Sensors | PrimeIndu

US Sensorex Water Quality Sensors (Laboratory ORP Electrodes) - SG500C-ORP, SG500CD-ORP

Laboratory ORP electrode (water quality sensor), measurement range: +/-2000mV or ORP range table, temperature/pressure: Max 176°F (80°C) / 50 psig (3.4bar).

US Sensorex Water Quality Sensors (Grounded pH Electrodes and ORP Electrodes) - DA650CD, DA650CD-ORP

The DA series pH and ORP electrodes are designed to solve operational problems when stray voltages and ground loops exist in the solution. Range: 0-14 pH (0-12 pH without Na+ interference); +/- 2000mV ORP.

US Sensorex Water Quality Dissolved Oxygen Sensors (Laboratory Dissolved Oxygen Electrodes) - DO1200/H, DO1200/T

The DO1200 and DO1200TC use reliable amperometric technology. No warm-up time required. The sensor comes with a fast-response HDPE membrane cap for portable or laboratory use. PTFE membrane caps are available for online or high UV radiation applications. Refill solution can be replaced when needed.

Ozone Sensor - OZE 3-mA-2ppm, OZE 2-4P

The OZE type ozone sensor is used for the determination of ozone in drinking water, swimming pool water, and process water of similar quality.

pH and Oxidation-Reduction (ORP) Combination Sensor - pH and ORP Combination Sensor

The combination sensor for measuring pH and oxidation-reduction potential consists of a measuring electrode (glass electrode for pH, platinum electrode for ORP) and a reference electrode (surrounding the measuring electrode).

PH ORP Sensor - DULCOTEST Series

PH ORP Sensor Transmitter

US Sensorex General Purpose Plastic and Glass pH and Reference Electrodes - SG200R / SG200RD Series

General purpose plastic and glass pH and reference electrodes, pH range: 0-14 (Na+ error >12.3 pH), fast response - 95% in less than 1 second (spherical only).

US Sensorex Sanitary Flange Conductivity Sensors - CS615/CS620

These sensors are specially designed with 1", 1.5", and 2" tri-clamp flange connections for installation, suitable for food (beverages, dairy, confectionery, etc.), pharmaceutical, and other applications. These sensors have passed CIP standards and steam sterilization during manufacturing.

US Sensorex Water Quality Sensors (Submersible or Inline ORP Electrodes) - S500C-ORP, S500CD-ORP

This series of electrodes mainly adopts an economical design suitable for multiple applications such as inline or submersible installation. The housing materials are made of durable epoxy or Ryton material. Mainly used in marine exploration, bioengineering, environmental protection, brewing, and other fields.

US Sensorex Water Quality pH Sensors (3-in-1 pH Electrodes) - S290C Series

The water quality pH sensor (3-in-1 pH electrode) S290C includes a pH measuring electrode, reference electrode, and temperature compensation probe (ATC). Its function is the same as three separate electrodes. It is an innovative electrode style that is easy to use and meets various instrument requirements.

Smart Storm Water Quality Sensor - NTU

The measurement principle is based on turbidimetry / 880 nm (ISO 7027). The sensor can be calibrated with formazin standard solutions.

Smart Storm Water Quality Sensor - C4E

This sensor operates with 4 electrodes: a constant voltage AC is established between a pair of graphite main electrodes.

UK Detectronic Water Quality Sensor - COD/TOC

The ORAKEL COD/TOC sensor waste analyzer features a modular design and can be integrated with other sensors such as pH, turbidity, and dissolved oxygen.

German Presens Non-Invasive pH Sensor - SP-HP5

The non-invasive pH sensor is optimized for physiological solutions and cell culture media.

Smart Storm Water Quality Sensor Optical Dissolved Oxygen Temperature - OPTOD

The OPTOD sensor is based on cold light optical technology and is supported by ASTM International Standard Method D888-05.

Endetec Water Quality Detection Sensor Safe Drinking Water - KAPTA™ 3000-AC4

The KAPTA™3000-AC4 detector has been specifically developed to improve the management and control of drinking water distribution networks. The KAPTA™3000-AC4 monitors important parameters of chlorinated water, conductivity, using innovative integrated technology for pressure and temperature.

US Sensorex Chlorine Dioxide Sensor - CLD502, CLD505, and CLD510

The CLD series (chlorine dioxide sensors) uses advanced amperometric measurement technology. Designed for water treatment disinfection applications, used with chlorine dioxide, pools, etc. These sensors have three ranges to choose from to detect chlorine dioxide concentration. The detection ranges for CLD502, CLD505, and CLD510 are 0-2ppm, 0-5ppm, and 0-10ppm respectively.

US Sensorex Free Chlorine Sensor - FCL502, FCL505, and FCL510

The FCL series (free chlorine sensors) uses advanced amperometric measurement technology. Designed for water treatment disinfection applications such as pools. These sensors have three ranges to choose from to measure free chlorine concentration. The detection ranges for FCL502, FCL505, and FCL510 are 0-2ppm, 0-5ppm, and 0-10ppm respectively.

US Sensorex Underwater Electrochemical Dissolved Oxygen Sensor - DO6400, DO7400

The DO6400 and 7400 series dissolved oxygen sensors contain a large-capacity electrolytic cell, easy-to-replace oxygen-permeable membranes, and use reliable galvanic cell measurement technology, supporting long-term operation. These dissolved oxygen sensors are ideal for aquaculture and wastewater monitoring applications, requiring minimal maintenance.

US Sensorex Water Quality Sensor (General Purpose pH Electrode) - S200C/S260/S270 Series

The general purpose pH electrode is an economical multi-purpose pH electrode that can adapt to inline or submersible installation. Multiple models are available (single junction or double junction, glass bulb measuring surface or flat surface measuring scale, etc.).

UK Detectronic Water Quality Sensor - MMs-d010

The ORAKEL series residual chlorine analyzers, controllers, and monitors are membrane devices that are insensitive to pH changes, do not use reagents, are extremely stable, and reduce maintenance and lifecycle costs.

Aqualabo pH Sensor Water Quality Sensor - DIGISENS Series

The PHEH sensor is designed to work under harsh conditions such as pure mountain water with low conductivity of 20µS/cm, lakes and rivers (100-2000 µS/cm), seawater with conductivity of 50 mS/cm, and wastewater with conductivity higher than 200 mS/cm.

US Sensorex Water Quality Sensor (Modular pH Sensor Platform) - S8000 Series

The modular pH sensor platform, S8000 series, is made of corrosion-resistant RYTON (PPS engineering plastic) for all materials, and all sealing materials are Viton (fluororubber), with strong corrosion resistance. Widely used in process technology and monitoring, papermaking, plastic chemical industry, calcination plants, water treatment, sewage, cooling water, and other industries.

Turbidity Sensor - AR-TS-300B

Turbidity is caused by suspended particles in water, which diffusely reflect incident light. Typically, scattered light at a 90-degree direction is used as the test signal.

German AMT Water Quality Sensor - pH Sensor

The German AMT water quality pH sensor combines with existing CTD detection systems and has developed a pH combined shallow water sensor with integrated electronics. The sensor consists of a pressure-balanced glass electrode and a reference electrode (Ag/AgCl) on a plastic rod.

German AMT Water Quality Sensor Ozone Sensor - O3 Sensor

The German AMT ozone sensor is based on the electrochemical amperometric principle and can quickly analyze dissolved ozone (O3) in water on-site. It is suitable for natural surface water, industrial waters, and oceans. O3 diffuses into the sensor through a gas-permeable membrane, first chemically reacts with the electrolyte solution to form electrochemically active compounds, which then diffuse to the working electrode. At the working electrode, the active compound is oxidized, generating a current signal corresponding to the partial pressure of dissolved O3 for quantitative analysis.

German AMT Water Quality Sensor Hydrogen Sulfide Sensor - H2S Sensor

The German AMT water quality H2S sensor is based on the electrochemical amperometric principle and can quickly analyze dissolved hydrogen sulfide (H2S)/sulfide in natural water on-site. H2S gas diffuses into the sensor through a gas-permeable membrane, then undergoes a redox reaction on the surface of the working electrode inside the sensor. Quantitative analysis is performed by recording the current signal related to the H2S content.

German AMT Water Quality Sensor Hydrogen Peroxide Sensor - H2O2 Sensor

The German AMT H2O2 sensor is based on the electrochemical amperometric principle and can quickly analyze dissolved hydrogen peroxide (H2O2) in water on-site. H2O2 diffuses into the sensor through a gas-permeable membrane, then undergoes an electrochemical reaction on the surface of the working electrode inside the sensor. Quantitative analysis is performed by recording the current signal corresponding to the partial pressure of dissolved H2O2.

US ECD Ammonia Nitrogen Sensor - HYDRA NH4+-N

The US ECD ammonia nitrogen sensor HYDRA NH4+-N uses a three-electrode system with a spray cleaner. Ammonium nitrogen (NH4+-N) is the primary measurement, and potassium ion and pH glass electrodes are used to compensate the NH4+ signal. The sensor is waterproof with an ingress protection rating of IP68.

Smart Storm Water Quality Sensor - PHEHT

The PHEHT sensor is designed for harsh environments, from pure spring water with conductivity as low as 20 µS/cm, lake and river water with conductivity (100-2000 µS/cm), seawater with conductivity of 50 mS/cm, to wastewater with conductivity higher than 200 mS/cm.

US Global Water pH Sensor Water Quality Sensor - WQ201B

The WQ201 pH sensor is a rugged and reliable device for water pH measurement. The pH transmitter is mounted on a 25-foot marine-grade cable and can be used at lengths up to 500 feet. The sensor output is 4-20 mA with a three-wire configuration. The WQ201 electronics are encapsulated in marine-grade epoxy inside a stainless steel housing. The unit also uses a removable shield and replaceable pH sensing element for easy maintenance.

US Global Water ORP Sensor Water Quality Sensor - WQ600B

The WQ600 (oxidation-reduction) ORP sensor is a rugged and reliable device for ORP/redox measurement. The sensor features a 25-foot marine-grade cable with lengths up to 500 feet available. The WQ600 output is 4-20 mA with a three-wire configuration. The unit's electronics are completely encapsulated in marine-grade epoxy inside a stainless steel housing.

US Global Water Turbidity Sensor Water Quality Sensor - WQ730B

The WQ730 turbidity sensor is a highly accurate submersible instrument for field environmental or process monitoring. Applications for the WQ730 include: water quality testing and management, river monitoring, stream measurement, reservoir water quality testing, groundwater testing, water and wastewater treatment, and industrial control.

US Global Water pH Electrode Water Quality Sensor - IoLine TrisB

The IoLine Tris compatible pH electrode uses a patented three-chamber system with an iodine/iodide reference reservoir. Standard hydrogen electrodes have been proven difficult to use in practice and are of theoretical importance only. Ag/AgCl reference systems, the most common reference systems, can cause measurement instability due to potential changes with temperature variations or reactions with silver ions in the measuring solution at the diaphragm. In contrast, IoLine pH electrodes have lower temperature sensitivity and gold...

Sper Scientific Water Quality Sensor - Data Logging Conductivity/TDS Meter

Sper Scientific water quality sensors record data in the factory or field for later computer storage and analysis, automatically recording up to 16,000 data points with time and date.

German Presens Single and Multi-Channel pH Meters - pH-mini and pH-micro Series

The pH-mini and pH-micro are precision fiber optic pH meters. These devices are used with non-contact or micro-invasive optical sensors.

Korean GENICOM Ultraviolet Detector - GUVx-T1xGC-LA5

Ultraviolet detector - GUVx-T1xGC-LA5, dimensions 36 x 30 x 16mm, air environment, single supply voltage, analog voltage output, used in UV lamp monitoring, UV curing, UV spectroscopy, UV air purification, UV lamp/LED monitoring, and other fields.

Korean GENICOM Ultraviolet Detector - GUVA-T11GC-2LA2

Ultraviolet detector - GUVA-T11GC-2LA2, dimensions 55 x 30 x 16mm, air environment, single supply voltage, analog voltage output, used in UV lamp monitoring, UV curing, UV spectroscopy, UV air purification, UV lamp/LED monitoring, and other fields.

Korean GENICOM Ultraviolet Detector - GUVC-T11GC-I4LW8.1

Ultraviolet detector GUVC-T11GC-I4LW8.1 - alloy material, mounting size: NPT1/2" / 12 mm, single supply voltage, 3-wire 4~20mA current output. Used in UV water disinfection; UV lamp/LED monitoring, and other fields.

Korean GENICOM Ultraviolet Detector - GUVC-T11GC-I8LW6

Ultraviolet detector - GUVC-T11GC-I8LW6 - mounting size: M36 x 1.5p/12 mm, complies with DVGW W294-3(2006) standard, single supply voltage, 3-wire 4~20mA current output, used in UV water disinfection; UV lamp/LED monitoring, and other fields.

Korean GENICOM Ultraviolet Detector - GUVV-T11GC-I8LW6

Ultraviolet detector - GUVV-T11GC-I8LW6 - mounting size: M36 x 1.5p/12 mm, single supply voltage, 3-wire 4~20mA current output, water environment (10 bar) used for total UV power measurement; UV water disinfection; UV lamp/LED monitoring, and other fields.

Korean GENICOM Ultraviolet Detector - GUVx-T1xGC-I8LW5.1

Ultraviolet detector - GUVx-T1xGC-I8LW5.1 - mounting size: PT1/4 "/12 mm, single supply voltage, 4~20mA current output, water environment (less than 10 bar) used for UV power measurement; UV lamp monitoring, and other fields.

Korean GENICOM Ultraviolet Detector - GUVx-T1xGC-3LW5.1

Ultraviolet detector - GUVx-T1xGC-3LW5.1, mounting size: PT1/4 "/12 mm, single supply voltage, 0~5V voltage output, water environment (less than 10 bar) used for UV power measurement, UV lamp monitoring, and other fields.

Korean GENICOM Ultraviolet Detector - GUVx-T1xGC-I8LW5

Ultraviolet detector - GUVx-T1xGC-I8LW5 - mounting size: PT1/4 "/12 mm, single supply voltage, 4~20mA current output, water environment (less than 10 bar) used for: UV power measurement; UV lamp monitoring, and other fields.

Korean GENICOM Ultraviolet Detector - GUVx-T1xGC-3LW5

Ultraviolet detector - GUVx-T1xGC-3LW5, mounting size: PT1/4 "/12 mm, single supply voltage, 0~5V voltage output, water environment (less than 10 bar) used for UV power measurement; UV lamp monitoring, and other fields.

Korean GENICOM Ultraviolet Detector - GUVC-T11GC-I8LO1.1

Ultraviolet detector - GUVC-T11GC-I8LO1.1, single supply voltage, analog voltage output, spectral detection range: 220~280nm, response time: 10ms, used for UV power measurement; UV lamp monitoring, and other fields.

Korean GENICOM Ultraviolet Detector - GUVC-T11GC-3LWLO1.1

Ultraviolet detector - GUVC-T11GC-3LWLO1.1, single supply voltage, analog voltage output, spectral detection range: 220~280nm, response time: 10ms, used for UV power measurement; UV lamp monitoring, and other fields.

Korean GENICOM Ultraviolet Detector - GVBL-T12GC-3LO1

Ultraviolet detector - GVBL-T12GC-3LO1 - single supply voltage, analog voltage output, high-temperature environment (below 200°C) used for UV power measurement; UV lamp monitoring, and other fields.

Korean GENICOM Ultraviolet Detector - GUVx-T1xGC-I8LO1

Ultraviolet detector - GUVx-T1xGC-I8LO1 - single supply voltage, 3-wire 4~20 mA current output, high-temperature environment (below 200°C) used for UV power measurement, UV lamp monitoring, and other fields.

Korean GENICOM Ultraviolet Detector - GUVx-T1xGC-3LO1

Ultraviolet detector - GUVx-T1xGC-3LO1 - single supply voltage, analog voltage output, high-temperature environment (below 200°C) used for UV power measurement, UV lamp monitoring, and other fields.

Korean GENICOM Ultraviolet Detector - GUVB-S11SC-I8H3

Ultraviolet detector - GUVB-S11SC-I8H3 - single supply voltage, 4-20mA current output, measures solar UV index, used for solar UV index monitoring and other fields.

Korean GENICOM Ultraviolet Detector - GUVB-S11SC-3LWH3

Ultraviolet detector - GUVB-S11SC-3LWH3, single supply voltage, analog voltage output, measures solar UV index, used for solar UV index monitoring and other fields.

Korean GENICOM Ultraviolet Detector - GUVA-S12SC-3LWH3

Ultraviolet detector - GUVA-S12SC-3LWH3 - single supply voltage, analog voltage output, measures solar UV power, used for solar UV power monitoring and other fields.

Korean GENICOM Ultraviolet Detector - GUVV-S10SC-3LWH3

Ultraviolet detector - GUVV-S10SC-3LWH3 - single supply voltage, analog voltage output, measures solar UV power, used for solar UV power monitoring and other fields.

Korean GENICOM Ultraviolet Detector - GUVx-T1xGC-LA6

Ultraviolet detector - GUVx-T1xGC-LA6, dimensions 36 x 30 x 19mm, air environment, single supply voltage, analog voltage output, adjustable detection range (variable resistor). Used in UV lamp/LED monitoring, UV power measurement, and other fields.

Korean GENICOM Ultraviolet Detector - GUVx-T1xGC-TLW10

Ultraviolet detector - GUVx-T1xGC-TLW10 - alloy material, mounting size: PT3/4 " /16 mm, single supply voltage, 0~5V voltage output. Used for UV power measurement, UV lamp monitoring, temperature monitoring, and other fields.

Korean GENICOM Ultraviolet Detector - GUVx-T1xGC-TLW5

Ultraviolet detector - GUVx-T1xGC-TLW5 - alloy material, mounting size: PT1/4 "/12 mm, single supply voltage, 0~5V voltage output, complies with DVGW W294-3(2006) standard. Used for UV power measurement; UV lamp monitoring, temperature monitoring, and other fields.

Korean GENICOM Ultraviolet Detector - GUVC-T11GC-DVGW

Ultraviolet detector - GUVC-T11GC-DVGW - alloy material, mounting size: 316-L (1.4404), single supply voltage, 2-wire 4~20mA current output, complies with DVGW W294-3(2006) standard. Used for pure UVC monitoring, germicidal lamp monitoring, and other fields.

Korean GENICOM Ultraviolet Detector - GUVC-T11GC-I7LW11

Ultraviolet detector - GUVC-T11GC-I7LW11 - alloy material, mounting size: PT 1¼"/21 mm, single supply voltage, 3-wire 4~20mA current output. Used for pure UV-C monitoring, germicidal lamp monitoring, and other fields.

Korean GENICOM Ultraviolet Detector - GUVC-T11GC-4LW11

Ultraviolet detector - GUVC-T11GC-4LW11 - alloy material, mounting size: PT 1¼"/21 mm, single supply voltage, analog voltage output. Used for pure UV-C monitoring, germicidal lamp monitoring, and other fields.