German FALCOM Advanced Vehicle Tracking System - BOLERO-LT2

FALCOM Advanced Vehicle Tracking System BOLERO-LT2 Description

BOLERO-LT2 consists of a quad-band GSM/GPRS engine (GSM 850/900/1800/1900 MHz), a 50-channel high-sensitivity GPS core based on µ-blox engine, and an embedded configuration software for versatile location-based applications. The new device can be easily integrated into a variety of new applications, extending from real-time navigation and positioning to remote tracking and monitoring. This product is suitable for indoor applications, ideally for fixed installation. The concept of this device is to act as a mobile client to directly execute a wide range of high-volume, low-cost flexible system solutions such as AVL, fleet management, vehicle security and recovery, and other related fields.

The embedded mobile client terminal application's tracking function combines various alarm messaging functions. Configurable alarm messages include the device's current location and various status reports. The physical interface to the terminal application is implemented through a 5-pin connector. It provides a serial port giving you great flexibility in device configuration, receiving GPS positioning data, and 1 digital input for monitoring vehicle ignition.

Depending on how the BOLERO-LT2 system is set up, its corresponding events can be used for various notification purposes.

The embedded software can be controlled by commands such as 'PFAL' to perform specific operations, read or set specific configurations in the BOLERO-LT2 device. These commands are applicable to various operation types such as SMA, CSD, TCP, and SMTP.

BOLERO-LT2 provides geofencing function supporting area management, route verification, restricted locations, parking zones, and exception reports for multiple events such as arrival, departure, delivery, pickup, illegal entry, unauthorized actions, etc. BOLERO-LT2 includes a data logger that allows you to archive different location information sequentially for up to 45 days for subsequent analysis and evaluation (e.g., using an archive interval of up to 20 seconds).

FALCOM Advanced Vehicle Tracking System BOLERO-LT2Features

• Advanced GSM/GPRS technology supports two-way communication
• New GPS technology for positioning
• Compact, low cost and lightweight
• Provides high performance and flexible applications
• Custom firmware configuration
• Different communication channels
• Sends reports for multiple events and statuses
• Remote management and firmware upgrade
• Allows creation of custom protocols
• Data logger function
• Vehicle main battery power
• Backup battery supports main power
• Custom housing and packaging design
• Built-in GPS/GSM antenna
• E1/CE certification


FALCOM Advanced Vehicle Tracking System BOLERO-LT2 Specifications

GSM/GPRS Core	Quad-band GSM/GPRS engine 850/900/1800/1900 MHz GPRS class 10, class B TCP/IP (accessed via PFAL commands) Network (TCP/IP/UDP/HTTP/SMTP)
GPS Core	50 Channel GPS receiver AGPS offline / autonomous Protocols: NMEA, FALCOM (binary) Accuracy: - Positioning 2.5 m - SBAS 2 m Acquisition: - TTFF hot start: < 1 s average - Cold start: 26 sec. Sensitivity: - Cold start: -148 dBm - Tracking: -160 dBm Range: - Speed: 500 m/s (972 knots) - Altitude: 50,000 m - Update rate: 1 Hz
Processor Core	ARM7/TDMI Memory: 8 MB Flash / 2 MB RAM
Electrical Characteristics	Power supply: +10.8 V ~ +32 V DC Rechargeable lithium battery backup 1000 mAh
Physical Characteristics	Dimensions (L x W x H): 85 x 56 x 24 mm Weight: approx. 90 g
Temperature Range	Storage: -40 °C ~ +85 °C Operating: -40 °C ~ +85 °C GSM: -40 °C ~ +85 °C Battery: -20 °C ~ +60 °C Charging: 0 °C ~ +45 °C
Motion Sensor	3-Axis motion sensor
Interfaces	1 x Digital input (Ignition) 1 x RS232 V24 level (RX, TX, GND – For device configuration only, cannot connect external devices. 1 x SIM card reader supporting 1.8/3 V SIM cards 4 x freely programmable LED indicators 1 x freely programmable button
Serial Data Rate	4800 bps...115200 bps