The MS2374 series devices are quad complementary output line drivers that meet the requirements of ANSI TIA/EIA-422-B and ITU (formerly CCITT) Recommendation V.11.
The MS2576/MS2576T is a low-power quad differential line driver chip for balanced or unbalanced digital data transmission.
The MS2575/MS2575T is a low-power quad differential line receiver chip for balanced or unbalanced digital data transmission.
The MS3585 is a half-duplex, adaptive bus polarity, ±20kV ESD transceiver chip applicable to RS-485 communication systems, with transmission and reception rates up to 10Mbps.
The MS3485/MS3485M/MS3485D is a half-duplex, ±20kV ESD transceiver chip applicable to RS-485 communication systems, with transmission and reception rates up to 10Mbps.
The MS2591 is a low-power, high-ESD RS485 communication interface circuit; in receive mode, its power consumption is only about 365uA, and in shutdown mode, it does not exceed 1uA.
The MS2583/MS2583M is a low-power, 5Mbps, high-ESD RS422 communication interface circuit; in receive mode, its power consumption is only about 0.3mA; A/B terminal ESD withstand voltage is up to ±15kV.
The MS2581/MS2581M is a low-power, high-ESD RS422 communication interface circuit; in receive mode, its power consumption is only about 120uA; A/B terminal ESD withstand voltage is up to ±15kV.
The MS2561 is a low-power, high-ESD RS485 communication interface circuit; in receive mode, its power consumption is only about 120uA, and in shutdown mode, it does not exceed 1uA.
The MS2375 series chips are quad differential line receivers suitable for balanced or unbalanced digital signal transmission systems.
The MS1585/MS1585M/MS1585D is a half-duplex, adaptive bus polarity, ±20kV ESD transceiver chip applicable to RS-485 communication systems, with transmission and reception rates up to 10Mbps.
The MS1285/MS1285M/MS1285D is a half-duplex, ±20kV ESD transceiver chip applicable to RS-485 communication systems, with transmission and reception rates up to 10Mbps.
