MS8241 is a high-speed voltage feedback amplifier with the high-speed conversion characteristics of current feedback amplifiers, applicable in all traditional voltage feedback op-amp applications.
MS5212/5212M is a 12-bit single-channel voltage-output DAC with a three-wire serial interface, compatible with TMS320, SPI, QSPI, and Microwire serial ports.
MS5231M is a single-channel, serial, 8-bit voltage-output digital-to-analog converter (DAC) with a high-impedance buffered reference input.
MS5262D is a 12-bit four-channel voltage-output DAC with a three-wire serial interface, compatible with TMS320, SPI, QSPI, and Microwire serial ports.
MS5314 is a 10-bit four-channel voltage-output DAC with an interface compatible with TMS320, SPI, QSPI, and Microwire serial ports.
MS5541/MS5542 is a single-channel, 16-bit, serial-input, voltage-output DAC, powered by a 2.7V to 5.5V single supply, with an output range of 0V to VREF.
MS5611D is a 12-bit single-channel voltage-output DAC with a four-wire serial interface, compatible with TMS320, SPI, QSPI, and Microwire serial ports.
MS5612M is a 12-bit two-channel voltage-output DAC with a three-wire serial interface, compatible with TMS320, SPI, QSPI, and Microwire serial ports.
MS5614/5614T is a 12-bit four-channel voltage-output DAC with a four-wire serial interface, compatible with TMS320, SPI, QSPI, and Microwire serial ports.
MS5620 is a four-channel, serial, 8-bit voltage-output digital-to-analog converter (DAC) with a high-impedance buffered reference input.
MS5224D is a 12-bit four-channel voltage-output DAC with a three-wire serial interface, compatible with TMS320, SPI, QSPI, and Microwire serial ports. Data is 16 bits, including control byte and 12-bit DAC data.
MS9708/MS9710/MS9714 are 8-Bit/10-Bit/14-Bit high-speed, low-power D/A converters.
MS5602 is a low-power, ultra-high-speed video digital-to-analog converter. MS5602 converts digital signals to analog signals at sampling rates from DC to 20MHz.
MS2502 is a low-power, ultra-high-speed video digital-to-analog converter. MS2502 converts digital signals to analog signals at sampling rates from DC to 20MHz.
MS703D is a high-speed, low-power analog switch chip with an operating voltage range of +1.8V to +5.5V. It features low inter-symbol skew, high channel isolation, and wide bandwidth.
MS713/MS713T is a single-chip CMOS four-channel selectable switch with low power consumption, high switching speed, low on-resistance, low leakage, and high bandwidth.
MS714 is a single-chip CMOS eight-channel selectable switch with low power consumption, high switching speed, low on-resistance, low leakage, and high bandwidth.
MS715T is a single-chip CMOS ten-channel selectable switch with low power consumption, high switching speed, low on-resistance, low leakage, and high bandwidth.
MS2244 is an integrated video switch that selects one of three input video or audio signals. The chip integrates a 75-ohm driver circuit and can directly drive TV monitors.
MSUSB30 is a high-speed, low-power double-pole double-throw USB analog switch chip with an operating voltage range of +1.8V to +5.5V. It features low inter-symbol skew, high channel isolation, and wide bandwidth.
MS8816/MS8816P uses advanced manufacturing processes, featuring low power consumption, high reliability, and good isolation. The circuit contains an 8×16 analog switch array, 7 to 128 address decoding, and latch circuits.
DT3100 is a floating current driver IC used to regulate the current flowing through an LED string.
WD10-3111 is a high-voltage floating current driver IC used to regulate the current flowing through an LED string.
WD15-S30A is an AC direct LED driver IC with 4 internal steps.
WD15-S30T is an AC direct LED driver IC with 4 internal steps.
WD35-S28A is an AC direct LED driver IC with 2 internal channels and 2 external channels.
WD35-S28T is an AC direct LED driver IC with 2 internal steps and 2 external steps, respectively.
SS8102 is a high-efficiency, constant-current, step-down synchronous half-bridge DC/DC converter driver chip with a maximum output current capability of 25A and PWM dimming resolution exceeding 100K:1.
GP8110Q is a 1 TAP AC direct LED driver. The output current is designed to be maximum.
GP8100 is a direct AC line driver IC that meets the strictest power efficiency and PF (power factor) requirements, and can optimize various features of low-cost LED lighting systems with small PCB space.
SS8100 is a high-efficiency, constant-current, step-down synchronous half-bridge DC/DC converter driver chip with a maximum output current capability exceeding 15A and PWM dimming resolution exceeding 50000:1.
The PU-S335LON-MA100 series is a revolutionary, high-efficiency, energy-saving light source for germicidal and medical applications, combining the lifespan and reliability advantages of LEDs with the brightness of traditional light sources.
This UVC ultraviolet germicidal device features a small size. Most products on the market are 3.5*3.5mm, while this one is 2*1.6mm, suitable for miniaturized germicidal applications such as earphones.
WH-UVC001-VO is a static UVC LED germicidal module used for inhibiting bacteria in air and liquids.
The PU-S335SCL-P05P20 series is a revolutionary, high-efficiency, energy-saving light source for germicidal and medical applications, combining the lifespan and reliability advantages of LEDs with the brightness of traditional light sources.
UV Germicidal Lamp - WH UVC PU-S335QL-I100UVC is a UV lamp that uses the ultraviolet band for sterilization.
UV Germicidal Lamp - WH UVC PB2D-S335QL-W27 is a UV lamp that uses the ultraviolet band for sterilization.
UV Germicidal Lamp - WH PU-S668WF-W27P3 is a UVC germicidal lamp that uses the ultraviolet band for sterilization.
UV Germicidal Lamp - WH PU-S355BSZ-MA100AC-IP is a germicidal lamp that uses the ultraviolet band for sterilization.
ALPU-C is a high-end IC in the ALPU series.
ALPU-CV is a high-end IC in the ALPU series.
ALPU-P is a strong encryption chip, even under turbulent conditions such as static electricity.
GEN-FA has 32 Kbits of EEPROM. Configuration data and user data can be stored in the EEPROM.
KEROS-Lite CK02AX is a high-performance AES256 codec.
KEROS-Lite is a high-performance 64-byte OTP memory family with an advanced built-in AES 256 security engine and encryption functions.
TF-S166 is a dedicated output channel for 3-way RGB LED driver circuits. It also includes internal intelligent digital port data latching and signal shaping amplification driver circuits.
Special spectrum, using special phosphor formula, continuous spectrum meets RG0 test requirements, anti-blue light, anti-myopia LED lighting lamp beads.
MS1192 is an adapter chip compliant with the HBS bus specification (Japan Electronics Industry Association), with transmit and receive data functions. It uses AMI encoding in the transceiver unit, can interconnect via twisted pair, and signal transmission uses differential mode.
The MS90C104 chip can convert 5 channels of low-voltage differential signaling (LVDS) into 35-bit TTL data.
The MS90C365 chip can convert 18-bit TTL data into 3 channels of low-voltage differential signaling (LVDS).
The MS90C366 chip can convert 3 channels of low-voltage differential signaling (LVDS) into 21-bit TTL data.
The MS90C385B chip can convert 28-bit TTL data into 4 channels of low-voltage differential signaling (LVDS).
The MS90C385G chip can convert 28-bit TTL data into 4 channels of low-voltage differential signaling (LVDS).
The MS90C386 chip can convert 4 channels of low-voltage differential signaling (LVDS) into 28-bit TTL data.
MS2652D is a low-power, high-data-rate two-channel CMOS differential LVDS signal bus driver chip, supporting data reception rates exceeding 155.5 Mbps (77.7 MHz).
MS90C032/MS90C032T is a low-power, high-data-rate four-channel CMOS differential LVDS signal receiver chip.
MS90C031 is a low-power, high-data-rate four-channel CMOS differential LVDS signal bus driver chip, supporting data reception rates exceeding 155.5 Mbps (77.7 MHz).
