Sensor Chip | Electronic Components & Chips | Chip

Magnetic Rotary Encoder Chip - AME200

AME200 is a magnetic encoder chip developed by Zhongke Alpha based on advanced AMR technology and a high-performance, dedicated ASIC signal processor.

Magnetoresistive Angle Sensor - AM100

AM100 is an angle sensor IC based on Anisotropic Magnetoresistance (AMR) technology.

Differential Liquid Level Module - LDM

The Differential Liquid Level Module LDM (Liquid-level -Differential-Mini) uses differential capacitive measurement principle, measuring changes in dielectric constant through a capacitive sensing chip. The module outputs capacitance values as digital signals, which are converted into liquid level height, etc.

Single-Ended Liquid Level Module - LSP

The Single-Ended Liquid Level Module LSP (Liquid-level -Single-ended-Pro) uses single-ended ground-referenced capacitive measurement principle, measuring changes in dielectric constant through a capacitive sensing chip. The module outputs capacitance values as digital signals, which are converted into liquid level height, etc.

Liquid Level Sensing Module - LLM

The Liquid Level Sensing Module LLM (Liquid-level Meter) measures changes in dielectric constant through a capacitive high-frequency circuit. The module outputs liquid capacitance values as digital signals.

Water Immersion Module - WS11

WS11 (Water Sensor-MC11S) is a capacitive, non-contact smart water immersion module.

Cascadable Multi-Point Inclinometer - RTS

The Cascadable Multi-Point Inclinometer RTS (Rock Tilt Sensor) can be networked in multiple points in series based on RS485 bus.

Conductivity, Liquid Level, and Temperature Composite Sensor - ECLT

The Conductivity, Liquid Level, and Temperature Composite Sensor ECLT (Electrical Conductivity, Level and Temperature sensor) is based on the high-frequency differential capacitive sensing SoC chip MCP61 combined with embedded algorithms.

Water Flow and Bubble Detector - MWFD

The Water Flow and Bubble Detector MWFD (Minyuan Water Flow Detector) uses a high-frequency capacitive detection chip to measure changes in the dielectric constant of the liquid inside the tube: different capacitance values indicate whether the tube contains air or liquid. When air is detected, a high level is output for alarm.

Wading Sensor - WWS

The Wading Sensor WWS (Wading Water Sensor) is a capacitive, non-contact smart sensor.

Water Immersion Sensor - WS61

WS61 (Water Sensor) is a capacitive, non-contact smart water immersion sensor.

Water Immersion Sensor - WLD

The Water Immersion Sensor WLD (Water Leak Detector) is a capacitive, non-contact smart water immersion sensor.

Deep Water Liquid Level Sensor Chip - DLM1

The Deep Water Liquid Level Sensor DLM1 (Deep Liquid-level Meter) is a liquid level sensor that senses continuous liquid level changes through capacitive high-frequency dielectric constant measurement.

Electronic Water Gauge Liquid Level Sensor - MER-MCP1081-260-26

The Electronic Water Gauge Liquid Level Sensor MER-MCP1081-260-26 is based on capacitive non-contact measurement principle, with the main sensing chip being the ten-channel multi-mode wideband digital capacitive processor chip MCP1081S.

Digital Capacitive Sensing Chip - MC11S

MC11S and MC11T are highly integrated dual-channel capacitive sensing chips.

Digital Capacitive Sensing Chip - MC12G

MC12G and MC12T are highly integrated dual-channel capacitive sensing chips.

Very High Frequency Digital Single-Ended Capacitive Processor Chip - MCP62/MCP62G

The MCP62 series (Mysentech Capacitive Processor) is a new generation of capacitive sensing microprocessor SoC chips launched by Mysentech.

High Frequency Digital Dual-Ended Mutual Capacitance Processor Chip - MCP61/MCP61S

The MCP61 series (Mysentech Capacitive Processor) is a new generation of capacitive sensing microprocessor SoC chips launched by Mysentech.

Digital Capacitive Sensing Chip - MC1081

The MC1081 series is a highly integrated, multi-channel, wideband digital capacitive sensing chip.

Digital Inductive-Capacitive Sensing Chip - MLC12G

MLC12G is a highly integrated dual-channel inductive-capacitive sensing chip.

Digital Capacitive Processor Chip - MCP1081S

MCP1081S (Mysentech Capacitive Processor) is a new generation of capacitive sensing microprocessor SoC chip launched by Mysentech.

Icing Sensor - MDC-ICE

The Icing Sensor - MDC-ICE is an icing sensor specifically designed for wind turbine blade icing. It can monitor blade icing status in real time through changes in the dielectric constants of ice, water, and air.

Capacitive Liquid Level Switch Sensing Module - LLS-MCP61

The Capacitive Liquid Level Switch Sensing Module - LLS-MCP61 (Liquid-level Switch-MCP61) measures changes in dielectric constant through a dedicated capacitive high-frequency sensing chip.

Capacitive Overflow Sensing Module - WK-MCP1081

The Capacitive Overflow Sensing Module - WK-MCP1081 (Water Kettle Boiling Sensor) uses the wideband capacitive detection chip MCP1081 to measure foam generated by liquid inside non-metallic containers.

Frost Electrode Plate - ICEFPC

The Frost Electrode Plate - ICEFPC is a smart sensor based on capacitive sensing, integrating the high-precision differential capacitive sensing chip MDC04 from Minyuan.

Capacitive Multi-Point Liquid Level Sensing Module - MER-MCP1081-50-30

The Capacitive Multi-Point Liquid Level Sensing Module (MER-MCP1081-50-30) is based on Minyuan's independently developed ten-channel multi-mode wideband digital capacitive processor chip MCP1081S.

Bluetooth Temperature and Vibration Module - MTV4.0

The Bluetooth Temperature and Vibration Module - MTV4.0 is based on wireless Bluetooth BLE 5.1 communication, using Minyuan's independently developed high-precision programmable digital temperature series chips (such as T117B).

Capacitive Liquid Level and Temperature Sensor - MOLT

The Capacitive Liquid Level and Temperature Sensor - MOLT (Minyuan Oil Level & Temperature) uses dedicated capacitive sensing chips MDC04 or MCP61.

Thermal Wind Speed Sensor - TWS

The Thermal Wind Speed Sensor - TWS (Thermal Wind Sensor) is a digital smart wind speed sensor.

Non-Contact Capacitive Liquid Level Switch Module - LLS-MCP1081-65-26

The Non-Contact Capacitive Liquid Level Switch Module - LLS-MCP1081-65-26 utilizes the high dielectric constant characteristic of water to construct capacitive electrodes that penetrate the water tank to measure liquid level changes.

Electronic Water Gauge Liquid Level Sensing Module - MER-MCP1081-60-45

The Electronic Water Gauge Liquid Level Sensing Module MER-MCP1081-60-45 is based on Minyuan's self-developed ten-channel multi-mode wideband digital capacitive processor chip MCP1081S.

Grain Moisture Content Sensor - GMS1081-C

The Grain Moisture Content Sensor GMS1081-C (Grain Moisture Sensor) is a capacitive high-frequency dielectric constant measurement, non-contact smart sensor.

Digital Capacitive Processor Chip - MCP1085S

MCP1085S is a new generation of capacitive sensing microprocessor SoC chip launched by Minyuan Sensing, integrating ten-channel, multi-mode, wideband capacitive analog front-end sensing circuits, microprocessor, storage, and rich I/O interfaces.

Digital Capacitive Sensing Chip - MC1081A

MC1081A is an automotive-grade, highly integrated, multi-channel, wideband digital capacitive sensing chip that meets the AEC-Q100 Grade 0 standard.

High-Precision Digital Capacitive Sensing Chip - MDC02

The capacitive sensing chips MDC04 and MDC02 are highly integrated digital-analog mixed-signal sensing integrated circuits. The chips are directly connected to the differential capacitive plates near the object under test, utilizing the differences in dielectric constants of different materials.

pH, Conductivity, and Temperature Composite Sensor - PHECT

PHECT is a multifunctional sensor that integrates pH value, electrical conductivity, and temperature sensing in one.

Nitrogen Oxide Conditioning Chip - MY9706

The nitrogen oxide sensor consists of a sensing probe and an electronic control acquisition unit. It can measure the concentration of nitrogen oxides (a mixture of nitrogen oxides such as NO and NO2) and nitrogen concentration in diesel exhaust.

Hall Sensor Chip - MS49E

MS49E is a linear Hall sensor whose output voltage is controlled by the applied power supply and varies linearly with the applied magnetic field.

Two-Wire Current-Type Hall Switch Sensor - AH546

AH546 is a Hall switch sensor designed based on BCDMOS technology.

Two-Wire Current-Type Hall Switch Sensor - AH545

AH545 is a Hall switch sensor designed based on BCDMOS technology.

Two-Wire Current-Type Hall Switch Sensor - AH544

AH544 is a Hall switch sensor designed based on BCDMOS technology.

Two-Wire Current-Type Hall Switch Sensor - AH543

AH543 is a Hall switch sensor designed based on BCDMOS technology.

Two-Wire Current-Type Hall Switch Sensor - AH542

AH542 is a Hall switch sensor designed based on BCDMOS technology.

Two-Wire Current-Type Hall Switch Sensor - AH541

AH541 is a Hall switch sensor designed based on BCDMOS technology.

High-Sensitivity Unipolar Hall Switch Sensor - AH512

AH512 is a high-sensitivity unipolar Hall switch chip designed based on BCDMOS technology.

High-Sensitivity Unipolar Hall Switch Sensor - AH511

AH511 is a high-sensitivity unipolar Hall switch chip designed based on BCDMOS technology.

High-Sensitivity Unipolar Hall Switch Sensor - AH510

AH510 is a high-sensitivity unipolar Hall switch chip designed based on BCDMOS technology.

High-Sensitivity Unipolar Hall Switch Sensor - AH509

AH509 is a high-sensitivity unipolar Hall switch chip designed based on BCDMOS technology.

High-Sensitivity Unipolar Hall Switch Sensor - AH508

AH508 is a high-sensitivity unipolar Hall switch chip designed based on BCDMOS technology.

High-Sensitivity Unipolar Hall Switch Sensor - AH507

AH507 is a high-sensitivity unipolar Hall switch chip designed based on BCDMOS technology.

High-Sensitivity Unipolar Hall Switch Sensor - AH506

AH506 is a high-sensitivity unipolar Hall switch chip designed based on BCDMOS technology.

High-Sensitivity Bipolar Hall Switch Sensor - AH505

AH505 is a high-sensitivity bipolar Hall switch chip designed based on BCDMOS technology.

High-Sensitivity Bipolar Hall Switch Sensor - AH504

AH504 is a high-sensitivity bipolar Hall switch chip designed based on BCDMOS technology.

High-Sensitivity Unipolar Hall Switch Sensor - AH503

AH503 is a high-sensitivity unipolar Hall switch chip designed based on BCDMOS technology.

High-Sensitivity Bipolar Hall Switch Sensor - AH502

AH502 is a high-sensitivity bipolar Hall switch chip designed based on BCDMOS technology.

High-Sensitivity Bipolar Hall Switch Sensor - AH501

AH501 is a high-sensitivity bipolar Hall switch chip designed based on BCDMOS technology.

High-Voltage-Resistant Bipolar Latch Hall Chip - ZW402

ZW402 is a high-voltage-resistant bipolar Hall switch chip manufactured using a high-voltage bipolar process.

Omnipolar High-Voltage-Resistant Hall Switch Chip - AH452

AH452 is a high-voltage-resistant, high-sensitivity omnipolar Hall switch chip designed using bipolar semiconductor (Bipolar) process.

Omnipolar High-Voltage-Resistant Hall Switch Chip - AH451

AH451 is a high-voltage-resistant, high-sensitivity omnipolar Hall switch chip designed using bipolar semiconductor (Bipolar) process.

Current-Type Two-Wire Unipolar Hall Switch Chip - AH431

AH431 is a Hall effect sensor switch chip designed and manufactured based on bipolar semiconductor (Bipolar) process.