50kohm)
Response time (40ms)
Low-cost thin-film process
High-pass infrared filter (>5.5μm)
Standard TO05 package

3. Smartec NetherlandsCapteur de mesure de température infrarougeApplications SMTIR9902SIL :

Infrared radiation detection

4. Smartec NetherlandsCapteur de mesure de température infrarougeParamètres SMTIR9902SIL :

特点	参数	Unité
Number of thermocouples	100
范围	0.50	mm²
Résistance	50±15	KΩ
Temps de réponse	50±10	ms (63%)
Plage de température	-20–100	°C
储存温度	-40–100	°C
Résistance	1.000±0.004	KΩ( @ 0°C)