German FALCOM Vehicle GPS Tracker - STEPPIII-UX
High-sensitivity satellite navigation (50-channel U-BLOX 5 engine)
AGPS support
4G communication (SMS, VOICE, DATA, GPRS, TCP/IP, EMAIL)
Fully customizable behavior for customers
Vehicle security and recovery / anti-theft alarm / motion detection
Online tracking / driver log / history records
Zone management / geofencing
Remote management / firmware upgrade
Certifications (FCC, PTCRB, E1, CE)
Motion sensor
Product Introduction
Vehicle GPS Tracker STEPPIII-UX Product Description:
The STEPPIII-UX is a freely configurable intelligent tracking device that can fully adapt to user needs. It primarily serves as a mobile client for various system solutions such as AVL, fleet management, vehicle security and recovery. The device can work completely independently or in conjunction with sensors and actuators. It can adapt to existing tracking solutions and is easily configured to collect or exchange relevant information for servers or users. A common example is sending status reports or detailed alarm messages directly via SMS to users and/or to tracking servers via TCP.
Users benefit most from the combination of comfort and safety, such as emitting detective alarm-like sounds in emergency situations. Driver logs and data recording functions are integrated into Falcom's history recording feature. Geofencing can be used to report violations of predefined routes or areas (e.g., if a vehicle enters or leaves a specific area/restricted zone). Integrating all these functions into one device concept greatly reduces time-to-market and provides low-cost tracking and security solutions.
Vehicle GPS Tracker STEPPIII-UXFeatures:
High-sensitivity satellite navigation (50-channel U-BLOX 5 engine)
AGPS support
4G communication (SMS, VOICE, DATA, GPRS, TCP/IP, EMAIL)
Fully customizable for customers
Vehicle security and recovery / anti-theft alarm / motion detection
Online tracking / driver log / history records
Zone management / geofencing
Remote management / firmware upgrade
Certifications (FCC, PTCRB, E1, CE)
Additional I/O ports
Motion sensor
Vehicle GPS Tracker STEPPIII-UXTechnical Specifications:
GSM/GPRS Core:
Quad-band module
850/900/1800/1900 MHz
GPRS Class 10, Class B
TCP/IP protocol
GPS Core:
50-channel GPS receiver
AGPS offline/autonomous
Protocols: NMEA, GGA, GGL, GSA, GSV, RMC, WGS-84
Accuracy: Position <2.5m, SBAS <2m
Sensitivity:
Acquisition: 1-160dBm
Tracking: -160dBm
Cold start: -144dBm
Limits:
Speed: 500m/s
Altitude: 50m
Processor Core:
ARM7/TDMI
Memory: 2MB/512KB
Electrical Characteristics:
Power supply: 10.8V ~ 32V DC
Rechargeable lithium battery 1000mAh
Physical Characteristics:
Dimensions: 55×88×22mm
Weight: approx. 120g
Temperature Range:
Storage: -40℃ ~ +85℃
Operating: -40℃ ~ +85℃
GSM:-30℃~+80℃
Battery option: -20℃ ~ +60℃
Charging: 0℃ ~ +45℃
Motion sensor: Three-axis motion sensor