The Differential Liquid Level Module LDM (Liquid-level -Differential-Mini) uses differential capacitive measurement principle, measuring dielectric constant changes via a capacitive sensing chip. The module outputs capacitance values as digital signals, which are converted into liquid level height, etc.
The Single-ended Liquid Level Module LSP (Liquid-level -Single-ended-Pro) uses single-ended ground capacitive measurement principle, measuring dielectric constant changes via a capacitive sensing chip. The module outputs capacitance values as digital signals, which are converted into liquid level height, etc.
The Liquid Level Sensing Module LLM (Liquid-level Meter) measures dielectric constant changes through a capacitive high-frequency circuit, and the module outputs liquid capacitance values as digital signals.
WS11 (Water Sensor-MC11S) is a capacitive, non-contact smart water immersion module.
The Cascadable Multi-point Inclinometer RTS (Rock Tilt Sensor) can be networked in multi-point series based on the RS485 bus.
The Conductivity, Level and Temperature Composite Sensor ECLT (Electrical Conductivity, Level and Temperature sensor) is based on the high-frequency differential capacitive sensing SoC chip MCP61 combined with embedded algorithms.
The Water Flow Bubble Detector MWFD (Minyuan Water Flow Detector) uses a high-frequency capacitance detection chip to measure changes in the dielectric constant of the liquid inside the tube: different capacitance values reflect whether the tube contains air or liquid. When air is detected, a high level is output for alarm.
The Wading Water Sensor WWS (Wading Water Sensor) is a capacitive, non-contact smart sensor.
WS61 (Water Sensor) is a capacitive, non-contact smart water immersion sensor.
The Water Immersion Sensor WLD (Water Leak Detector) is a capacitive, non-contact smart water immersion sensor.
The Deep Water Level Sensor DLM1 (Deep Liquid-level Meter) is a level sensor that senses continuous liquid level changes through capacitive high-frequency dielectric constant measurement.
The Electronic Water Gauge Level Sensor MER-MCP1081-260-26 is based on capacitive non-contact measurement principle, with the main sensing chip being the ten-channel multi-mode wideband digital capacitance processor chip MCP1081S.
