The MS8241 is a high-speed voltage feedback amplifier with the high-speed conversion characteristics of current feedback amplifiers, applicable in all traditional voltage feedback op-amp applications.
The MS5212/5212M is a 12-bit single-channel voltage-output DAC with a three-wire serial interface, compatible with TMS320, SPI, QSPI, and Microwire serial interfaces.
The MS5231M is a single-channel serial 8-bit voltage-output digital-to-analog converter (DAC) with a high-impedance buffered reference input.
The MS5262D is a 12-bit four-channel voltage-output DAC with a three-wire serial interface, compatible with TMS320, SPI, QSPI, and Microwire serial interfaces.
The MS5314 is a 10-bit four-channel voltage-output DAC with an interface compatible with TMS320, SPI, QSPI, and Microwire serial interfaces.
The MS5541/MS5542 is a single-channel, 16-bit, serial-input, voltage-output DAC powered by a 2.7V to 5.5V single supply, with an output range of 0V to VREF.
The MS5611D is a 12-bit single-channel voltage-output DAC with a four-wire serial interface, compatible with TMS320, SPI, QSPI, and Microwire serial interfaces.
The MS5612M is a 12-bit two-channel voltage-output DAC with a three-wire serial interface, compatible with TMS320, SPI, QSPI, and Microwire serial interfaces.
The MS5614/5614T is a 12-bit four-channel voltage-output DAC with a four-wire serial interface, compatible with TMS320, SPI, QSPI, and Microwire serial interfaces.
The MS5620 is a four-channel serial 8-bit voltage-output digital-to-analog converter (DAC) with a high-impedance buffered reference input.
The MS5224D is a 12-bit four-channel voltage-output DAC with a three-wire serial interface, compatible with TMS320, SPI, QSPI, and Microwire serial interfaces. Data is 16 bits, including control bytes and 12-bit DAC data.
The MS9708/MS9710/MS9714 are 8-bit/10-bit/14-bit high-speed, low-power D/A converters.
The MS5602 is a low-power, ultra-high-speed video DAC. It converts digital signals to analog signals at sampling rates from DC to 20MHz.
The MS2502 is a low-power, ultra-high-speed video DAC. It converts digital signals to analog signals at sampling rates from DC to 20MHz.
The MS703D is a high-speed, low-power analog switch chip with an operating voltage range of +1.8V to +5.5V. It features low inter-symbol interference, high channel noise isolation, and wide bandwidth.
The MS713/MS713T is a single-chip CMOS quad selectable switch with low power consumption, high switching speed, low on-resistance, low leakage, and high bandwidth.
The MS714 is a single-chip CMOS octal selectable switch with low power consumption, high switching speed, low on-resistance, low leakage, and high bandwidth.
The MS715T is a single-chip CMOS ten-channel selectable switch with low power consumption, high switching speed, low on-resistance, low leakage, and high bandwidth.
The MS2244 is an integrated video switch that selects one of three input video or audio signals. The chip integrates a 75-ohm driver circuit and can directly drive TV monitors.
The MSUSB30 is a high-speed, low-power double-pole double-throw USB analog switch chip with an operating voltage range of +1.8V to +5.5V. It features low inter-symbol interference, high channel noise isolation, and wide bandwidth.
The MS8816/MS8816P uses advanced manufacturing processes, featuring low power consumption, high reliability, and good isolation. The circuit contains an 8×16 analog switch array, 7-to-128 address decoding, and latch circuits.
The DT3100 is a floating current driver IC used to regulate the current flowing through an LED string.
The WD10-3111 is a high-voltage floating current driver IC used to regulate the current flowing through an LED string.
The WD15-S30A is an AC-direct LED driver IC with 4 internal steps.
The WD15-S30T is an AC-direct LED driver IC with 4 internal steps.
The WD35-S28A is an AC-direct LED driver IC with 2 internal channels and 2 external channels.
The WD35-S28T is an AC-direct LED driver IC with 2 internal steps and 2 external steps, respectively.
The SS8102 is a high-efficiency, constant-current, step-down synchronous half-bridge DC/DC converter driver chip with a maximum output current capability of 25A and PWM dimming resolution exceeding 100K:1.
The GP8110Q is a 1-TAP AC-direct LED driver. The output current is designed to be large.
The GP8100 is a direct AC-line driver IC that meets stringent power efficiency and PF (power factor) requirements, and can optimize low-cost LED lighting systems with various features while saving PCB space.
The SS8100 is a high-efficiency, constant-current, step-down half-bridge DC/DC converter driver chip with a maximum output current capability exceeding 15A and PWM dimming resolution exceeding 50000:1.
The PU-S335LON-MA100 series is a revolutionary, high-efficiency, energy-saving light source for germicidal and medical applications, combining the lifespan and reliability advantages of LEDs with the brightness of traditional light sources.
This UVC germicidal device features a small size. Most products on the market are 3.5*3.5mm, while this one is 2*1.6mm, suitable for miniaturized sterilization applications such as earphones.
The WH-UVC001-VO is a static UVC LED germicidal module used for inhibiting bacteria in air and liquids.
The PU-S335SCL-P05P20 series is a revolutionary, high-efficiency, energy-saving light source for germicidal and medical applications, combining the lifespan and reliability advantages of LEDs with the brightness of traditional light sources.
UV Germicidal Lamp - WH UVC PU-S335QL-I100UVC is a UV lamp that uses the ultraviolet band for sterilization.
UV Germicidal Lamp - WH UVC PB2D-S335QL-W27 is a UV lamp that uses the ultraviolet band for sterilization.
UV Germicidal Lamp - WH PU-S668WF-W27P3 is a UVC germicidal lamp that uses the ultraviolet band for sterilization.
UV Germicidal Lamp - WH PU-S355BSZ-MA100AC-IP is a germicidal lamp that uses the ultraviolet band for sterilization.
The ALPU-C is a high-end IC in the ALPU series.
The ALPU-CV is a high-end IC in the ALPU series.
The ALPU-P is a strong encryption chip, even under turbulent conditions such as static electricity.
The GEN-FA has 32 Kbits of EEPROM. Configuration data and user data can be stored in the EEPROM.
KEROS-Lite CK02AX is a high-performance AES256 codec.
KEROS-Lite is a high-performance 64-byte OTP memory family with an advanced built-in AES 256 security engine and encryption functions.
The TF-S166 is a dedicated output channel for 3-channel RGB LED driver circuits. It also includes internal intelligent digital port data latching and signal shaping amplification driver circuits.
Special spectrum, using special phosphor formula, continuous spectrum meets RG0 test requirements, anti-blue-light, anti-myopia LED lighting beads.
The MS1192 is an adapter chip compliant with the HBS bus specification (Japan Electronics Industry Association), with transmit and receive data functions. It uses AMI encoding in the transceiver unit, can interconnect via twisted pair, and signal transmission uses differential mode.
The MS90C104 chip can convert 5 channels of low-voltage differential signaling (LVDS) into 35-bit TTL data.
The MS90C365 chip can convert 18-bit TTL data into 3 channels of low-voltage differential signaling (LVDS).
The MS90C366 chip can convert 3 channels of low-voltage differential signaling (LVDS) into 21-bit TTL data.
The MS90C385B chip can convert 28-bit TTL data into 4 channels of low-voltage differential signaling (LVDS).
The MS90C385G chip can convert 28-bit TTL data into 4 channels of low-voltage differential signaling (LVDS).
The MS90C386 chip can convert 4 channels of low-voltage differential signaling (LVDS) into 28-bit TTL data.
The MS2652D is a low-power, high-data-rate two-channel CMOS differential LVDS signal bus driver chip supporting data reception rates exceeding 155.5 Mbps (77.7 MHz).
The MS90C032/MS90C032T is a low-power, high-data-rate four-channel CMOS differential LVDS signal receiver chip.
The MS90C031 is a low-power, high-data-rate four-channel CMOS differential LVDS signal bus driver chip supporting data reception rates exceeding 155.5 Mbps (77.7 MHz).
