Japan Figaro FIGARO Methane Gas Pre-calibrated Module - FSM-T-01

1. Japan Figaro FIGARO Methane Gas Pre-calibrated ModuleFSM-T-01Description:

FSM-T-01It is a pre-calibrated module for methane gas alarms. This module usesTGS2611sensor combined with optimized classic circuit to measure methane gas concentration, pre-calibrated by Figaro's high-precision calibration equipment, and produced with mature aging process. This module is designed to maximize savings for users in development and production costs, making it easier and simpler for users to manufacture civil natural gas alarms.
For user convenience, this module has two different interfaces. The TTL-level asynchronous communication interface allows users to read real-time gas concentration with very simple commands, and also allows setting different alarm thresholds via communication programming. When the gas concentration reaches the set value, an alarm output signal is automatically generated on the Alarm terminal. In addition, this module is designed with a socket connection, small and flexible, allowing easy periodic replacement of the sensor. For a certain motherboard, different modules can also be replaced by simple plugging and unplugging to achieve methane or other gas detection and alarm functions.

2. Japan Figaro FIGARO Methane Gas Pre-calibrated ModuleFSM-T-01 Features:

Gas concentration output digitally via communication
Programmable alarm point output
Factory calibrated, temperature compensated
Small size, low cost

3. Japan Figaro FIGARO Methane Gas Pre-calibrated ModuleFSM-T-01Applications:

* Front-end solution for methane gas alarms
* Simple methane gas alarm output

4. Japan Figaro FIGARO Methane Gas Pre-calibrated ModuleFSM-T-01 Parameters:

Product Name	Methane Gas Sensor Module
Model	FSM-T-01
Gas Sensor	TGS2611-E00
Detection Range	0~20% LEL
Accuracy Level	≤ ±2.5% LEL(4000ppm~5000ppm)
	≤ ±5% LEL (Full Range)
Gas Response Time (T90)	≤ 30 seconds
Operating Conditions	-10℃~+55℃,25~95%RH
Storage Conditions	-25℃~+60℃,20~95%RH
Input Voltage	5.0±0.2V DC
Power Consumption	≤ 0.5 W
Net Weight	15g Below
Dimensions	27.2×22.8×17 mm
Standard Test Conditions	Environmental Conditions	20±2℃,65±5%RH
	Circuit Conditions	5.0±0.2V DC
	Preheat Before Test	≥ 5 Minutes