Home chevron_right Sensors chevron_right Gas Sensor 
Industrial and Commercial Point-Type Combustible Gas Detector AMT/GTYQ-AX01S
Industrial and Commercial Point-Type Combustible Gas Detector

Industrial and Commercial Point-Type Combustible Gas Detector - AMT/GTYQ-AX01S

Industrial and Commercial Point-Type Combustible Gas Detector

Product Model: AMT/GTYQ-AX01S

Product Introduction

The detector uses imported sensors and features long-term stability, short response time, and strong anti-interference capability.

The detector uses diffusion sampling, converting the weak signal output by the sensor into a digital signal and uploading it to a combustible gas alarm controller or PLC and other equipment.

The detector, together with a combustible gas alarm controller or PLC, forms an alarm control system.

工作电压 DC15V~30V, maximum power 2W when input is DC24V
Detection gas Methane
Alarm setpoint Low alarm: 20%LEL, high alarm: 50%LEL
Operating temperature range -40℃~70℃
Operating humidity range Relative humidity: ≤93% (40℃±2℃)
Relative humidity not exceeding 95% (at 40℃)
Operating pressure range 86kpa~106kpa
(*101kPa is one standard atmospheric pressure)
Preheating Time 180S
Explosion-proof marking Ex db IIC T6 Gb
Storage conditions The product should be stored indoors in a ventilated, dry environment free of corrosive gases, with a storage temperature of 0℃~+40℃ and relative humidity ≤85%.
Transmission method Bus RS485
Output method DC24V, 200mA, passive contact (DC24V/1A)
防护等级 IP66
Gas sensor lifespan 3 years (in clean air)

Main Application Areas

  • Oil and Gas Industry — Detection of combustible gas leaks in refineries, pipelines, and storage facilities to prevent fire and explosion hazards.
  • Chemical and Petrochemical Plants — Continuous monitoring of flammable gas concentrations in production areas, ensuring process safety and compliance.
  • Mining Operations — Monitoring methane and other combustible gases in underground mines to protect workers and equipment.
  • Municipal and Environmental Protection — Detection of combustible gases in wastewater treatment plants, landfills, and other municipal facilities.
  • Firefighting and Emergency Response — Rapid identification of combustible gas leaks during firefighting and rescue operations.

Keywords:combustible gas detector, point type gas detector, industrial gas detector, commercial gas detector, gas leak detector, flammable gas sensor, gas detection system, AMT GTYQ-AX01S