产品介绍
一、英国Detectronic 水质传感器 MMs-d010描述:
ORAKEL系列的余氯分析仪、余氯控制器、余氯监测仪是一种对pH变化不敏感、不使用试剂、极其稳定、降低了维护和全寿命成本的膜设备。
薄膜安培氯传感器增强了第三个,参考电极,消除零漂移。其独特的设计意味着pH值校正通常根本不需要,完全消除试剂。
除了先进的电位静态时间安培自由氯和总氯传感器,ORAKEL系列剩余氯分析器具有您需要的所有功能,以及更多。
二、英国Detectronic 水质传感器 MMs-d010的应用
ORAKEL 氯传感器范围特别适合在可靠性和易用性最重要的场所工作。
ORAKEL 氯传感器的选择
自由氯
总氯
游离氯“零”
水处理应用程序
氯加药
造纸厂
冷却塔
远程站点
准备食物
二氯化
ORAKEL 氯传感器可安装在各种辅助流量单元和自清洗装置中。
三、英国Detectronic 水质传感器 MMs-d010参数:
| Type |
Membrane covered potentiostatic chronoamperometric three-electrode system |
| Measurement |
Total chlorine or free chlorine |
| Range |
0.01-2mg/l, 0.01-5mg/l, 0.01-10mg/l, 0.01-20mg/l and 0.5-200mg/l (free only). |
| Resolution |
0.01mg/l (ppm) (0.1 on 0-200mg/l ranges). |
| Reproducibility |
Better than ±0.05mg/l. |
| Stability |
-1% per month (without calibration). Working electrode: gold. Counter electrode: stainless steel. Reference electrode: silver/silver halide |
| Membrane Material |
Membrane Material. |
| Flow Rate |
Approximately 0.5l/minute (minimum 0.25l/minute). |
| Temperature Range |
0 to <45°C. |
| Temperature Compensation |
Automatically by an integrated thermistor. |
| pH Range |
pH 4 up to pH 9. |
| First Polarisation Time |
2 hours. |
| Re-Polarisation Time |
30 minutes. |
| Response Time |
T90: approximately 120 seconds. |
| Zero-Point Adjustment |
Not necessary. |
| Calibration |
Manual using electrochemical test kit or DPD test kit. |
| Housing Material |
PVC, silicone and polycarbonate stainless steel. |
| Dimensions |
Diameter: approximately 25mm. Length: 175mm. |
| Maintenance Intervals |
Membrane: once a year (depending on water quality). Electrolyte: once a year (depending on water quality). |
| Interferences |
High levels of other oxidants such as Ozone and Chlorine Dioxide |
推荐产品