Czech Dinel Ultrasonic Level Transmitter Level Sensor - ULM-70
Suitable for continuous measurement of various liquids, bulk solids, and paste materials
Unaffected by volatile gases and vapors, temperature, pressure (vacuum), and dust
Can be used in explosive areas (models Xi/XiT) or flammable dust areas (models Xd, XdT)
During measurement, maintain a distance of 300mm or 500mm from the wall (depending on model) to ensure measurement accuracy
Product Introduction
Czech Dinel Ultrasonic Level Transmitter Level Sensor ULM-70 Applications:
Measurement range: 2, 3, 5, 8, 12, 40 m (depending on model)
Output signal: 4-20 mA, HART
Resolution: 1mm
Operating pressure: 0.1MPa to 15MPa (depending on model)
Uses probe-guided high-frequency radar waves to measure time
Real-time display of measured values, electrode length up to 40m (depending on model)
Suitable for continuous measurement of various liquids, bulk solids, and paste materials
Unaffected by volatile gases and vapors, temperature, pressure (vacuum), and dust
Can be used in explosive areas (models Xi/XiT) or flammable dust areas (models Xd, XdT)
During measurement, maintain a distance of 300mm or 500mm from the wall (depending on model) to ensure measurement accuracy
Czech Dinel Ultrasonic Level Transmitter Level Sensor ULM-70 Parameters:
| Output signal |
4~ 20 mA, HART® |
| Current consumption |
4~20 mA / max. 22 mA |
| Resolution |
1mm |
| Warm-up time |
60S |
| Current output load resistance |
230 V; 1.5 A; 80 W; 90 VA max |
| Protection rating |
IP67 |
