Product Introduction
Intelligent Water Level Overlimit Monitoring Sensor CS-iWM-03 Product Description
The intelligent water level overlimit monitoring sensor is installed at the manhole of the sewer well to monitor in real time whether the water level in the drainage well exceeds the set water surface height. When the water level exceeds the set height, the state of the float level switch changes. After the state quantity is collected and processed by the MCU, an alarm message is sent via GPRS. At the same time, when the water surface height returns to normal, a normal signal is sent to the monitoring center again for timely alarm processing and rescue. The intelligent water level overlimit alarm uses a float level switch to determine whether the water level exceeds the set height, and sends corresponding alarm information through the sensor terminal.
Intelligent Water Level Overlimit Monitoring Sensor CS-iWM-03Detailed Parameters
| Name |
Technical Parameters |
Remarks |
| Operating Frequency Band |
850/900/1800/1900MHZ Multi-slot class10 |
GPRS |
| Network Type |
Class B |
|
| SIM Card Voltage |
3V/1.8V |
|
| Antenna Interface |
50 Ohm Spring Antenna |
|
| Configuration Interface |
RS232 |
|
| Serial Port Baud Rate |
9600~115200bps |
|
| Operating Voltage |
Fuante ER26500M |
3.6V |
| Maximum Operating Current |
500mA |
|
| Maximum Peak Pulse Current |
2A |
|
| Sleep Current |
6－9uA |
|
| Protection Rating |
IP68 |
|
| Operating Temperature |
(-40~+85)℃ |
|
| Storage Temperature |
(-40~+85)℃ |
|
| Self-Check Status Reporting Frequency |
Default 10h |
This value can be set |
| SMS Alarm |
Send alarm and recovery SMS to the designated administrator's mobile phone |
