Inertial Measurement Unit - CS-IMU-09
Specifically designed to detect the galloping state of overhead power lines. Outputs three-axis gyroscope and three-axis accelerometer data, galloping frequency, acceleration, and galloping amplitude.
Outputs galloping trajectory and attitude angles. Digital UART (TTL level) output, low power consumption, self-calibration, and no strict installation requirements.
Product Introduction
CS-IMU-09 Inertial Measurement Unit Features:
Specifically designed to detect the galloping state of overhead power lines. Outputs three-axis gyroscope and three-axis accelerometer data, galloping frequency, acceleration, and galloping amplitude.
Outputs galloping trajectory and attitude angles. Digital UART (TTL level) output, low power consumption, self-calibration, and no strict installation requirements.
CS-IMU-09 Inertial Measurement Unit Main Application Areas:
Power line galloping monitoring systems
CS-IMU-09 Inertial Measurement Unit Main Technical Specifications:
| Model |
CS-IMU-09 |
|
| Electrical Characteristics |
||
| Supply Voltage |
3.3VDC |
|
| Supply Current |
23mA |
|
| Output Method |
UART (TTL level) |
|
| Communication Baud Rate |
9600bps |
|
| Data Output Rate |
－ |
|
| Data Output Format |
16-bit two's complement |
|
| Performance Specifications |
||
| Sensors (X, Y, and Z axes, same below) |
Gyroscope |
Accelerometer |
| Range |
±250 °/s |
±15g |
| Bandwidth |
≥50 Hz |
|
| Nonlinearity |
≤ 0.2% Fs |
≤ 0.5% Fs |
| Start-up Time |
≤ 1 s |
|
| Environmental Characteristics |
||
| Operating Temperature |
-40℃～+70℃ |
|
| Storage Temperature |
-55℃～+100℃ |
|
| Shock Resistance (0.5ms) |
2000 g |
|
| Physical Characteristics |
||
| Weight |
80g |
|
| Dimensions |
59×40×17mm |
|
