Home chevron_right Electronic Components & Chips chevron_right Chips chevron_right Sensor Chips chevron_right Water Level Sensor Chips 
Water Flow Bubble Detector MWFD
Water Flow Bubble Detector

Water Flow Bubble Detector - MWFD

High sensitivity, fast response;
Can detect liquids with different TDS (0-3000ppm);
Can detect viscous liquids;
Non-contact capacitance detection method, high-frequency excitation with strong penetration.

Model: MWFD

Product Introduction

The water flow bubble detector MWFD (Minyuan Water Flow Detector) uses a high-frequency capacitance detection chip to measure changes in the dielectric constant of the liquid inside the tube: different capacitance values reflect whether the tube contains air or liquid. When air is detected, it outputs a high level for alarm. The sensor has strong penetration, effectively overcoming issues such as different pipe materials, thick pipe walls, and differences in liquid conductivity. The sensor has fast response, with a detection cycle up to 10ms, and combined with a microprocessor algorithm, it can distinguish the current state within 300ms. The built-in microprocessor chip allows for parameter calibration, temperature compensation, detection algorithms,and alarm threshold configuration.


1. Product Advantages
High sensitivity, fast response;
Can detect liquids with different TDS (0-3000ppm);
Can detect viscous liquids;

Non-contact capacitance detection method, high-frequency excitation with strong penetration.

2. Application Scenarios
Water flow bubble and dry-run alarm for smart home appliances such as water purifiers, coffee machines, milk tea machines, air conditioners, and floor scrubbers;
Bubble detection in medical infusion tubes, oxygen concentrators, ventilators, etc.;
Detection of water flow bubbles and dry-running in various industrial and consumer pumps and water pipes.

3. Specifications
Supply voltage: DC 5V±0.25V (ripple 100mV)
Operating current: <10mA
Spring inner diameter: φ7mm
Water pipe diameter: φ6~7mm non-metallic outer wall (threshold can be modified to adapt to different pipe diameters)
Operating ambient temperature: -20℃~+85℃
Storage temperature: -20℃~+85℃
Output method: high/low level output, 5V represents alarm