High-Frequency Water Supply Pressure Transmitter - CS-PT1010
0.5% F.S accuracy;
Can be made OEM;
Anti-pressure surge buffer connector;
Multiple pressure ranges and signal outputs;
Multiple connectors and pressure interfaces;
Non-polarity two-wire current output;
Intrinsic safety explosion-proof, isolated explosion-proof;
CE certification;
Configurable local display.
Product Introduction
1. High-Frequency Water Supply Pressure Transmitter CS-PT1010 Product Description
The CS-PT1010 series pressure transmitter is a high-temperature-resistant, cost-effective product for civil and industrial use. It is widely used in constant pressure water supply, boiler pressure control, and other water, oil, and mildly corrosive liquids and gases.
The product features a stainless steel structure, a pressure core from an international brand, and a dedicated V/I conversion circuit, allowing easy calibration of zero and full scale. It has passed intrinsic safety explosion-proof certification, isolated explosion-proof certification, and CE certification.
The two-wire loop output leads are non-polar; the three-wire voltage output type is dual-use for AC and DC.
The buffer connector can prevent water hammer or impact of 5 to 10 times the range.
In addition to more than ten standard structures and output specifications, our team is also ready to customize products with various special requirements for volume users to ensure batch application needs.
2. High-Frequency Water Supply Pressure Transmitter CS-PT1010 Product Features and Application Fields
0.5% F.S accuracy; can be made OEM; anti-pressure surge buffer connector; multiple pressure ranges and signal outputs; multiple connectors and pressure interfaces; non-polarity two-wire current output; intrinsic safety explosion-proof, isolated explosion-proof; CE certification; configurable local display.
Applications: variable frequency water supply, compressed natural gas, water supply telemetry, central air conditioning, automatic monitoring systems, real-time oil well management, pipeline and tank pressure measurement, boiler heating systems.
3. High-Frequency Water Supply Pressure Transmitter CS-PT1010 Technical Parameters
| General |
Value |
Remarks |
|||
| Pressure Range |
0~0.5MPa......60MPa |
1MPa=10bar 1bar≈14.5PSI 1PSI=6.8965kPa 1 kgf/cm2 = 1 atmosphere 1 atmosphere ≈ 98 kPa |
|||
| Overload Pressure |
1.5 times rated pressure (1.5X) |
||||
| Burst Pressure |
3 times rated pressure (3X) |
||||
| Accuracy |
±0.5%F.S, ±1.0%F.S |
||||
| Stability |
Typical 0.25% F.S, max: 0.4% F.S |
||||
| Operating Temperature |
－40℃~125℃ |
||||
| Compensated Temperature |
－10℃~70℃ |
|
|||
| Compatible Media |
All corrosive media compatible with 1Cr18Ni9Ti |
|
|||
| Electrical Performance |
Two-wire |
Three-wire |
|
||
| Output Signal |
4~20mA |
0~5V |
0~10V |
|
|
| Power Supply |
10~30Vdc |
8~30Vdc |
12~30Vdc |
|
|
| Load Resistance |
(U-10)/0.02(Ω) |
＞100kΩ |
|
||
| Insulation |
＞100M Ω@50V |
|
|||
| Dielectric Strength |
500V@60 second |
|
|||
| Vibration/Shock |
10g/5~2000Hz, axes X/Y/Z20g sine 11ms |
|
|||
| Pressure Durability |
2×10^6 pressure cycles @25℃ |
|
|||
| Display Range |
-9999~99999@PT1010A/C |
|
|||
| Electrical Connection |
Terminal block + waterproof cable outlet, housing protection IP65 |
|
|||
| Pressure Connection |
M20×1.5，G1/2，G1/4，NPT1/4，NPT1/2 |
|
|||
| Pressure Type |
Gauge G, Absolute A |
Response time: 10ms |
|||
| Certifications |
Isolated Explosion-proof D EU Electrical Safety Standard CE |
|
|||
| Electromagnetic Compatibility |
Electromagnetic emission: EN50081-1/-2; Electromagnetic immunity: EN50082-2 |
|
|||
