Sensors | PrimeIndu

US Migatron Corporation Ultrasonic Sensor - RPS-400-6

RPS-400-6 is a small high-frequency sensor. It is included in the ultrasonic sensor series to better meet the needs of the machinery manufacturing industry. RPS-400-6 is a three-wire NPN transistor output device. At 50mA, the transistor can continuously switch (output) 30VDC. RPS-400-6 is ideal for detecting transparent objects. Because it can operate in dusty environments, it is suitable for reinforced conveyors, PC board mounting

US Migatron Corporation Analog Ultrasonic Sensor - RPS-401A-80P

The RPS-401A-80P analog ultrasonic sensor is installed in a PVC cylindrical housing and operates independently. Its supply voltage is 20-30VDC and is reverse polarity protected. It also has a narrow beam angle, allowing it to enter sealed positions. A flat object can be tilted up to 10 degrees and still be detected.

US SENIX ToughSonic - TSPC-21S/21SRM/25P

The ToughSonic 50 ultrasonic sensor has a detection range of 50 feet (15.2 meters). Like all ToughSonic sensors, they are durable and easy to use in harsh industrial environments. ToughSonic 50s are fully submersible, corrosion-resistant, impact-resistant, and rugged.

US SENIX Remote Ultrasonic Level Sensor - ToughSonic REMOTE 50

The ToughSonic REMOTE 50 is a remote level sensor with a detection range of 50 feet (15.2 meters). This digital sensor is designed for accuracy and long-term durability in remote monitoring applications with a stainless steel housing. With a stainless steel housing, full epoxy encapsulation, and IP68 rating, it operates in harsh climatic conditions.

Czech Dinel Ultrasonic Level Transmitter Level Sensor - ULM-70

Suitable for continuous measurement of various liquids, bulk solids, and paste materials. Unaffected by volatile gases and vapors, temperature, pressure (vacuum), and dust. Can be used in explosive areas (options Xi/XiT) or flammable dust areas (options Xd, XdT). During measurement, it must be kept 300mm or 500mm away from the wall (depending on the option) to ensure measurement accuracy.

Korea Hagisonic Ultrasonic Sensor Module - HG-B40A, HG-B40C

The HG-B40A/HG-B40C ultrasonic sensor modules feature low power consumption, high sensitivity, and multiple input/output modes. Automatic sensitivity control function is proportional to the upper limit of distance error.

Korea Hagisonic Ultrasonic Proximity Sensor Module - HG-P40 Series

Uses only a single transceiver sensor unit to send and receive signals.

Korea Hagisonic Ultrasonic Distance Sensor Module - HG-C40U

Korea Hagisonic Ultrasonic Distance Sensor Module HG-C40U

TRI - CLS Series

Ultrasonic label sensor CLS series ultrasonic clear label sensor with OLED graphic display for monitoring sensor performance.

Korea Ecube Labs Ultrasonic Sensor Trash Bin - Clean CAP Flex

Clean CAP's ultrasonic sensor can detect solids (general waste, paper, glass, e-waste, textiles, etc.) and liquids (oil, sludge, agricultural products, etc.). The sensing distance can reach from 30 cm to 400 cm (4 meters/13 feet).

MaxBotix Ultrasonic Obstacle Avoidance Sensor - MB1043 MB1033

MB1043 MB1033 is a high-resolution (1mm), high-precision, low-power ultrasonic sensor. It is designed not only to handle interference noise but also has anti-noise interference capability. It also compensates for sensitivity for different target sizes and varying supply voltages. Additionally, it has standard internal temperature compensation, making distance measurements more accurate. For indoor environments, it is an excellent low-cost solution!

MaxBotix Drone Ultrasonic Sensor - MB7052

The drone ultrasonic sensor MB7052 is an ultrasonic sensor with IP67 protection rating, which can prevent dust ingress and withstand short-term immersion. It is encapsulated in PVC material and has certain corrosion resistance. In outdoor environments with clutter interference, it can effectively remove clutter and detect target distance information. The sensor has a resolution of up to 1 cm and can measure distances up to 7.65 meters. Therefore, it is a low-power product suitable for outdoor environments, such as drones.

MaxBotix Silo Level Ultrasonic Sensor - MB1210

The silo level ultrasonic sensor MB1210 is a low-cost ultrasonic sensor that can measure long distances (up to 7.65 meters). It not only has real-time calibration capability but also provides continuously variable gain for targets at different distances to obtain more accurate data. With a wide supply voltage range of 3.3V to 5.5V, its low power consumption also makes it suitable for battery-powered systems. Among the same series products with the same performance as MB1210, there are also versions that can measure up to 10.68 meters.

MaxBotix IP67 Waterproof Ultrasonic Level Sensor - MB7589

The MB7589 sensor has a self-cleaning function. It can gently heat the sensor surface to atomize any moisture/condensation on the transducer surface. In various applications where condensation is a problem, many require self-cleaning, and the MB7589 is specifically designed for these applications. For example, in fuel tanks or water tanks, on clear or cold nights, this makes the sensor hardware colder than the surrounding environment. On the exposed sensor hardware surface, condensation will

MaxBotix High-Performance Ultrasonic Proximity Sensor - MB1444

MB1444 features USB interface for easy installation and connection to a computer. The USB micro connector matches most current smartphones. Simple True/False output and selectable range output. Approximately 2.5 seconds object distance acquisition time, approximately 1.5 seconds object distance recovery time. Filtered distance output allows ranging and multi-sensor operation. Zero-distance object detection.

MaxBotix Pedestrian Detection Ultrasonic Sensor - MB1010

The pedestrian detection ultrasonic sensor MB1010 is an ultra-low-power, wide-beam-angle, high-sensitivity ultrasonic sensor. It can obtain reliable and stable distance data through pulse width output, analog voltage output, and serial output. It has a short measurement cycle and can measure distances up to 6.45 meters. It is also one of the company's most popular indoor ultrasonic sensors because it is an excellent low-cost general-purpose sensor.

US Hexamite Ultrasonic Sensor - Tx-HX

Distance measurement resolution from the ultrasonic transmitter is 1mm.

US Hexamite Ultrasonic Sensor - Rx-HX

Distance measurement resolution from the ultrasonic transmitter is 1mm.

Korea Hagisonic Robot Ultrasonic Sensor Module - HG-M40 Series, HG-L40 Series

The Korea Hagisonic robot ultrasonic sensor modules HG-M40 series and HG-L40 series can be used not only as transceiver modules but also as receivers or transmitters with different wiring configurations.

MaxBotix Ultrasonic Sensor Human Detection Sensor - MB1004

The ultrasonic human detection sensor MB1004 is a proximity sensor specifically with high/low level alarm signal output, with a detection range of up to 213 cm, suitable for pedestrian detection, parking detection, etc. When a pedestrian enters the detection range, MB1004 outputs an alarm signal that changes from low to high level. It also has the function of outputting the specific distance of the target, outputting distance data via RS232. MB1004 is a very low-cost human detection ultrasonic sensor.

US Migatron Corporation Intrinsically Safe Ultrasonic Sensor - RPS-409A-IS2

The RPS-409A-IS2 is an intrinsically safe analog ultrasonic sensor with various ranges available. The sensor is self-contained and installed in a 30mm cylindrical housing, powered by 16-30V DC with reverse polarity protection. RPS-409A-IS2 utilizes today's PLC and computer analog input cards. The values programmed into the PLC or computer determine the zero point and span.

US Migatron Corporation Analog Ultrasonic Sensor - RPS-409A-2P

The RPS-409A-2P analog ultrasonic sensor is a self-contained sensor installed in a PVC housing with 2" NPT thread mounting. Its supply voltage is 2-30VDC with reverse polarity protection. RPS-409A-2P utilizes today's PLC and computer analog input cards. The selected analog card determines the system resolution. The values programmed into the PLC or computer determine the zero point and span.

US SENIX Ultrasonic Level Sensor - ToughSonic REMOTE 14

The ToughSonic REMOTE 14 is a remote water level sensor with a detection range of 14 feet (4.3 meters). This digital sensor is designed for accuracy and long-term durability in remote monitoring applications with a stainless steel housing. With a stainless steel housing, full epoxy encapsulation, and IP68 rating, it can withstand harsh environmental conditions.

MaxBotix Level Ultrasonic Sensor - MB7389 MB7380

The MB7389 hrxl-maxsonar-wr sensor line provides high-accuracy, high-resolution ultrasonic proximity detection and ranging in air. This sensor line features 1mm resolution, target size and operating voltage compensation. To improve accuracy and better reject external noise sources, internal temperature compensation of sound speed and optional external temperature compensation are included.

UPA Ultrasonic Sensor - T/R55.5-15.5E279Z-L19-01

UPA ultrasonic sensor, sealed sensor, also known as parking sensor "probe", is the core component of parking sensors, using ultrasonic to measure the distance between obstacles around the vehicle.

MaxBotix Trash Can Ultrasonic Sensor - MB7139

The trash can ultrasonic sensor MB7139 is a weather-resistant ultrasonic sensor for detecting trash can capacity. This sensor is the recommended one we have tested in trash cans. It features high output sound power, continuously variable gain, real-time automatic calibration, and noise suppression algorithms, effectively achieving noise-free distance readings.

Ultrasonic Distance Measurement Module - UM0034-002

UM0034-002 is a non-contact ultrasonic distance measurement module. By measuring the time of flight of ultrasonic waves from transmission to reception, this module can detect objects within 1.2 meters and output distance signals via UART interface.

Korea Ecube Labs Ultrasonic Sensor Trash Bin - Clean CAP Plus

Clean CAP's ultrasonic sensor can detect solids (general waste, paper, glass, e-waste, textiles, etc.) and liquids (oil, sludge, agricultural products, etc.). The sensing distance can reach from 30 cm to 400 cm (4 meters/13 feet).

Ultrasonic Obstacle Avoidance Sensor Module - UM0090

UM0090 is a distance measurement module based on a transceiver-integrated ultrasonic sensor.

Japan Murata Ultrasonic Sensor - MA300D1-1

Japan Murata Ultrasonic Sensor MA300D1-1

Japan Murata Ultrasonic Sensor - MA40S4R

Japan Murata Ultrasonic Sensor MA40S4R

US SENIX ToughSonic 14 Ultrasonic Level Sensor - TSPC-30S1-232/485

The ToughSonic 14 ultrasonic sensor has a detection range of 14 feet (4.3 meters). Like all ToughSonic sensors, it is rugged and easy to use in harsh industrial environments.

Ultrasonic Level Switch - XLS-1

The XLS-1 ultrasonic level switch is a rugged product from Gems that can replace reed switch level sensors.

US Migatron Corporation Intrinsically Safe Analog Ultrasonic Sensor - RPS-409A-IS

The RPS-409A-IS is an intrinsically safe analog ultrasonic sensor, powered by 16-30VDC with reverse polarity protection. RPS-409A-IS2 has a 0-10VDC analog output with short circuit protection. The analog voltage per inch is fixed based on the maximum range of the device. RPS-409A-IS utilizes today's PLC and computer analog input cards. The values programmed into the PLC or computer determine the zero point and span.

Spain Calypso Instruments Ultrasonic Anemometer - ULTRASONIC PORTABLE

Built-in ultrasonic sensors will provide you with maximum accuracy, which we have in an anemometer. Allows continuous measurement of wind speed and direction.

MaxBotix Human Distance Sensor Ultrasonic Sensor - MB1014

The human distance sensor MB1014 is specifically designed for pedestrian and object detection, and allows multiple sensors to operate simultaneously in the same environment. Powered by 2.5V to 5.5V, MB1014 provides proximity detection of specific distance objects in a very small form factor. The human distance sensor MB1014 allows users to integrate multiple sensors into a single system with little or no mutual interference that often occurs with other ultrasonic sensors. MB1014's

Japan Murata Ultrasonic Sensor - MA40S4S

Japan Murata Ultrasonic Sensor MA40S4S

MaxBotix Ultrasonic Level Sensor - MB7066

The ultrasonic level sensor MB7066 is a small but rugged weather-resistant ultrasonic sensor. It meets IP67 protection rating, can prevent dust ingress, and withstand short-term immersion. With high output sound power, continuously variable gain, real-time automatic calibration, and excellent noise suppression algorithms, it effectively achieves noise-free distance readings. Even in the presence of many acoustic or electronic noise sources, stable and reliable distance readings can be obtained. It can measure distances up to

Italy AEP Pressure Sensor - TP7DN

The TP7DN pressure sensor is specifically designed for measuring relative pressure and is suitable for gas and liquid pressure measurement, including sewage, steam, mildly corrosive liquids, and gases. The pressure chamber of TP7DN is machined from a single-piece 17-4PH stainless steel structure, with all-metal sealing and no leakage. Due to no O-rings, no welds, and no direct contact with the measured medium, its stability and durability are excellent.

Canada FISO Side-View Fiber Optic Pressure Sensor - FOP-MSL

The FOP-MSL fiber optic pressure sensor is very rugged and can be used in harsh environments. This sensor is designed for use where other sensors cannot measure. When a vertical measurement instrument with a standard fiber optic sensor cannot measure, a side-view sensor can be used for measurement.

Canada FISO Fiber Optic Pressure Sensor - FOP-MA

The fiber optic acoustic pressure sensor FOP-MA is specially designed for acoustic and micro-acoustic applications. Using MOMS technology, the sensor can accurately measure pressure. Its high sensitivity and high frequency response make it an ideal sensor for measuring micro-acoustic characteristics. It is intrinsically safe and completely immune to electromagnetic and radio frequency interference.

Canada FISO Fiber Optic Pressure Sensor - FOP-MIV

The fiber optic pressure sensor FOP-MIV is designed for medical OEM equipment. Its exceptional measurement performance is ideal for pressure monitoring in vascular, uterine, or cranial cavities. The large measurement range and small size (550um diameter) design make the FOP-MIV pressure sensor ideal for instruments mounted in catheters. The pressure sensor is immune to electromagnetic and radio frequency interference, and can achieve high-precision measurements even in strong electromagnetic/RF environments such as electro-anatomical knives or MRI interference.

Gauge Pressure Sensor - PG Series

The durable PG series pressure sensors are suitable for a variety of HVAC/R and industrial applications, such as refrigeration measurement, air pressure measurement, gas pressure measurement, and pump inlet and outlet fluid pressure. They can even be used in extreme applications such as aerospace and motorsport equipment.

Digital PX Series Differential Pressure Transmitter - PX-d0115-pd

The digital PX series differential pressure transmitter PX-d0115-pd has good overpressure and vibration resistance, reducing field failures. The high-precision digital sensor maintains calibration and reduces recalibration.

Pressure Sensor - CS-PT1350

The pressure sensor CS-PT1350 uses internationally advanced ceramic capacitive pressure sensor elements and transmitter-specific integrated circuits, specially designed for air conditioning, refrigeration, and other industrial fields. It features small size, micro current, forward and reverse overvoltage protection, large overload capacity, high electrical strength, wide temperature range, and resistance to static and surge electromagnetic interference.

US NovaLynx Barometric Pressure Sensor - 230-600 & 230-601

The 230-600 series provides unparalleled performance and stability for barometric pressure measurement. The 230-600C provides 4-20 mA current output, and the 230-600V provides 0-5 Vdc output. Both provide analog output and serial output.

US NovaLynx Barometric Pressure Sensor - 230-WE100

The 230-WE100 barometric pressure sensor has a measurement range of 800~1100 mb. The barometric pressure transmitter is fully temperature compensated over the operating range of -40° to 65°C. It is configured with 4-20 mA two-wire current loop output. It comes with a marine-grade 7.6-meter cable, and can be extended up to 152 meters as needed.

Pressure Sensor - MSP340

The msp340 pressure sensor has a range of up to 10kpsi or 700bar, making it ideal for high-capacity, commercial, and industrial applications. This series is suitable for measuring liquid or gas pressure, contaminated water, steam, and mildly corrosive liquids.

US MEAS 316L Stainless Steel Pressure Sensor - 89CV

The stainless steel pressure sensor 89CV is a small-volume, media-compatible, 316L stainless steel packaged silicon piezoresistive pressure sensor. This product has a constant voltage characteristic with 5/16-32 UNEF threads and can be welded in place. It can be packaged into various threaded connectors such as 1/4, 1/8 NPT, fittings, and custom designs. Thread customization can be contacted with the factory.

US MEAS 316L Stainless Steel Pressure Sensor - 86A

The 316L stainless steel pressure sensor 86A constant voltage is a small-volume, media-compatible, 316L stainless steel packaged silicon piezoresistive pressure sensor. This product is designed for O-ring mounting. This sensor uses silicone oil to transfer pressure to the 316L stainless steel diaphragm.

US MEAS Silicon Piezoresistive Pressure Sensor - 154BC

The 154BC silicon piezoresistive pressure sensor is a small-volume, 19mm diameter, media-compatible silicon piezoresistive pressure sensor packaged in 316L stainless steel or 2CP grade ASTM titanium. This product is low-cost and has no O-ring design, specifically designed for OEM applications that require compatibility with corrosive media. The titanium option provides greater corrosion resistance and harsh chemical cleaning, expanding its application range such as medical dialysis machines and salt/micro

US MEAS Digital Pressure and Altitude Sensor - MS5637-30BA

The digital pressure and altitude sensor MS5637-30BA has been optimized for barometric pressure measurement systems with a resolution of 0.5 mbar. The sensor module contains a highly linear pressure sensor and an ultra-low-power 24-bit ΔΣ ADC with internal factory calibration coefficients.

US MEAS Small Board-Level Analog Pressure Sensor - MS5525ASO

The MS5525ASO is fully calibrated and temperature compensated with a total error band (TEB) of less than 2.5% of the compensated range. The sensor operates normally with a 5.0V DC supply and requires no external components. The sensor is available with top straight port, top barbed port, and various interfaces, and can measure absolute, differential, and compound pressures from 1 to 30 psi.

US MEAS Ceramic Pressure Sensor - MS4515

The US MEAS ceramic pressure sensor MS4515 uses laser-trimmed resistors to achieve overall temperature compensation over the 0-50°C range. This pressure sensor can measure absolute, gauge, or differential pressures from 0-1 to 0-300 psi. The pressure port is a 1/8" barbed tube that can be connected to a 3/32" inner diameter tube.

US MEAS Silicon Piezoresistive Pressure Sensor - MS4426

The US MEAS silicon piezoresistive pressure sensor MS4426 is a temperature-compensated, piezoresistive silicon pressure sensor in a dual-in-line package, mainly used for cost-sensitive applications requiring excellent performance and long-term stability.

US MEAS Silicon Piezoresistive Pressure Sensor - MS4425

The MS4425 is a temperature-compensated, silicon piezoresistive pressure sensor in a dual-in-line package, mainly used for cost-sensitive applications requiring excellent performance and long-term stability.

US MEAS Silicon Piezoresistive Pressure Sensor - 27AND37

The US MEAS silicon piezoresistive pressure sensor 27AND37 uses Measurement Specialties' proprietary UltraStable™ die to provide excellent performance and long-term stability over a wide temperature range. Gauge and differential pressure ranges from 0-15 to 0-250 psi are available.

Honeywell Pressure Sensor - 19 mm Series

The 19 mm series heavy-duty pressure sensor, compensated, 0 psi to 3 psi, gauge, with battery with housing O-ring, 10 Vdc excitation. Honeywell's stainless steel 19C, 19U, and 19 vacuum gauge series sensors are used in pressure applications requiring measurement of hazardous media in harsh environments, compatible with 316 stainless steel. This special vacuum gauge series sensor is specifically designed for applications that may be exposed to vacuum.

Honeywell Pressure Sensor - PX2 Series

Honeywell's PX2 series heavy-duty pressure sensors are a series of configurable pressure sensors that use ASIC (Application-Specific Integrated Circuit) signal-conditioned piezoresistive sensing technology and are configured with stainless steel housings. The PX2 series uses an on-board ASIC for full calibration and compensation of sensor zero, sensitivity, temperature effects, and nonlinearity.

Germany TECSIS Pressure Sensor - F1802

The compression-type load cell F1802 series, made of alloy steel, laser welded and sealed, is suitable for pressure detection in various harsh environments. It is easy to install and can be used in industrial weighing systems such as truck scales, floor scales, and silos.