SKA/JGW-SFY Near-Infrared Moisture Detection Module Cement Raw Material Moisture Detection - SKA/JGW-SFY
Measurement principle: near-infrared diffuse reflectance spectroscopy (O-H bond characteristic absorption, 1450nm/1940nm)
• Measurement range: 0-60% moisture content (customizable 0-70%), suitable for granular, powder, and sheet materials; not suitable for water seepage, slurry, or highly reflective metals
• Measurement accuracy: ±0.2% (low moisture range 0-15%); ±0.5% (high moisture range >15%), accuracy depends on material modeling calibration
• Resolution: 0.01%
• Repeatability: ≤±0.1%
• Response time: 0.2-30s (filtering can be set)
• Spot diameter: 50-80mm (varies with installation distance)
• Measurement distance: 200-400mm (from probe to material surface)
Product Introduction
SKA/JGW-SFY Near-Infrared Moisture Detection Module - Product Overview
The SKA/JGW-SFY Near-Infrared Moisture Detection Module is an online analysis module used for moisture detection in cement raw materials. Search keywords: near-infrared moisture detection module, cement raw material moisture detection, online near-infrared moisture analyzer. This module can non-contact measure the moisture content in cement raw materials such as limestone, clay, iron powder, and coal gangue, and is suitable for cement plants and mines. In cement raw material moisture detection, the SKA/JGW-SFY Near-Infrared Moisture Detection Module can monitor moisture changes in real time, helping enterprises control raw meal quality and reduce energy consumption.
SKA/JGW-SFY Near-Infrared Moisture Detection Module - Working Principle
The SKA/JGW-SFY Near-Infrared Moisture Detection Module is based on the principle of near-infrared spectral absorption and calculates the moisture content of cement raw materials by measuring the absorption intensity of water molecules in specific wavelength bands. In cement raw material moisture detection, the SKA/JGW-SFY Near-Infrared Moisture Detection Module adopts a diffuse reflection mode and is suitable for granular and powdery materials. This module has a fast response speed and can perform continuous online monitoring. Cement raw material moisture detection places high demands on the accuracy and dust resistance of the SKA/JGW-SFY Near-Infrared Moisture Detection Module, and it must adapt to the harsh environment of cement plants.
SKA/JGW-SFY Near-Infrared Moisture Detection Module - Application Scenarios
The SKA/JGW-SFY Near-Infrared Moisture Detection Module is widely used in the raw material crushing, pre-homogenization, raw mill, and rotary kiln stages of cement plants. Cement raw material moisture detection can help enterprises control batching and grinding processes and improve raw meal stability. The SKA/JGW-SFY Near-Infrared Moisture Detection Module can be installed on conveyor belts, chutes, and mill inlets. In cement raw material moisture detection, the SKA/JGW-SFY Near-Infrared Moisture Detection Module can be linked with DCS and PLC systems to achieve automatic control.
SKA/JGW-SFY Near-Infrared Moisture Detection Module - Technical Advantages
The SKA/JGW-SFY Near-Infrared Moisture Detection Module has advantages such as non-contact, fast, and continuous measurement. In cement raw material moisture detection, the SKA/JGW-SFY Near-Infrared Moisture Detection Module can reduce manual sampling and improve detection efficiency. This module adopts an industrial-grade design with a high protection rating and is suitable for the dusty environment of cement workshops. Cement raw material moisture detection helps enterprises improve product quality and reduce energy consumption. When selecting the SKA/JGW-SFY Near-Infrared Moisture Detection Module, attention should be paid to the measurement range, accuracy, response time, and dustproof performance to ensure long-term stable operation of cement raw material moisture detection.
