US SENIX Remote Ultrasonic Level Sensor - ToughSonic REMOTE 50

I. US SENIXRemote Ultrasonic Level SensorToughSonic REMOTE 50 Description:

The ToughSonic REMOTE 50 is a remote level sensor with a detection range of 50 feet (15.2 meters). This digital sensor is designed for accuracy and long-term durability in remote monitoring applications with a stainless steel housing for ultrasonic sensors. With a stainless steel housing, full epoxy encapsulation, and IP68 rating, it operates in harsh climatic conditions. It is equipped with Senix Lightning Guard, a system that protects power and communication circuits from repeated electrical transients up to 7 kilovolts. The ToughSonic REMOTE 50 uses 20% less energy than the ToughSonic 50. It can be fully configured via SenixVIEW software. This sensor is installed on bridges, docks, and tanks worldwide in mission-critical remote level monitoring applications.

II. US SENIX Remote Ultrasonic Level Sensor ToughSonic REMOTE 50 Features:

316 stainless steel housing.

Sealed epoxy encapsulation for immersion protection.

Rugged piezoelectric ultrasonic transducer.

75% better surge protection than IEC 61000-4-5

Internal electronics hardened.

UV-resistant, potted cable.

III. US SENIX Remote Ultrasonic Level Sensor ToughSonic REMOTE 50 Applications:

SenixVIEW configuration and analysis software controls over 60 performance parameters, as well as dozens of viewing, analysis, and maintenance options.

Addressable Modbus RTU

ASCII or phased high-speed, multi-sensor data acquisition for special applications.

IV. US SENIX Remote Ultrasonic Level Sensor ToughSonic REMOTE 50 Specifications:

Range	50 feet (15.2 meters)
Optimal Range	1 foot - 33 feet (30 cm - 10 meters)
Temperature	-40° to 158°F (-40° to 70°C)
Humidity	0 to 100% operation
Protection	NEMA-4X，NEMA-6P，IP68
Sensors	Rugged piezoelectric
Compensation	Temperature compensation
Resolution	Digital: 0.0034 inches (0.086 mm)
Repeatability	Nominal 0.2% of range at constant temperature; affected by target, distance, environment
Update Rate	5 Hz (200 ms), adjustable via SenixVIEW; also affected by SenixVIEW filter selection

V.US SENIX Remote Ultrasonic Level Sensor ToughSonic REMOTE 50Serial Data Interface

Interface	RS-232 or RS-485 (depending on model)
Baud Rate	9600，Adjustable up to 115200
Format	8 data bits, 1 stop bit, no parity
Protocol	Addressable Modbus RTU (default), ASCII stream (single sensor), extended protocol for custom applications
Measurement Options	Continuous measurement (adjustable rate), measurement on poll

VI.US SENIX Remote Ultrasonic Level Sensor ToughSonic REMOTE 50Mechanical

Mounting	1.5 inch NPT threads, top and bottom
Connection Cable	PUR, 6.5 feet (2 meters)
Total Weight	0.73 kg
Enclosure	316 stainless steel