MS3988/MS3988N is a four-channel DMOS full-bridge driver that can drive two stepper motors or four DC motors. Each full-bridge can operate up to 1.2A at 36V supply.
MS3989/MS3989N is a four-channel DMOS full-bridge driver that can drive two stepper motors or four DC motors. Each full-bridge can operate up to 1.2A at 36V supply.
MS3999 is a four-channel programmable current DMOS full-bridge driver that can drive two stepper motors or four DC motors. Each full-bridge can operate up to 1.2A at 36V supply.
MS35775 is a high-precision, low-noise two-phase stepper motor driver IC. It integrates fast mode and quiet mode to meet different applications at high and low speeds. The chip has built-in power MOSFETs, with an average current of 1.4A and peak current of 2A for long-term operation.
MS41908M is a lens driver IC for network cameras and surveillance cameras. It features built-in aperture control; through voltage driving and torque ripple correction technology, it achieves ultra-low noise micro-stepping.
MS41969 is a dual-channel 12V stepper motor driver IC. It achieves ultra-low noise micro-stepping through voltage driving with current subdivision and torque ripple correction technology. The chip also includes a DC motor driver.
MS41959 is a four-channel stepper motor driver IC, with two channels driven by 12V voltage and two channels driven by 5V, capable of driving four channels of stepper motors simultaneously.
MS41949 is a four-channel low-voltage 5V stepper motor driver IC that can drive four stepper motors. It achieves ultra-low noise micro-stepping through voltage driving with current subdivision and torque ripple correction technology.
MS41939 is a single-channel 5V low-voltage stepper motor driver IC. It achieves ultra-low noise micro-stepping through voltage driving with current subdivision and torque ripple correction technology.
MS41929 is a dual-channel 5V low-voltage stepper motor driver IC. It achieves ultra-low noise micro-stepping through voltage driving with current subdivision and torque ripple correction technology.
MS41928M is a lens driver IC for network cameras and surveillance cameras. It features built-in aperture control; through voltage driving and torque ripple correction technology, it achieves ultra-low noise micro-stepping.
MS41919 is a dual-channel 5V low-voltage stepper motor driver IC. It achieves ultra-low noise micro-stepping through voltage driving with current subdivision and torque ripple correction technology.
MS41918M is a lens driver IC for network cameras and surveillance cameras. It features built-in aperture control; through voltage driving and torque ripple correction technology, it achieves ultra-low noise micro-stepping.
MS41909 is a lens driver IC for network cameras and surveillance cameras. It achieves ultra-low noise micro-stepping through voltage driving and torque ripple correction technology.
MS35009 is a lens drive system IC. Due to its micro-stepping characteristics, it can meet complex, precise, and low-noise lens drive systems. The micro-stepping drive control module is integrated into the chip, which can greatly reduce CPU power consumption.
MS32006 is a multi-channel motor driver IC, including two stepper motor drivers and one DC motor driver; each channel has a high current of 1.0A; supports two-phase four-wire and four-phase five-wire stepper motors.
MS4998 is a bipolar micro-stepping motor driver IC with built-in 8-bit DAC, supporting full-step, 1/2, 1/4, 1/8, 1/16, 1/64, 1/128, 1/256 eight stepping modes; the chip has a large 35V, ±1.5A drive capability.
MS4989 is a bipolar micro-stepping motor driver IC with built-in 4-bit DAC, supporting full-step, 1/2, 1/16, 1/64 four stepping modes; the chip has a large 35V, ±1.5A drive capability.
MS4988 is a bipolar micro-stepping motor driver IC with built-in 4-bit DAC, supporting full-step, 1/2, 1/4, 1/8, 1/16 five stepping modes; the chip has a large 35V, ±1.5A drive capability.
MS4985 is a bipolar micro-stepping motor driver IC with built-in 4-bit DAC, supporting full-step, 1/2, 1/4, 1/8 four stepping modes; the chip has a large 35V, ±1.5A drive capability.
MS4982 is a bipolar micro-stepping motor driver IC with built-in 4-bit DAC, supporting full-step, 1/2, 1/4, 1/16 four stepping modes; the chip has a large 35V, ±1.5A drive capability.
MS4932N is a three-phase sinusoidal brushless DC motor (BLDC) or permanent magnet synchronous motor (PMSM) controller. The chip processes Hall sensor signals, and the controller can achieve PWM switching by switching the three-phase converter.
MS4933 is a three-phase sinusoidal brushless DC motor (BLDC) or permanent magnet synchronous motor (PMSM) controller. The chip processes Hall sensor signals, and the controller can achieve PWM switching by switching the three-phase converter.
MS39545 is a sensorless three-phase DC motor driver IC, using sinusoidal drive method, featuring low noise and low vibration.
MS39549 is a sensorless three-phase DC motor driver IC, using sinusoidal drive method, featuring low noise and low vibration.
MS8829 is a three-phase brushless motor driver IC with a maximum operating voltage of 35V and a maximum drive current of 1.5A.
MS8828 is a three-phase brushless motor driver IC with a maximum operating voltage of 35V and a maximum drive current of 1.5A.
MS8313 provides three independently controllable half-H bridge drivers. It can be used to drive solenoids or other loads, mainly for driving a three-phase brushless DC motor.
MS4931 is a three-phase brushless motor pre-driver IC with a maximum operating voltage of 35V, suitable for driving a wide range of N-channel power MOSFETs. The chip features stall protection, over-temperature protection, and synchronous rectification.
MS3791 is a three-phase brushless motor pre-driver IC with a maximum operating voltage of 35V, suitable for driving a wide range of N-channel power MOSFETs. The chip features stall protection, over-temperature protection, and synchronous rectification.
MS3111D is a low-voltage 5V DC motor driver IC, providing an integrated motor drive solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications.
MS3010 is a low-voltage 5V DC motor driver IC, providing an integrated motor drive solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications.
MS3111S is a low-voltage 5V DC motor driver IC, providing an integrated motor drive solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications.
MS3112 is a dual-channel 5V full-bridge driver IC that can be used as a stepper motor driver. It provides an integrated motor drive solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications.
MS3122 is a dual-channel full-bridge driver IC, providing an integrated motor drive solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications.
MS3142/MS3142S is a dual full-bridge motor driver. The power supply voltage range is 4V to 18V, with an average current of 1.1A and peak current of 1.54A. For higher current capability, the dual full-bridges can be used in parallel.
MS3145D is a dual full-bridge motor driver. The power supply voltage range is 4V to 18V, with an average current of 1.1A and peak current of 1.54A. For higher current capability, the dual full-bridges can be used in parallel.
MS8837 is a DC motor driver IC, providing an integrated motor drive solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications.
MS8838 is a DC motor driver IC, providing an integrated motor drive solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications.
MS31001 is a low-voltage 5V DC motor driver IC, providing an integrated motor drive solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications.
MS31011 is a low-voltage 5V DC motor driver IC, providing an integrated motor drive solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications.
MS31051S/D is a low-voltage 5V DC motor driver IC, providing an integrated motor drive solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications.
MS8847 is a dual H-bridge driver circuit. It provides solutions for home appliances and other mechatronic applications. The device can be used to drive a stepper motor or other loads. Each output driver channel contains N-channel power MOSFETs configured in an H-bridge.
MS8844 provides four independently controllable half-H bridge drivers. It can be used to drive DC motors, a stepper motor, four solenoids, or other loads. Each output driver channel contains N-channel power MOSFETs configured in a half-H bridge.
MS3114 is a four-channel low-voltage 5V full-bridge driver IC, providing an integrated motor drive solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications.
