Instruments & Meters

US Fieldpiece Mini Clamp Multimeter - SC240

The mini clamp multimeter SC240 adds temperature measurement and capacitance measurement; its functions exceed many larger multimeters. It also includes many other HVAC/R measurement functions; this multimeter is designed to make your work simpler, safer, and faster.

US Fieldpiece Mini Clamp Meter - SC220

The mini clamp meter SC220 is only 8 inches long, integrating multiple detection functions, microamp DC measurement, built-in non-contact voltage measurement, continuity measurement with buzzer, etc.; it is affordable and an excellent choice for HVAC/R testing tools.

US Fieldpiece Stick Digital Multimeter (HVAC/R Testing Meter) - HS33

HS33 is a great entry-level multimeter that well meets the testing needs of HVAC/R technicians. Its ergonomic design ensures comfortable operation.

Contact Microphone Stethoscope - CM-01B

The CM-01B contact microphone stethoscope consists of a highly sensitive, stable PVDF piezoelectric film combined with a low-noise preamplifier circuit, providing buffered output for special sound or vibration signal pickup. In product design, external noise interference is minimized, so when the rubber pad in the middle receives vibration signals, a high-sensitivity signal is output. The CM-01B contact microphone stethoscope is used for monitoring body sounds.

Two-Channel Gas Controller - MP202

The two-channel gas controller MP202 is a 2-channel, waterproof housing, wall-mounted controller that can use 1 or 2 sensor channels; it can provide 3 types of sensors (fixed, electrochemical, and catalytic) to monitor over 150 toxic or combustible gases; the front panel has buttons for convenient operation without opening the housing.

Four-Channel Gas Controller - MP204

MP204 is a 4-channel, waterproof housing, wall-mounted controller that can use up to 4 sensor channels; it can provide 3 types of sensors (fixed, electrochemical, and catalytic) to monitor over 150 toxic or combustible gases.

Bench-Mounted 24-Channel Gas Controller - MP24

MP24 is a bench or console combination, a compact control system that can be used for 1 or 2 sensing channels, or 12 controllers (24 channels), equivalent to 12 MP202s assembled in a 49cm combination rack; it can provide 3 types of sensors (fixed, electrochemical, and catalytic) to monitor over 150 toxic or combustible gases.

Explosion-Proof 2-Channel Gas Controller - MP220EX

The explosion-proof 2-channel gas controller MP220EX is a 2-channel, explosion-proof, wall-mounted controller certified for use in Class 1, Div 1, Groups C and D (optional B) hazardous areas. It can be operated with a magnetic wand without opening the cover or treating the hazardous area. It can provide 3 types of sensors (fixed, electrochemical, and catalytic) to monitor over 150 toxic or combustible gases.

Gas Mass Flow Controller - SFC5000 Series

The SFC5000 series enables extremely precise and repeatable control over a wide dynamic measurement range. The excellent performance of the gas mass flow controller is based on CMOSens® technology, which integrates a high-precision sensor element and analog/digital signal processing circuitry on a single CMOS silicon chip. The SFC5000 series gas mass flow controllers are ideal solutions for various applications in the industrial and medical markets.

Single-Channel Gas Monitor - LC100

The single-channel gas monitor LC-100 is a fixed, single-channel, wall-mounted controller that can monitor over 150 toxic and combustible gases. LC-100 is used with many sensors including solid-state, electrochemical, catalytic, infrared, etc. A solid-state sensor may include NEMA; any sensor can be used with IST's sensing transmitters (SM95) or smart sensors (4-20IQ). Weatherproof and rainproof packaging.

Gas Mass Flow Controller - SFC3000

The SFC3000 gas mass flow controller provides fast, precise gas flow control over a very wide range. The high accuracy and fast stabilization time of this product are mainly due to CMOSens® technology. The digitally calibrated and temperature-compensated sensor signal is directly converted into a digital signal to control the valve.

Gas Mass Flow Controller - SFC4000

The SFC4000 gas flow controller provides fast, precise flow control over a very wide range. Based on CMOSens® technology, the digitally calibrated and temperature-compensated sensor signal is directly converted into an analog signal to control the valve. Due to this principle, this mass flow controller is immune to electromagnetic interference.

Mac3 SpA Level Switch - MAC3

The Mac3 SpA level switch features a specially designed double-layer protective sealing structure to ensure reliability under any conditions and long-term use.

Stainless Steel Pressure Gauge - 60SS

The stainless steel pressure gauge 60SS consists of a pressure guide system, gear transmission mechanism, display device, and housing; it uses direct-contact connection and pressure-sensing element materials, with a fully sealed structure, providing strong resistance to corrosion from the measured medium and environmental corrosion, effectively protecting internal components from environmental impact and dirt intrusion.

Stainless Steel Pressure Gauge - 40SS

The stainless steel pressure gauge 40SS consists of a pressure guide system, gear transmission mechanism, display device, and housing; it uses direct-contact connection and pressure-sensing element materials, with a fully sealed structure, providing strong resistance to corrosion from the measured medium and environmental corrosion, effectively protecting internal components from environmental impact and dirt intrusion.

Stainless Steel Pressure Gauge - 25SS

The stainless steel pressure gauge 25SS consists of a pressure guide system, gear transmission mechanism, display device, and housing; it uses direct-contact connection and pressure-sensing element materials, with a fully sealed structure, providing strong resistance to corrosion from the measured medium and environmental corrosion, effectively protecting internal components from environmental impact and dirt intrusion.

Stainless Steel Pressure Gauge - 25CS

The stainless steel pressure gauge 25CS consists of a pressure guide system, gear transmission mechanism, display device, and housing; it uses direct-contact connection and pressure-sensing element materials, with a fully sealed structure, providing strong resistance to corrosion from the measured medium and environmental corrosion, effectively protecting internal components from environmental impact and dirt intrusion.

US NovaLynx Dial Barometer - 230-P111

The 230-P111 dial barometer is rated at mid-range ±0.1cm (approximately ±1.5 mbar). The 6" painted brass housing contains a precision rack-and-pinion temperature-compensated movement, and the knife-edge of the main pointer minimizes parallax error when reading. Not recommended for use at altitudes above 1067 meters.

US NovaLynx Handheld Digital Barometer - 230-M202

The 230-M202 handheld barometer-altimeter combines precise pressure sensing with microprocessor-based computing capability to provide instantaneous pressure and altitude readings. Its small size, digital display, versatility, and high accuracy make it ideal for field testing or as a portable pressure reference.

US NovaLynx Analog Barometer - 230-PTB110 Series

The PTB110 is suitable for various applications such as environmental pressure monitoring, data buoys, laser interferometers, and agriculture and hydrology. Its compact design is especially suitable for low-power data loggers. The external switch control is very practical when power supply is limited.

German Kirchgaesser Pressure Measuring Instrument - PEMEX-E

The PEMEX-E pressure measuring instrument is robust, durable, safe, and worry-free. It is a general mining pressure measuring instrument used to measure absolute and relative pressure in liquid and gas media.

German Kirchgaesser Mining Pressure Measuring Instrument - PEMEX-LC

The PEMEX-LC mining pressure measuring instrument is robust, durable, safe, and a general mining pressure measuring instrument. It is used to measure absolute and relative pressure in liquid and gas media.

German Kirchgaesser Pressure Measuring Instrument - PEM-EX-C

The PEM-EX-C pressure measuring instrument is robust, durable, safe, and a general mining pressure sensor. The device is connected to Kirchgaesser evaluation and/or display units or signal converters to measure relative and absolute pressure in liquid and gas media.

Electronic Pressure Gauge - EM200

The electronic pressure gauge EM200 is compact, easy to use, and a two-channel input electronic pressure gauge; it can measure simultaneously with two inputs.

German FALCOM Vehicle Tracking Device - STEPPIII-UX

The STEPPIII-UX is a freely configurable smart tracking device that can fully adapt to user needs. It primarily serves as a mobile client for various system solutions such as AVL, fleet management, vehicle security, and recovery. The device can work completely independently or with sensors and actuators. It can adapt to existing tracking solutions and be easily configured to collect or exchange relevant information for servers or users.

German FALCOM Vehicle Tracking Device - DISCO-B4

The DISCO-B4 is a freely configurable smart tracking device that can fully adapt to user needs. It primarily serves as a mobile client for various system solutions such as AVL, fleet management, vehicle security, and recovery. The device can work completely independently or with sensors and actuators. It can adapt to existing tracking solutions and be easily configured to collect or exchange relevant information directly for servers or users.

German FALCOM AVL Docking Device - JAZZ-2

FALCOM expands its AVL product line by adding the new JAZZ-2 device to its fleet management portfolio for navigation and communication, serving as a graphical user interface. Docking JAZZ-2 to an AVL device supports two-way communication between driver and dispatcher, including text and alarm messages. Sending new destinations or route information directly from headquarters to several vehicles via GPRS will save time and costs for both parties. This system enhances handling and AVL devices.

German FALCOM Personal Tracker & Mobile Phone - MAMBO2-B6

The MAMBO2-B6 is an advanced personal tracker that integrates a quad-band GSM/GPRS phone for dual-mode communication and a 50-channel low-power GPS receiver for positioning. At first glance, the MAMBO2-B6 looks like an ordinary mobile phone. This product includes multiple functions specifically designed for logistics providers, taxi companies, security and fire services, police, and emergency technical services. This powerful small device can be carried in a pocket or fixed.

German FALCOM Mobile Time Registration System - MTR-1-RF

The MRT-1-RF expands the successful application range of AVL-based devices in the field of time registration systems. With this device, employees' daily arrival and departure times can be recorded and tracked at any time and any place, and with the help of an optional GPS receiver, the installation location can also be determined. This efficient compact time registration system is easy and quick to install and is a perfect solution for any type of organization. Employees hold their RFID cards near the device to register entry and exit times.

German FALCOM Location Tracking System - DISCO-B4-GLONASS

The DISCO-B4-GLONASS is a new tracking system that combines GPS and GLONASS positioning systems, providing more reliable support for complete telematics. It is a freely configurable smart tracking device that can fully adapt to different user needs. With its quad-band GSM/GPRS technology supporting two-way communication, its ability to work with navigation satellite systems (GNSS) - GPS and GLONASS, and its high-capacity backup battery, it is widely applicable.

Advanced Smart Tracking Device, Tracker - DISCO-B5-MAGNET

The DISCO-B5-MAGNET is a freely configurable smart tracking device that can fully adapt to different user needs. With its quad-band GSM/GPRS technology supporting two-way communication, new GPS positioning technology, high-capacity backup rechargeable lithium battery, and waterproof and windproof plastic housing, this device is widely suitable for various outdoor applications such as asset tracking, vehicle security and recovery, and the transportation industry.

German FALCOM Advanced Vehicle Tracking System - BOLERO-LT2

The BOLERO-LT2 consists of a quad-band GSM/GPRS engine (GSM 850/900/1800/1900 MHz), a 50-channel high-sensitivity GPS core based on µ-blox engine, and a versatile embedded configuration software for location-based applications. The new device can be easily integrated into many new applications, from real-time navigation and positioning to remote tracking and monitoring. This product is suitable for indoor applications, ideally fixed.

Gas Mass Flow Meter - SFM3000

The SFM3000 is a digital flow meter especially suitable for high-volume applications. This flow channel design enables extremely low pressure drop through the sensor assembly, making it ideal for medical ventilation and respiratory applications.

Siargo Flow Meter - MF5000

The MF5000 series Siargo flow meter is an intelligent all-electronic gas mass flow meter with high-level technical performance, featuring high sensitivity, high accuracy, and a large range ratio; designed for industrial environments, it incorporates electromagnetic compatibility design with multiple anti-interference measures; it also has multiple signal outputs and can achieve network management functions through communication interfaces; this product can be widely used in petroleum, gas, chemical, smelting, energy, and other fields.

US Siargo MF5600 Series Mass Flow Meter - MF5600

The MF5600 mass flow meter is specifically designed for applications requiring separation of the display and the meter body, such as hospital oxygen supply systems and small air separation systems. The standard industrial user interface (RS485/4~20mA) and user-defined alarm functions enable remote or network monitoring. Current products are MF5612 and MF5619, which can measure 0-300 SLPM and 0-800 SLPM gas flow respectively.

MF - MF-GD

The MF-GD series medium and low pressure mass flow meters are specifically designed for measuring various medium and low pressure gases. This series uses battery power, reducing engineering costs. It is suitable for pipes with diameters of 32-80mm, can measure compressed air, nitrogen, oxygen, carbon dioxide, etc., with accuracy up to ±(1.5+0.5FS)%, and working pressure of 0.2 MPa.

MF/s Series Gas Mass Flow Meter - MF/s

The MF/s series gas mass flow meters are designed for the management and control of various industrial gases. This series provides intuitive mass flow information, and the user-friendly interface design (RS485/4~20mA) allows easy data processing. These products are suitable for pipes with diameters of 25-80mm, with accuracy of ±(2.0+0.5FS)%, and a range ratio of 50:1.

Siargo Inline Mass Flow Meter - MF

The Siargo MF series inline mass flow meters are designed for various management and control of industrial gases. This series provides intuitive mass flow information, and the user-friendly interface design (RS485/4~20mA/pulse, etc.) allows easy data processing. This product can be widely used in gas measurement and control in other industries, such as special gas monitoring in metallurgy, hydrogen flow monitoring in chemical industry, etc.

German Kirchgaesser Mining Magnetic Induction Flow Meter - MID-EX-E

The MID-EX-E mining magnetic induction flow meter is specially designed for measuring conductive fluid flow, such as water, emulsions, sludge, mud, and paste (measuring pressure optional).

German Kirchgaesser Magnetic Induction Flow Meter - MID-EX-C

The MID-EX-C flow sensor is specially designed for measuring conductive fluid flow, such as water, emulsions, sludge, mud, and paste. Flow measurement range: 0 - 10 l/min to 0 - 600 l/min.

German Kirchgaesser Electromagnetic Flow Meter - MID-EX-GC

The MID-EX-GC electromagnetic flow meter is specially designed for measuring conductive fluid flow, such as water, emulsions, sludge, mud, and paste. The housing is made of stainless steel.

German Kirchgaesser Electromagnetic Flow Meter - MID-EX-GL

The MID-EX-GL electromagnetic flow meter is specially designed for measuring conductive fluid flow, such as water, emulsions, sludge, mud, and paste. The housing is made of stainless steel and reinforced fiberglass polyester material (terminal housing is graphite).

German Kirchgaesser Electromagnetic Flow Meter - MIDEX

The MIDEX electromagnetic flow meter is robust, durable, safe, and worry-free. It is a general mining flow measurement device. Protection class IP65, compliant with EN 60529 standard.

Liquid Flow Meter - SLI-2000

The liquid flow meter SLI-2000 is a customized integrated flow control system: the new SLI is a high-precision solution for measuring water or hydrocarbons (alcohols, solvents, oils, gases, adhesives).

Liquid Flow Meter - SLI-0430

The liquid flow meter SLI-0430 is a customized integrated flow control system: the new SLI is a high-precision solution for measuring water or hydrocarbons (alcohols, solvents, oils, gases, adhesives).

UHPLC Liquid Flow Meter - SLG64-0075

The SLG64-0075 is ideal for monitoring dynamic liquid flow in cutting-edge UHPLC applications. The high-sensitivity CMOSens® microchip detects mass flow through a fused silica flow channel. This flow channel can withstand pressures up to 1000 bar/15000 psi. These properties make the high-end SLG64-0075 device particularly suitable for monitoring dynamic flow in cutting-edge chromatography systems.

US TSI Mass Flow Meter - 4140

The 4140 TSI mass flow meter can be used for various gas flow measurement applications. Measuring gas flow in laboratory or industrial production environments, the TSI general-purpose mass flow meter with multiple data output options (flow, volume, pressure, temperature) provides accurate results. The display version comes with accessories for quick and convenient complete setup and operation.

US TSI Mass Flow Meter - 4143

The 4143 TSI mass flow meter can be used for various gas flow measurement applications. Measuring gas flow in laboratory or industrial production environments, the TSI general-purpose mass flow meter with multiple data output options (flow, volume, pressure, temperature) provides accurate results. The display version comes with accessories for quick and convenient complete setup and operation.

US TSI Mass Flow Meter - 41433

The 41433 TSI mass flow meter can be used for various gas flow measurement applications. Measuring gas flow in laboratory or industrial production environments, the TSI general-purpose mass flow meter with multiple data output options (flow, volume, pressure, temperature) provides accurate results. The display version comes with accessories for quick and convenient complete setup and operation.

US TSI Mass Flow Meter - 4043

The 4043 TSI mass flow meter can be used for various gas flow measurement applications. Measuring gas flow in laboratory or industrial production environments, the TSI general-purpose mass flow meter with multiple data output options (flow, volume, pressure, temperature) provides accurate results. The display version comes with accessories for quick and convenient complete setup and operation.

US TSI Mass Flow Meter - TSI4040

The TSI4040 mass flow meter can be used for various gas flow measurement applications. Measuring gas flow in laboratory or industrial production environments, the TSI general-purpose mass flow meter with multiple data output options (flow, volume, pressure, temperature) provides accurate results. The display version comes with accessories for quick and convenient complete setup and operation.

US TSI Mass Flow Meter - 4045

The 4045 TSI mass flow meter can be used for various gas flow measurement applications. Measuring gas flow in laboratory or industrial production environments, the TSI general-purpose mass flow meter with multiple data output options (flow, volume, pressure, temperature) provides accurate results. The display version comes with accessories for quick and convenient complete setup and operation.

MF5200 Series Oxygen Mass Flow Meter - MF5200

The MF5200 series oxygen mass flow meter is specifically designed for oxygen metering in floors and departments in hospital central oxygen supply systems. This oxygen mass flow meter has a detachable display, RS485 network communication interface, and user-defined alarm functions for better network transmission and flow monitoring. MF5212 and MF5219 can measure 0-300 SLPM and 0-800 SLPM gas flow respectively.

Medical Gas Mass Flow Meter - SFM4100

Designed for anesthesia equipment, the CMOSens® SFM4100 gas mass flow meter can accurately measure air or other non-aggressive gases. This gas mass flow meter has a wide dynamic measurement range: 0-20 slm (standard liters per minute). Equipped with an I2C digital interface, it provides fully calibrated and temperature-compensated output signals and operates reliably at pressures up to 7 bar.

Liquid Flow Meter - SLI-1000

The liquid flow meter SLI-1000 is a customized integrated flow control system: the new SLI is a high-precision solution for measuring water or hydrocarbons (alcohols, solvents, oils, gases, adhesives).

Siargo Gas Mass Flow Meter - MF4000

The Siargo MF4000 gas mass flow meter is designed for measuring low-speed gas flow in gas pipelines with diameters of 3mm to 8mm. Threads and various quick connectors allow easy mechanical interface conversion to meet various gas pipeline requirements. This product can be used in process control, atmospheric sampling, and various industrial applications.

Siargo Insertion Mass Flow Meter - MFI

The Siargo MFI series insertion mass flow meters are equipped with self-sealing valves and are recommended for pipelines with diameters ≥150mm. All insertion mass flow meters have an accuracy of ±(1.5+0.5FS)% and can meet higher standards based on customer requirements. This product can also be used for gas measurement and control in production processes, such as monitoring and control of oxygen, nitrogen, helium, argon, compressed air, etc., and can be widely used in other fields.

Hydrocarbon Milliliter Flow Meter - SLQ-HC60

The new SLQ series flow meters have no moving parts, offering high reliability and chemical compatibility. The MEMS-based media-isolated sensor is specially designed for automation systems. These small, high-sensitivity flow meters enable precise and fast measurement of dynamic flow. Bubble detection is also possible. Suitable for media with flow rates below 100 ml/min. The high-sensitivity CMOSens® microchip can detect nanoliter-level flow through a glass straight channel.

US Siargo Digital Oxygen Inhaler Oxygen Flow Meter - MF5806 Series

The MF5806 series digital oxygen inhaler uses our self-developed MEMS flow sensing chip, suitable for medical central oxygen supply systems, emergency oxygen supply, and oxygen inhalation for hypoxia.

US Siargo MF5700 Series Portable Gas Mass Flow Meter - MF5706/MF5712

The MF5700 series gas mass flow meters are based on the MEMS flow sensing chip independently developed by Siargo Microsystems. The principle uses the dependence of heat and mass transfer of flowing gas, generating temperature changes upstream and downstream to obtain the gas mass flow.