Swiss Rotronic Duct-Mounted Temperature and Humidity Transmitter - M12D2HT-4X
Duct temperature and humidity, 2-wire, 4~20 mA, 0~100 %rh, -30~70℃
Enclosure protection rating IP65
Sensor: Hygromer® AC-1, Pt100 1/3DIN
Accuracy at 23℃: ±1.5%RH, ±0.3℃
Probe repeatability: <0.5%RH; <0.1℃
Probe long-term stability: <0.5%RH; <0.1℃
Max wind speed: 20m/s
Operating conditions: –40~60℃, 0~100%RH
Product Introduction
Swiss Rotronic Duct-Mounted Temperature and Humidity Transmitter M12D2HT-4XTypical Applications:
Textile
Pharmaceutical
Semiconductor Industry
Museums
Archives
Other indoor high-precision measurements
Swiss Rotronic Duct-Mounted Temperature and Humidity Transmitter M12D2HT-4X Parameters:
| M12D2HT-4X |
Duct temperature and humidity, 2-wire, 4~20 mA, 0~100 %rh, -30~70℃ |
| Fixed probe duct temperature and humidity transmitter |
|
| 2×2 2-wire and 3/4 3-wire options available |
|
| Enclosure protection rating |
IP65 |
| Digital calibration |
|
| Typical applications |
Pharmaceutical, textile, semiconductor industry, museums, archives, other indoor high-precision measurements |
| Sensors |
Hygromer® AC-1 ，Pt100 1/3DIN |
| Accuracy at 23℃ |
±1.5%RH, ±0.3℃ |
| Probe repeatability |
<0.5%RH; <0.1℃ |
| Probe long-term stability |
<0.5%RH; <0.1℃ |
| Probe response time |
<15 seconds (at 23℃, τ=63, 1m/s wind speed) |
| Probe protection |
SP-W15 |
| Max wind speed |
20m/s |
| Probe calibration |
Using handheld instrument adjustment, HygroPlam 3 + ACRLXB5 |
| Operating conditions |
–40~60℃，0~100%RH |
| Power supply |
12~35VDC、12~24VAC |
| Analog output |
0~1V, 0~5V, 0~10V, 0~20mA, 4~20mA selectable |
| Load capacity |
Current output <250Ω; 2-wire 500Ω/24VDC; voltage output >1000Ω |
| Protection rating |
IP65 |
| Weight |
300g |
| Dimensions |
Enclosure 154 x 73 x 48 mm, probe dimensions 207 x 15mm Ф |
