Carbon Monoxide Gas Detection Transmitter Ceramic Kiln Safety Monitoring - SKA/CO-BJQ
Detection principle: Electrochemical sensor, natural diffusion sampling
• Gas detected: Carbon monoxide (CO)
• Range: 0~1000ppm (standard); optional 0~500ppm / 0~2000ppm
• Resolution: 1ppm
• Measurement accuracy: ≤±5%FS
• Response time: T90 ≤30s
• Alarm threshold (customizable)
◦ First-level low alarm: 50ppm (recommended by national standard)
◦ Second-level high alarm: 150ppm
• Sensor lifespan: 2~3 years
Product Introduction
Carbon Monoxide Gas Detection Transmitter - Product Overview
A carbon monoxide gas detection transmitter is a fixed gas detection and transmission device used for ceramic kiln safety monitoring. Search keywords: carbon monoxide gas detection transmitter, ceramic kiln safety monitoring, carbon monoxide alarm. The transmitter can continuously detect carbon monoxide concentration in the kiln area and convert the concentration signal into a standard signal output. In ceramic kiln safety monitoring, carbon monoxide gas detection transmitters can reflect kiln combustion and flue gas leakage risks in real time, helping operators respond promptly.
Carbon Monoxide Gas Detection Transmitter - Working Principle
Carbon monoxide gas detection transmitters typically use electrochemical sensors or catalytic combustion sensors to detect carbon monoxide concentration and output electrical signals, which are converted into 4-20mA, RS485, or Modbus signals after circuit processing. In ceramic kiln safety monitoring, carbon monoxide gas detection transmitters support remote calibration and fault self-diagnosis, and can be connected to PLC, DCS, and gas alarm control systems. The transmitter features an explosion-proof housing and high protection rating, making it suitable for high-temperature ceramic kiln environments.
Carbon Monoxide Gas Detection Transmitter - Application Scenarios
Carbon monoxide gas detection transmitters are widely used in tunnel kilns, roller kilns, shuttle kilns, and drying kiln areas of ceramic factories. In ceramic kiln safety monitoring, carbon monoxide gas detection transmitters can be installed near kiln burners, beside flues, and along personnel inspection routes. The transmitter can be interlocked with exhaust fans, shut-off valves, and fire protection systems to achieve automatic response. For large ceramic factories, carbon monoxide gas detection transmitters can form a multi-point monitoring network and upload data uniformly to the control room.
Carbon Monoxide Gas Detection Transmitter - Technical Advantages
Carbon monoxide gas detection transmitters have the advantages of fast response, good stability, and standard output. In ceramic kiln safety monitoring, carbon monoxide gas detection transmitters use industrial-grade sensors and explosion-proof design, making them suitable for long-term operation. The transmitter supports remote calibration, fault self-diagnosis, and HART communication, making maintenance convenient. When selecting a carbon monoxide gas detection transmitter, attention should be paid to detection range, accuracy, response time, explosion-proof rating, and output signal to ensure it meets ceramic kiln safety monitoring requirements.
Main Application Areas
- Ceramic Kiln Monitoring — Real-time CO detection in kiln areas to prevent combustion and flue gas leakage.
- Industrial Furnace Safety — Continuous monitoring of carbon monoxide levels in industrial furnaces and ovens.
- Boiler Room Monitoring — Detects CO leaks in boiler rooms to ensure safe operation.
- Parking Garage Ventilation — Monitors CO levels in enclosed parking areas to control ventilation systems.
- Chemical Plant Safety — Provides early warning of CO leaks in chemical processing facilities.
Keywords：carbon monoxide detector, CO gas transmitter, ceramic kiln safety, industrial CO monitor, fixed gas detector, electrochemical CO sensor, CO alarm transmitter, kiln gas monitoring
