Ultrasonic Sensor | Sensors

USA Migatron Corporation Analog Ultrasonic Sensor - RPS-150A

The RPS-150A analog ultrasonic sensor is installed in a limit switch housing and is completely self-contained. Its supply voltage is 20-30VDC and is reverse protected. It also has a wide beam angle, allowing it to detect objects that are not at right angles. A flat object can be tilted up to 35 degrees and still be detected. The RPS-150A has two short-circuit protected analog outputs, 4-20mA and 0-10VDC.

USA Migatron Corporation Self-Contained Ultrasonic Proximity Sensor - RPS-400-30

The RPS-400-30 is a self-contained ultrasonic proximity sensor with a 22mm barrel housing and a supply voltage of 12-30VDC. In harsh environments, the sealed sensor is dust and moisture resistant. The sensor is constructed of Delrin plastic and a silicone rubber sensing face. This sensor is sensitive to range or distance, allowing it to detect only objects within the desired range while rejecting objects outside the desired range.

USA Migatron Corporation Analog Ultrasonic Sensor - RPS-401A, RPS-426A

The RPS-401A and RPS-426A analog ultrasonic sensors are located in barrel housings and are completely self-contained. Their supply voltage is 20-30VDC and they are reverse polarity protected. They also have a narrow beam angle, allowing them to enter sealed positions. A flat object can be tilted up to 8 degrees and still be detected.

USA Migatron Corporation Wide Angle Beam Ultrasonic Sensor - RPS-150

The RPS-150 is a self-contained wide angle beam ultrasonic sensor. The advantage of this sensor is that the object to be detected does not have to be at right angles to the sensor to be detected. A flat object can be tilted up to 35 degrees and still be detected. An LED indicator is provided for setup purposes. When not in detection state, the LED is green; when in detection state, the LED is red.

USA Migatron Corporation High Precision Analog Ultrasonic Sensor - RPS-412A

The RPS-412A is a high precision analog ultrasonic sensor (0.002" or 0.05% of range, whichever is greater, at 25"). The high precision ultrasonic sensor RPS-412A has built-in temperature compensation, monitoring and compensating for air temperature 50 times per second. The RPS-412A high precision ultrasonic sensor also compensates for changes in relative humidity, changes in barometric pressure, and other factors affecting the speed of sound.

USA Migatron Corporation Analog Ultrasonic Sensor - RPS-409A

The RPS-409A analog ultrasonic sensor is a self-contained sensor installed in a 30mm PVC cylindrical housing. Its supply voltage is 20-30VDC with reverse polarity protection. The RPS-409A utilizes today's PLC and computer analog input cards. The selected analog card determines the system resolution, and the values programmed into the PLC or computer determine the zero point and span.

Italy Nesa Ultrasonic Level Sensor - LU06

The Italy Nesa ultrasonic level sensor LU06 is a sensor made of a piezoelectric transducer with IP67 rating, used to protect the sensor from direct solar radiation and wind ducts.

MaxBotix Robot Ultrasonic Sensor - MB7360

The robot ultrasonic sensor MB7360 is a high-resolution (1mm), high-precision, low-power ultrasonic sensor. In design, it not only processes interference noise and has anti-noise interference capability, but also compensates for sensitivity for targets of different sizes and varying supply voltages. Additionally, it has standard internal temperature compensation and optional external temperature compensation, making the measured distance data more accurate. It directly outputs precise distance readings, saving MCU resources.

MaxBotix High Performance Sonar Rangefinder Ultrasonic Sensor - MB7040

The MaxBotix high performance sonar rangefinder ultrasonic sensor MB7040 industrial outdoor I2CXL-MaxSonar-WR sensor has a rugged PVC housing to meet IP67 water ingress protection. These sensors provide short to long distance detection and narrow beam angles. The I2CXL-MaxSonar-WR outdoor ultrasonic sensor features high power output, noise suppression, and automatic calibration.

MaxBotix Ultrasonic Sensor - MB7480

The 4-20HR-MaxSonar-WR sensor series is a high-performance ultrasonic precision rangefinder that provides high accuracy and high resolution ultrasonic ranging in air.

MaxBotix Ultrasonic Sensor - MB7780

The MB7780 sensor has a self-cleaning feature. It can gently heat the surface of the sensor, atomizing any moisture/condensation on the transducer surface of the sensor.

USA SENIX Corrosion-Resistant Level Sensor - ToughSonic CHEM 10

The chemical-resistant level sensor ToughSonic CHEM 10 is suitable for applications where corrosive liquids or gases are present, but it is also a good choice for benign environments. It is the shorter range of the ToughSonic CHEM sensor series with a range of 10 feet (3 meters).

USA Migatron Corporation Ultrasonic Sensor - RPS-400-6

The RPS-400-6 is a small, high-frequency sensor. It is included in the ultrasonic sensor series to better meet the needs of the machinery manufacturing industry. The RPS-400-6 is a three-wire NPN transistor output device. At 50mA, the transistor can continuously switch (output) 30VDC. The RPS-400-6 is ideal for detecting transparent objects. Due to its ability to operate in dusty environments, it is suitable for reinforced conveyors, PC board mounting, and more.

USA Migatron Corporation Analog Ultrasonic Sensor - RPS-401A-80P

The RPS-401A-80P analog ultrasonic sensor is installed in a PVC barrel housing and operates independently. Its supply voltage is 20-30VDC and it is reverse polarity protected. It also has a narrow beam angle, allowing it to enter sealed positions. A flat object can be tilted up to 10 degrees and still be detected.

USA SENIX ToughSonic - TSPC-21S/21SRM/25P

The ToughSonic 50 ultrasonic sensor has a detection range of 50 feet (15.2 meters). Like all ToughSonic sensors, they are durable and easy to use in harsh industrial environments. ToughSonic 50s are fully submersible, corrosion-resistant, impact-resistant, and rugged.

USA SENIX Remote Ultrasonic Level Sensor - ToughSonic REMOTE 50

The ToughSonic REMOTE 50 is a remote level sensor with a detection range of 50 feet (15.2 meters). This digital sensor is designed for precision and long-term durability in remote monitoring applications with a stainless steel housing. With a stainless steel housing, full epoxy encapsulation, and IP68 rating, it operates in harsh climatic conditions.

Czech Dinel Ultrasonic Level Transmitter Level Sensor - ULM-70

Suitable for continuous measurement of various liquids, bulk solids, and paste materials. Unaffected by volatile gases and vapors, temperature, pressure (vacuum), and dust. Can be used in explosive areas (models Xi/XiT) or flammable dust areas (models Xd, XdT). During measurement, it must be kept 300mm or 500mm away from the wall (depending on the model) to ensure measurement accuracy.

Korea Hagisonic Ultrasonic Sensor Module - HG-B40A, HG-B40C

The HG-B40A/HG-B40C ultrasonic sensor modules have low power consumption, high sensitivity, and multiple input/output modes. The automatic sensitivity control function is proportional to the upper limit of distance error.

Korea Hagisonic Ultrasonic Proximity Sensor Module - HG-P40 Series

Uses only a single transceiver sensor unit to send and receive signals.

Korea Hagisonic Ultrasonic Ranging Sensor Module - HG-C40U

Korea Hagisonic Ultrasonic Ranging Sensor Module HG-C40U

TRI - CLS Series

The ultrasonic label sensor CLS series is an ultrasonic clear label sensor with OLED graphic display for monitoring sensor performance.

Korea Ecube Labs Ultrasonic Sensor Trash Bin - Clean CAP Flex

Clean CAP's ultrasonic sensor can detect solids (general waste, paper, glass, e-waste, textiles, etc.) and liquids (oil, sludge, agricultural products, etc.). The sensing distance can reach from 30 cm to 400 cm (4 meters/13 feet).

MaxBotix Ultrasonic Obstacle Avoidance Sensor - MB1043 MB1033

The MB1043 MB1033 is a high-resolution (1mm), high-precision, low-power ultrasonic sensor. In design, it not only processes interference noise and has anti-noise interference capability, but also compensates for sensitivity for targets of different sizes and varying supply voltages. Additionally, it has standard internal temperature compensation, making the measured distance data more accurate. For indoor environments, it is a very good low-cost solution!

MaxBotix Drone Ultrasonic Sensor - MB7052

The drone ultrasonic sensor MB7052 is an ultrasonic sensor with IP67 protection rating, which can prevent dust inhalation and withstand brief immersion. It is encapsulated in PVC material and has certain corrosion resistance. In outdoor environments with clutter interference, it can effectively remove clutter and detect target distance information. The sensor has a resolution of up to 1 cm and can measure distances up to 7.65 meters. Therefore, it is a low-power product suitable for outdoor environments, such as drones.

MaxBotix Silo Level Ultrasonic Sensor - MB1210

The silo level ultrasonic sensor MB1210 is a low-cost ultrasonic sensor that can measure long distances (up to 7.65 meters). It not only has real-time calibration capability, but also has continuously variable gain for targets at different distances to obtain more accurate data. With a wide supply voltage range of 3.3V to 5.5V and low power consumption, it is also suitable for battery-powered systems. In the same series with similar performance to the MB1210, there are also models that can measure up to 10.68 meters.

MaxBotix IP67 Waterproof Ultrasonic Level Sensor - MB7589

The MB7589 sensor has a self-cleaning feature. It can gently heat the surface of the sensor, atomizing any moisture/condensation on the transducer surface. In various applications where condensation is a problem, many of these applications require self-cleaning, and the MB7589 is specifically designed for these applications. For example, in fuel tanks or water tanks, on clear or cold nights, this makes the sensor hardware colder than the surrounding environment. On the exposed sensor hardware surface, condensation can form.

MaxBotix High Performance Ultrasonic Proximity Sensor - MB1444

MB1444 features: USB interface for easy installation and connection to a computer; USB micro connector compatible with most current smartphones; simple True/False output and optional range output; approximately 2.5 seconds object distance acquisition time and approximately 1.5 seconds object distance recovery time; filtered distance output allows ranging and multi-sensor operation; zero-distance object detection.

MaxBotix Pedestrian Detection Ultrasonic Sensor - MB1010

The pedestrian detection ultrasonic sensor MB1010 is an ultra-low-power, wide beam angle, and high-sensitivity ultrasonic sensor. It can obtain reliable and stable distance data through pulse width output, analog voltage output, and serial output. It has a short measurement cycle and can measure distances up to 6.45 meters. It is also one of the company's most popular indoor ultrasonic sensors because it is an excellent low-cost general-purpose sensor.

USA Hexamite Ultrasonic Sensor - Tx-HX

Distance measurement resolution from the ultrasonic transmitter is 1mm.

USA Hexamite Ultrasonic Sensor - Rx-HX

Distance measurement resolution from the ultrasonic transmitter is 1mm.

Korea Hagisonic Robot Ultrasonic Sensor Module - HG-M40 Series, HG-L40 Series

The Korea Hagisonic robot ultrasonic sensor modules HG-M40 series and HG-L40 series can be used not only as transceiver modules, but also as receivers or transmitters with different wiring configurations.

MaxBotix Ultrasonic Sensor Human Detection Sensor - MB1004

The ultrasonic human detection sensor MB1004 is a proximity sensor specifically with high and low level alarm signal output. It can measure a range of up to 213 cm and is suitable for pedestrian detection, parking detection, etc. When a pedestrian enters the detection range, the MB1004 outputs an alarm signal that changes from low to high level. It also has the function of outputting the specific distance of the target, outputting distance data via RS232. The MB1004 is a very low-cost human detection ultrasonic sensor.

USA Migatron Corporation Intrinsically Safe Ultrasonic Sensor - RPS-409A-IS2

The RPS-409A-IS2 is an intrinsically safe analog ultrasonic sensor with various ranges available. The sensor is self-contained, installed in a 30mm cylindrical housing, powered by 16-30V DC with reverse polarity protection. The RPS-409A-IS2 utilizes today's PLC and computer analog input cards. The values programmed into the PLC or computer determine the zero point and span.

USA Migatron Corporation Analog Ultrasonic Sensor - RPS-409A-2P

The RPS-409A-2P analog ultrasonic sensor is a self-contained sensor installed in a PVC housing with 2" NPT threaded mounting. Its supply voltage is 2-30VDC with reverse polarity protection. The RPS-409A-2P utilizes today's PLC and computer analog input cards. The selected analog card determines the system resolution. The values programmed into the PLC or computer determine the zero point and span.

USA SENIX Ultrasonic Level Sensor - ToughSonic REMOTE 14

The ToughSonic REMOTE 14 is a remote water level sensor with a detection range of 14 feet (4.3 meters). This digital sensor is designed for precision and long-term durability in remote monitoring applications with an ultrasonic level sensor stainless steel housing. With a stainless steel housing, full epoxy encapsulation, and IP68 rating, it can withstand harsh environmental conditions.

MaxBotix Level Ultrasonic Sensor - MB7389 MB7380

The MB7389 hrxl-maxsonar-wr sensor line provides high-accuracy, high-resolution ultrasonic proximity detection and ranging in air. This sensor line features 1mm resolution, target size and operating voltage compensation. To improve accuracy and better reject external noise sources, internal temperature compensation of speed and optional external temperature compensation are included.

UPA Ultrasonic Sensor - T/R55.5-15.5E279Z-L19-01

UPA ultrasonic sensor, sealed sensor, also known as reversing radar "probe", is the core component of reversing radar, using ultrasonic to measure the distance between obstacles around the vehicle.

MaxBotix Trash Can Ultrasonic Sensor - MB7139

The trash can ultrasonic sensor MB7139 is a weather-resistant ultrasonic sensor used to detect trash can capacity. This sensor is the one we recommend for testing inside trash cans. It features high output sound power with continuously variable gain, real-time automatic calibration, and noise suppression algorithms, effectively achieving noise-free distance readings.

Ultrasonic Ranging Module - UM0034-002

The UM0034-002 is a non-contact ultrasonic ranging module. By measuring the time of flight of ultrasonic from transmission to reception, this module can detect objects within 1.2 meters and output distance signals via UART interface.

Korea Ecube Labs Ultrasonic Sensor Trash Bin - Clean CAP Plus

Clean CAP's ultrasonic sensor can detect solids (general waste, paper, glass, e-waste, textiles, etc.) and liquids (oil, sludge, agricultural products, etc.). The sensing distance can reach from 30 cm to 400 cm (4 meters/13 feet).

Ultrasonic Obstacle Avoidance Sensor Module - UM0090

UM0090 is a ranging module based on a transceiver integrated ultrasonic sensor.

Japan Murata Ultrasonic Sensor - MA300D1-1

Japan Murata Ultrasonic Sensor MA300D1-1

Japan Murata Ultrasonic Sensor - MA40S4R

Japan Murata Ultrasonic Sensor MA40S4R

USA SENIX ToughSonic 14 Ultrasonic Level Sensor - TSPC-30S1-232/485

The ToughSonic 14 ultrasonic sensor has a detection range of 14 feet (4.3 meters). Like all ToughSonic sensors, it is rugged and easy to use in harsh industrial environments.

Ultrasonic Level Switch - XLS-1

The XLS-1 ultrasonic level switch is a rugged product from Gems that can be used as a replacement for reed switch level sensors.

USA Migatron Corporation Intrinsically Safe Analog Ultrasonic Sensor - RPS-409A-IS

The RPS-409A-IS is an intrinsically safe analog ultrasonic sensor, powered by 16-30VDC with reverse polarity protection. The RPS-409A-IS2 has a 0-10VDC analog output with short circuit protection. The analog voltage per inch is fixed based on the maximum range of the device. The RPS-409A-IS utilizes today's PLC and computer analog input cards. The values programmed into the PLC or computer determine the zero point and span.

Spain Calypso Instruments Ultrasonic Anemometer - ULTRASONIC PORTABLE

Built-in ultrasonic sensors will provide you with maximum accuracy that we have in an anemometer. Allows continuous measurement of wind speed and direction.

MaxBotix Human Ranging Sensor Ultrasonic Sensor - MB1014

The human ranging sensor MB1014 is specifically designed for pedestrian and object detection, and allows multiple sensors to operate simultaneously in the same environment. Powered by 2.5V to 5.5V, the MB1014 provides proximity detection of specific distance objects in an extremely small form factor. The human ranging sensor MB1014 allows users to integrate multiple sensors into a single system with little or no mutual interference that often occurs with other ultrasonic sensors.

Japan Murata Ultrasonic Sensor - MA40S4S

Japan Murata Ultrasonic Sensor MA40S4S

MaxBotix Ultrasonic Level Sensor - MB7066

The ultrasonic level sensor MB7066 is a small but rugged weather-resistant ultrasonic sensor. It meets IP67 protection rating, can prevent dust inhalation, and withstand brief immersion. With high output sound power and continuously variable gain, real-time automatic calibration, and excellent noise suppression algorithms, it effectively achieves noise-free distance readings. Even in the presence of many acoustic or electronic noise sources, stable and reliable distance readings can be obtained. It can measure distances up to...