Product Introduction
CAN Bus Pressure Transmitter CS-PT607A Product Features and Applications
0.25% F.S accuracy; OEM customizable; multiple pressure ranges; threaded mounting, CAN bus output.
Applications: hydrological monitoring, constant pressure water supply, variable frequency water supply, tail dam water level, sewage treatment.
CAN Bus Pressure Transmitter CS-PT607AProduct Description
The CS-PT607A pressure transmitter features high reliability, high stability, and high accuracy. Widely used for gas and liquid pressure detection, such as water, oil, liquids, and gases.
The CS-PT607A embeds a CAN fieldbus controller and transceiver, enabling bidirectional communication based on CANBUS. CAN bus is a multi-master network protocol where any node on the network can actively send messages to other nodes at any time. By arbitrating message priorities, transmission delays are minimized and conflicts are avoided. The direct communication distance of CAN can reach up to 10km, with a communication rate of up to 1Mbps.
CAN Bus Pressure Transmitter CS-PT607ATechnical Parameters
| General |
Value |
Remarks |
| Pressure Range |
0~2MPa……60MPa |
1MPa=10bar 1bar≈14.5PSI 1 atmosphere = 98kPa |
| Overload Pressure |
1.5 times rated pressure (1.5X) |
|
| Burst Pressure |
3 times rated pressure (3X) |
|
| Accuracy |
0.25%F.S |
|
| Working Current |
<70mA |
|
| Compensated Temperature |
-25℃～85℃ |
|
| Operating Temperature |
-40℃ ~85℃ |
|
| Protection Class |
IP65 |
|
| Communication Distance |
Up to 10km |
|
| Power Supply |
10 ~ 30VDC |
|
| Communication Rate |
MaximumRateUp to 1Mbps |
(Configurable) |
| Electrical Connection |
Hirschmann |
|
| Pressure Port |
M20×1.5、G1/4、G1/2、R1/2、NPT1/2 |
|
| Pressure Type |
Gauge G, Sealed Gauge S |
|
| Standard Support |
Supports CAN2.0A and CAN2.0B standards |
|
| Protocol Support |
Supports CANopen protocol |
|
