Sensors and Transmitters

Japan FIGARO Combustible Gas Pre-calibrated Module - CGM6812-B00

CGM6812-B00 is a new module equipped with Figaro's catalytic combustion type sensor TGS6812. It can detect methane, LP gas, and hydrogen, suitable for hydrogen leak alarms in hydrogen fuel cells and household natural gas alarms.

Japan Figaro FIGARO Methane Gas Pre-calibrated Module - FSM-T-01

FSM-T-01 is a pre-calibrated module for methane gas alarms. This module uses the TGS2611 sensor with an optimized classic circuit to measure methane gas concentration, pre-calibrated with Figaro's high-precision calibration equipment, and produced with mature aging processes. This module is designed to maximize savings in development and production costs for users, making it easier and simpler to manufacture civil natural gas alarms.

Japan figaro Alcohol Sensor - TGS2620

Japan figaro alcohol sensor TGS2620 has high sensitivity to organic solvents and alcohol. Its small size makes it very suitable for alcohol detectors.

Japan figaro Air Quality Sensor (Formaldehyde Sensor) - TGS2602

Japan figaro air quality sensor (formaldehyde sensor) TGS2602 detects gases such as ammonia and hydrogen sulfide produced by waste in office and home environments. This sensor also has high sensitivity to volatile organic compounds (VOCs) such as toluene from wood finishing and building materials.

Japan FIGARO Dissolved Oxygen Sensor - KDS-25B

Japan FIGARO Yuasa dissolved oxygen sensor KDS-25B is a unique primary battery type sensor specially developed for water quality control. The most notable features of this dissolved oxygen sensor are its long service life and immunity to CO2. KDS-25B is one of the ideal sensors for environmental monitoring and water quality testing.

Japan figaro Combustible Gas Sensor / LPG Sensor - TGS2610

Combustible gas sensor / LPG sensor TGS2610 has high sensitivity to propane and butane, making it an excellent LPG monitor. Due to its low sensitivity to volatile alcohol (a common interfering gas in residential environments), it is very suitable for gas leak alarms.

Japan figaro Combustible Gas Sensor / Natural Gas Sensor - TGS2611

Combustible gas sensor / natural gas sensor TGS2611 has high sensitivity to methane gas. Due to its low sensitivity to volatile alcohol (a common interfering gas in residential environments), it is an ideal sensor for household gas leak alarms.

ISweek Gas Flow Sensor - AFE-01

Gas flow sensor AFE-01 consists of four platinum thin-film resistors, with low impedance and a small heating area.

Korea Samyoung Temperature and Humidity Sensor Module - HTW-211

Temperature and humidity sensor module HTW-211 is a high-precision, reliable humidity measurement sensor module based on HumiChip®.

UK GSS Low Power Small Size Micro Infrared CO2 Sensor (NDIR CO2 Sensor) - MINIR/ExplorIR-M

Infrared CO2 sensor / CO2 sensor MINIR/ExplorIR-M is a low power (3.5mW) and high performance CO2 sensor, sized in the 4-series, ideal for battery-powered products and portable devices; range 0~100%, suitable for industrial, medical, and vegetable storage applications.

UK alphasense PID Photoionization Gas Sensor / TVOC Detection Sensor (Small Range) - PID-AH

Photoionization gas sensor / TVOC detection sensor PID-AH can detect 1ppb of VOC gases and can detect over 2000 different VOC gases. Many hazardous material raw materials contain VOCs. Due to its high sensitivity to VOCs, PID is an indispensable practical tool for early hazard alarms and leak monitoring of hazardous substances. It is very suitable for environmental air quality monitoring systems and instruments.

UK alphasense Oxygen Sensor (O2 Sensor) - O2-M2

Oxygen sensor (O2 sensor) O2-M2 is an electrochemical oxygen sensor, commonly known as an oxygen battery, 4-series size, 2-year service life, used in oxygen alarms and oxygen analyzers, widely applied in coal mines, steel, petrochemical, medical, and tunnel industries.

UK GSS High Speed Response Infrared CO2 Sensor (NDIR CO2 Sensor) - SprintIR-WF

SprintIR is a high-speed response infrared CO2 sensor (20Hz). The infrared CO2 sensor SprintIR is suitable for capturing rapid changes in CO2 concentration, such as in metabolic assessment and ventilators.

UK Alphasense Hydrogen Sensor - H2-AF

Hydrogen sensor H2-AF is typically used in hydrogen gas transmitters and various hydrogen detection applications.

UK Alphasense Carbon Monoxide Sensor (CO Sensor) - CO-A4

CO-A4 is a high-resolution carbon monoxide sensor, 4-series size, with high resolution, very suitable for environmental air quality monitoring systems and instruments.

UK Alphasense VOC PID Photoionization Gas Sensor - PID-AY5

Photoionization detector PID-AY5 can measure VOCs (volatile organic compounds) and some toxic gases in the range of (1ppb-20ppm), fully compatible and replaceable with the US Baseline photoionization gas sensor PID-20 (045-013).

UK Alphasense PID Photoionization Gas Sensor (Medium Range) - PID-AR5

Photoionization detector PID-AR5 can measure VOCs (volatile organic compounds) and some toxic gases in the range of (10ppb-200ppm), fully compatible and replaceable with the US Baseline photoionization gas sensor PID-200 (045-012).

UK alphasense Long Life Oxygen Sensor (O2 Sensor) - O2-A3

O2-A3 is a long-life electrochemical oxygen sensor, commonly known as an oxygen battery, 4-series size, 4-year service life, used in oxygen alarms, applied in coal mines, tunnels, and other fields.

Japan figaro Catalytic Combustion Type Combustible Gas Sensor - TGS6812

Japan figaro TGS6812 is a catalytic combustion type combustible gas sensor that can detect 100% LEL hydrogen. It features high precision, good stability, fast response, and linear output. It can not only monitor hydrogen but also detect methane and LP gas.

UK Alphasense High Resolution 4-Electrode Nitrogen Dioxide Sensor (NO2 Sensor) 4-Electrode - NO2-B43F NO2-B43F+

The NO2-B43F sensor is a PPB sensor designed for environmental air quality applications, with excellent baseline stability.

UK alphasense High Resolution Carbon Monoxide Sensor (CO Sensor) 4-Electrode - CO-B4 CO-B4+

CO-B4 is a high-resolution carbon monoxide sensor that can detect 4ppb of CO gas, with good stability, very suitable for environmental air quality monitoring systems and instruments.

UK SST Oxygen Transmitter Sensor - OXY-LC-485

The circuit can power and control the SST series dynamic oxygen sensors. The SST series oxygen transmitters do not directly measure oxygen concentration, but rather measure the partial pressure of oxygen in the gas. To directly output oxygen concentration, the oxygen transmitter IXY-LC-485 must be calibrated in air or in a gas with a known specific reference concentration. Applications: combustion control including oil, gas, and biomass boilers; composting; laboratory and building air quality monitoring; personal safety in enclosed spaces, etc.

Switzerland Neroxis Thermal Conductivity Gas Sensor - MTCS2601

MTCS2601 thermal conductivity gas sensor is a micromechanical thermal conductivity sensor consisting of 4 Ni-Pt resistors based on MEMS technology.

Japan figaro Civil Electrochemical Carbon Monoxide Sensor - TGS5042

Japan figaro electrochemical carbon monoxide sensor TGS5042 uses environmentally friendly electrolyte; no risk of electrolyte leakage; accuracy up to 1%, wide operating temperature, strong anti-interference ability, and calibration-free. Suitable for HVAC, fire alarms, and CO monitors.

Canada FISO Intracranial Pressure, Lung Pressure, Arterial Blood Pressure Fiber Optic Pressure Sensor - FOP-M260

FOP-M260 fiber optic pressure sensor is specially designed for small size and high precision in the medical field. It is completely immune to electromagnetic interference and is intrinsically safe for the human body.

Korea GENICOM Visible Light Sensor UV Sensor - GVBL-S12SD

Visible light sensor UV sensor GVBL-S12SD has a chip smaller than 0.4mm, SMD3528 package, InGaN material, PN-type photodiode, photovoltaic mode operation with high response and low dark current. Application fields: UV LED monitoring (385, 405nm, etc.), blue LED monitoring, UVA band UV lamp monitoring, UV curing.

UK alphasense PID Gas Sensor / TVOC Sensor (Large Range) - PID-A1

PID gas sensor / TVOC sensor PID-A1 is a large range PID sensor, dedicated to VOC detection, capable of detecting 6000ppm of VOC gases, 4-series size, very suitable for industrial applications such as chemical and petroleum.

UK Alphasense High Resolution Ozone Sensor (O3 Sensor) 4-Electrode - OX-B431 OX-B431+

OX-B431 is a high-resolution ozone sensor with a range of 0~20ppm, capable of detecting ozone concentrations as low as 15ppb, very suitable for environmental air quality monitoring systems and instruments. The UK Alphasense high-resolution ozone sensor (O3 sensor) OX-B431 can simultaneously detect O3 and NO2 (O3+NO2), but the NO2-B43F can only measure NO2 while filtering out O3. When using both sensors simultaneously, with calibrated

UK alphasense High Resolution Sulfur Dioxide Sensor (SO2 Sensor) 4-Electrode - SO2-B4 SO2-B4+

UK alphasense SO2-B4 is a high-resolution sulfur dioxide sensor that can detect 5ppb of SO2 gas, very suitable for environmental air quality monitoring systems and instruments.

Austria SENSORE Limiting Current Type Zirconia Oxygen Sensor - SO-D2-250-A300C

Limiting current type zirconia oxygen sensor SO-D2-250-A300C can measure oxygen concentrations from 0.1 to 25%, with high accuracy, low cross-sensitivity, and long service life. In most cases, only a single-point calibration is required. It is packaged in a threaded aluminum housing with a metal sintered filter, with a 3-meter cable, and is mostly used in automatic baking ovens.

Austria SENSORE Zirconia Oxygen Sensor for Oxygen Concentrators, Glove Boxes, 3D Printing, Air Separation Equipment - SO-E2-960

SO-E2-960 is a limiting current type zirconia oxygen sensor with a range of 1%~96%, high accuracy, low cross-sensitivity, and in most cases only requires a single-point calibration. It is packaged in TO8 and widely used in medical oxygen concentrators.

Austria SENSORE Limiting Current Type Zirconia Oxygen Sensor for Oxygen Concentrators, Glove Boxes, 3D Printing, Air Separation Equipment - SO-E2-250

Zirconia oxygen sensor SO-E2-250 can measure oxygen concentrations from 0.1 to 25%, with high accuracy, low cross-sensitivity, and in most cases only requires a single-point calibration. It is packaged in TO8 and widely used in household oxygen concentrators.

UK SST Threaded High Temperature Zirconia Oxygen Sensor (O2 Sensor) for 3D Printing - O2S-FR-T2-18C/B/A

O2S-FR-T2-18C/B/A is a high-temperature zirconia oxygen sensor with a range of 0.1~100% VOL, capable of operating in environments up to 400°C, very suitable for applications such as 3D printing, composting, boiler combustion control, and bacterial incubators.