Sensor | PrimeIndu

Japanese NEMOTO ionization smoke sensor - NIS-02C

The NIS-02C is an ionization smoke sensor. Like other smoke sensors, it uses an extremely small amount of radioactive material 241Am internally. Its radiation level is below the basic standard of 10 KBq for radioactive materials set by the IAEA (International Atomic Energy Agency) through BSS, so it can be treated as a product without radioactive materials.

Ionization smoke sensor - NIS-09C

The NIS-09C is an ionization smoke sensor that uses a tiny amount of radioactive Americium-241 internally. However, the sensor itself is covered by a metal casing, ensuring that radiation never leaks, so users can use it with confidence. In clean air, the output balanced voltage consistency is excellent, and assembling detectors does not require individual measurement of the ionization chambers, facilitating automated production. This ionization chamber smoke sensor is a new type of sensor meticulously designed specifically for smoke detection.

Korean syhitech dew condensation sensor - SY-DS-1

The dew condensation sensor SY-DS-1 measures or predicts air condensation through its own resistance change. It has high sensitivity in high-humidity environments. The dew condensation sensor SY-DS-1 is suitable for occasions requiring control of high humidity and condensation. It has fast response speed. Typical applications include dew detection in video recorders and cameras, and condensation measurement in the power industry.

German GFS dew point sensor - NP330-G

Absolute dew point sensor, measures trace moisture in gas within the range of -80°C DP to +20°C DP

Stevens water pressure-type water level meter

Stevens water pressure-type water level gauge - SDX

Stevens SDX (pressure-type water level meter) is a pressure-type analog sensor that provides accurate measurement results and is relatively economical for most water level measurement users.

Stevens Water intelligent SDI - 51168

The Stevens Smart PT is a ceramic membrane pressure and temperature sensor that provides precise measurement results, suitable for various liquid level measurement applications.

German Knick SE 515 Memosens pH sensor - SE 515

The SE 515 Memosens pH sensor achieves high stability and long operating life through special design. The reference system is in direct contact with the measured medium through a frosted glass sleeve junction. The junction has almost no risk of contamination or blockage. Measurements can also be made at low temperatures due to special low-impedance glass.

German Knick SE 546 Memosens pH sensor - SE 546

The pH sensor SE 546 is a break-resistant ISFET pH sensor. Its excellent characteristics make it widely applicable: the body material is FDA-compliant PEEK, dual-chamber reference system, short response time, usable at low temperatures, certified biocompatibility, sterilizable, and autoclavable.

German Knick SE 554 Memosens pH sensor - SE 554

The pH sensor SE 554 is a low-maintenance sensor suitable for demanding processing applications in the chemical industry. Digital. High precision, high stability, high speed, and long operating life are achieved through special design. The reference system is in direct contact with the measured medium through two open junctions. The junction has almost no risk of contamination or blockage. The high and specially distributed potassium chloride content in the polymer reduces measurement disturbances that may be caused by liquid junction potentials.

German Knick SE 555 Memosens pH sensor - SE 555

The pH sensor SE 555 is a steam-sterilizable sensor that provides high reliability and precision. Its digital design and special pH glass ensure particularly fast and stable response, making the sensor compatible with CIP and SIP even in the harshest environments. The gel electrolyte of the reference electrode is pressurized, ensuring long-term stability. This makes the sensor especially suitable for routine applications in food processing and biotechnology. It is also well-suited for continuous measurement tasks in analytical chemistry.

German Knick SE 558 Memosens pH sensor - SE 558

The pH sensor SE 558 is suitable for simple measurements in ultrapure water, water, and analytical chemistry. Low-maintenance pH sensor with gel reference electrolyte. The SE 558 sensor has an integrated temperature detector, which automatically provides temperature compensation for the pH signal during calibration and operation. The SE 558 sensor is particularly suitable for media with extremely low conductivity. It provides 3 ceramic junctions and a KCl container.

German Knick SE 557 Memosens pH sensor - SE 557

The pH sensor - SE 557 is for special requirements, high-precision measurement, using refillable liquid electrolyte. Digital, eliminates typical junction problems, achieving high-precision measurement in ultrapure water or heavily contaminated media and at high temperatures. Integrated refillable liquid electrolyte container. Ceramic junction; self-cleaning due to pressurization (continuous electrolyte outflow). Silver ion trap prevents junction scaling and contamination.

German Knick SE 560 Memosens pH sensor - SE 560

The SE 560 Memosens pH sensor is suitable for low conductivity and/or low temperature media, with refillable liquid electrolyte. The high electrolyte outflow gives the junction a self-cleaning function, enabling precise measurement; it is also suitable for media with extremely low conductivity. Measurements at low temperatures are achieved through special low-impedance glass.

German Knick SE 603 Conductivity sensor - SE 603

The SE 603 conductivity sensor is a 4-electrode sensor with a very wide measurement range and very high corrosion resistance, capable of withstanding high pressure and high temperature. Sensor materials: PTFE and platinum.

German Knick SE 615 2-electrode sensor - SE 615

The SE 615 2-electrode sensor is an affordable sensor suitable for water and wastewater treatment applications. The electrodes are made of low-polarization special graphite and have a wide measurement range. Designed for MemoRail applications.

German Knick SE 605 (H) conductivity sensor - SE 605 (H)

The SE 605 (H) conductivity sensor is a rugged 2-electrode sensor suitable for precise and reliable measurement of extremely low conductivity in hygienic applications, and is also suitable for ultrapure water.

German Knick SE 620 electrode sensor - SE 620

The SE 620 electrode sensor is a hygienic design 2-electrode sensor that meets pharmaceutical standards, used for conductivity sensors in pharmaceutical design, featuring coaxial electrodes and an integrated temperature detector. Low surface roughness (

German Knick ring conductivity sensor - SE 680

The SE 680 ring conductivity sensor is a high-precision sensor made of FDA-approved PEEK material, providing an extremely wide measurement range. It is steam sterilizable.

German Knick SE 670 digital ring sensor - SE 670

The SE 670 ring sensor is a cost-effective digital sensor for measuring low to very high conductivity. It is insensitive to contamination and corrosion. A universal conductivity sensor suitable for medium chemical stress with a wide measuring range. Integrated ultra-fast temperature detector.

American ECD smart sensors measure pH, ORP, dissolved oxygen, and turbidity

American ECD smart sensor measuring pH, ORP, dissolved oxygen, turbidity - S80

The electrochemical device provides a complete liquid analysis sensor: pH, ORP, specific ions, dissolved oxygen, conductivity, and resistivity. The technical advantage of the Model S80 smart sensor is its design flexibility to configure the sensor that best suits your application.

American ECD pH sensor - T80

The T80 pH sensor measures pH, ORP, specific ions, dissolved oxygen, turbidity, conductivity, or resistivity, and performs modal S80 on the sensor. The T80 universal transmitter is a single or dual-channel transmitter used for continuous measurement of pH, ORP, specific ions, dissolved oxygen, turbidity, conductivity, or resistivity in general industrial environments.

Conductivity sensor - DDM-200

The DDM-type industrial conductivity transmitter is a process instrument that indirectly measures ion concentration by measuring the conductivity value of a solution. It can continuously detect the conductivity of aqueous solutions in industrial processes online.

German Knick SE 600 conductivity sensor - SE 600

The SE 600 conductivity sensor is a 4-electrode sensor suitable for high-pressure and high-temperature applications; with a wide measurement range: from pure water to high-conductivity substances, suitable for special chemical applications at 210°C and 25 bar. Universal measurement range from pure water to 600 mS/cm. It has a fixed cable and integrated temperature detector. Process wetted materials: stainless steel and PTFE; extremely compact design.

German Knick SE 656 ring sensor - SE 656

SE 656 ring sensor is a special precision sensor with high chemical resistance and a very large measuring range. It is suitable for heavily polluted and strongly oxidizing media.

American sensorex ring conductivity sensor - TCS3000 and 3020 series

The SENSOREX TCS series ring inductive conductivity sensors are suitable for measuring highly corrosive and easily clogging solutions. They avoid the contamination and corrosion problems commonly encountered with general conductivity sensors, thus providing better stability and greatly reducing maintenance costs.

American pHionics Inc STS series conductivity sensor - 4102 conductivity

US pHionics Inc STS Series Conductivity Sensor 4102 measures conductivity, total dissolved solids (TDS), or salinity using a 4-electrode cell, scaled according to the data logger or telemetry instrument (RTU).

French PONSEL PTOD fluorescence sensor - PF-CAP-C-00140

OPT0D (optical dissolved oxygen measurement technology) is a design based on fluorescence optical technology.

American pHionics Inc STS series ORP oxidation-reduction potential sensor - 2001 ORP

US pHionics Inc STS Series ORP Oxidation-Reduction Potential Sensor 2001 ORP replaceable platinum sensing element, capable of detecting redox potential (ORP) from -1000 to +1000 mV

American pHionics Inc STS series dissolved oxygen sensor - 3020 dissolved oxygen

American pHionics Inc STS series dissolved oxygen sensor measures 0-20 mg/L or percentage saturation of dissolved oxygen with a galvanic electrode according to the scaling of the attached data logger or telemetry instrument (RTU).

American pHionics Inc STS series pH sensor - PH series

Groundwater monitoring, agricultural runoff, mining pollution, industrial wastewater monitoring, wastewater treatment

German AMT 7-electrode conductivity sensor - 7-electrode conductivity sensor

The German AMT 7-electrode conductivity sensor has been developed for interfacing with submersible probe systems, most importantly to avoid malfunctions caused by electric and magnetic effects.

Wireless wind speed/wind direction sensor - WSD202-EX

The WSD202 wireless wind speed/direction node is a new type of data acquisition system used for outdoor wind speed and direction measurement, commonly applied in industries such as water conservancy, hydrology, meteorology, and wind power.