Sensor | PrimeIndu

Italy Brahma UV Sensor - FD1/S

The UV sensor FD1/S uses a silicon pre-amplified active element, designed for blue flame burner applications; the sensor's UV light detection limit is 310nm. The appropriate electronic interface inside the device makes it compatible with all BRAHMA devices suitable for gas applications.

Italy Brahma UV Sensor - FD2/S

The UV sensor FD2/S uses a silicon pre-amplified active element, designed for blue flame burner applications; the sensor's UV light detection limit is 310nm. The appropriate electronic interface inside the device makes it compatible with all BRAHMA devices suitable for gas applications.

Infrared photoelectric crystal receiver tube

Infrared Phototransistor Receiver - SD2440

Photoelectric crystal (receiver tube) SD2440, 1.5mm metal-packaged infrared photoelectric sensor. Operating temperature -55°C to +125°C, angular response 48°, minimum photocurrent 7.0 mA.

Korea rezontech Flame Detector - RFD-2000X-H

RFD-2000X-H is a hydrogen UV/IR flame detector.

Korea rezontech Flame Detector - RFD-3000

RFD-3000 is a multi-spectral infrared (IR) detector suitable for general field, indoor, and outdoor applications.

Germany SGLUX UV Photodiode - SG01L-B5/SG01L-B18

Silicon Carbide UV Photodiode SG01L-B5 is mainly used for flame control (industrial boilers), water treatment (insurance of UV intensity), UV astronomy, projectile tracking (UV cameras), ozone and pollutant monitoring, flame sensing (fire alarm safety devices for oil droplet monitoring), testing UV intensity in sunlight (gifts, cosmetic appliances), and UV lamp intensity testing (inspection of disinfection efficiency for medical devices or household disinfection cabinets), etc.

German SGLUX silicon carbide UV photodiode

Germany SGLUX Silicon Carbide UV Photodiode - SG01XL-B5

Silicon carbide UV photodiode SG01XL-B5 is mainly used for flame control (industrial boilers), water treatment, UV astronomy (array detection), projectile tracking (UV cameras), ozone and pollutant monitoring, flame sensing (fire alarm safety devices, oil droplet monitoring), testing UV intensity in sunlight (gifts, cosmetic appliances), UV lamp UV intensity testing (disinfection efficiency inspection of medical devices or household disinfection cabinets), etc.

Germany SGLUX UV Photodiode - SG01XL-A5

The UV photodiode SG01XL-A5 is mainly used for flame control (industrial boilers), water treatment (UV intensity insurance), UV astronomy (array detection), projectile tracking (UV camera), ozone and pollutant monitoring, flame sensing (fire alarm safety devices and oil droplet monitoring), testing UV intensity in sunlight, and UV intensity testing of UV lamps (disinfection efficiency inspection for medical devices or household disinfection cabinets), etc.

Germany SGLUX UV Photodiode - SG01S-C5/SG01S-C18

UV Photodiode SG01S-C5/SG01S-C18 is mainly used for flame control, water treatment (insurance of UV intensity), UV astronomy (array detection), projectile tracking (UV cameras), ozone and pollutant monitoring, flame sensing (fire alarm safety devices for oil droplet monitoring), testing UV intensity in sunlight (gifts, cosmetic appliances), and UV lamp intensity testing (inspection of disinfection efficiency for medical devices or household disinfection cabinets), etc.

Germany SGLUX UV Photodiode - SG01S-B18

UV Photodiode SG01S-B18 is mainly used for flame control, water treatment, UV astronomy, projectile tracking, ozone and pollutant monitoring, flame sensing, testing UV intensity in sunlight, and UV lamp intensity testing, etc.

Germany SGLUX UV Photodiode - SG01S-A18

Silicon Carbide UV Photodiode SG01S-A18 is mainly used for flame control (industrial boilers), water treatment (insurance of UV intensity), UV astronomy (array detection), projectile tracking (UV cameras), ozone and pollutant monitoring, flame sensing (fire alarm safety devices for oil droplet monitoring), testing UV intensity in sunlight, and UV lamp intensity testing (inspection of disinfection efficiency for medical devices or household disinfection cabinets), etc.

Germany SGLUX UV Photodiode - SG01M-C5

The UV photodiode SG01M-C5 is mainly used for flame control (industrial boilers), water treatment (UV intensity insurance), UV astronomy (array detection), projectile tracking (UV cameras), ozone and pollutant monitoring, flame sensing (fire alarm safety devices for oil droplet monitoring), testing the UV intensity in sunlight, and UV intensity testing of UV lamp tubes (for disinfection efficiency inspection of medical devices or household disinfection cabinets), among others.

Germany SGLUX UV Photodiode - SG01M-B5/SG01M-B18

UV photodiodes SG01M-B5/SG01M-B18 are mainly used for flame control (industrial boilers), water treatment (UV intensity insurance), UV astronomy (array detection), bullet tracking (UV cameras), ozone and pollutant monitoring, flame sensing (fire alarm safety devices, oil droplet monitoring), testing UV intensity in sunlight, and UV intensity testing of UV lamps (disinfection efficiency inspection of medical devices or civil disinfection cabinets), etc.

Germany SGLUX UV Photodiode - SG01M-A18

UV Photodiode SG01M-A5/SG01M-A18 is mainly used for flame control (industrial boilers), water treatment (insurance of UV intensity), UV astronomy (array detection), projectile tracking (UV cameras), ozone and pollutant monitoring, flame sensing (fire alarm safety devices for oil droplet monitoring), testing UV intensity in sunlight, and UV lamp intensity testing (inspection of disinfection efficiency for medical devices or household disinfection cabinets), etc.

Germany SGLUX UV Photodiode - SG01L-A18

UV photodiodes SG01L-A5/SG01L-A18 are mainly used for flame control (industrial boilers), water treatment (UV intensity insurance), UV astronomy (array detection), bullet tracking (UV cameras), ozone and pollutant monitoring, flame sensing (fire alarm safety devices, oil droplet monitoring), testing UV intensity in sunlight, and testing the UV generation intensity of UV lamps (disinfection efficiency inspection of medical devices or civil disinfection cabinets), etc.

Germany SGLUX UV Photodiode - SG01D-B18

The UV photodiode SG01D-B18 is mainly used for flame control (industrial boilers), water treatment (UV intensity insurance), UV astronomy (array detection), projectile tracking (UV cameras), ozone and pollutant monitoring, flame sensing (fire alarm safety devices and oil droplet monitoring), testing UV intensity in sunlight, and UV lamp UV intensity testing (disinfection efficiency inspection for medical devices or household disinfection cabinets), etc.

Germany SGLUX UV Photodetector - TOCON_ABC10

TOCON_ABC10 is a 5V powered UV photodetector with an integrated amplifier that converts UV radiation into a 0-5V voltage output. The TOCON's output voltage pin can be directly connected to a controller, voltmeter, or other data acquisition device with voltage input. Highly modern electronic components and a sealed metal housing with a UV glass window eliminate noise or electromagnetic interference caused by parasitic resistance paths inside the package.

Korea GENICOM Visible Light Sensor - GVGR-S11SD

The GVGR-S11SD light sensor chip is less than 0.4mm, SMD3528 package, InGaN material, photovoltaic mode operation, high response, low dark current, applied in: UV LED monitoring (385, 405nm, etc.), green LED monitoring, UV lamp monitoring, UV curing, and other fields.

Korea rezontech Flame Detector - RFD-3000X

The RFD-3000X is a multi-spectral infrared (IR) detector suitable for application in hazardous and safe sites, both indoor and outdoor.

Korea rezontech Flame Detector - RFD-2000X

The RFD-2000X is an ultraviolet infrared flame detector suitable for applications in hazardous and safe sites, both indoor and outdoor.

Germany SGLUX UV Photodiode - SG01L-C5/SG01L-C18

UV photodiodes SG01L-C5/SG01L-C18 are mainly used for flame control (industrial boilers), water treatment (UV intensity insurance), UV astronomy (array detection), projectile tracking (UV cameras), ozone and pollutant monitoring, flame sensing (fire alarm safety devices, oil droplet monitoring), testing UV intensity in sunlight, and UV intensity testing of UV lamps (disinfection efficiency inspection for medical devices or household disinfection cabinets), etc.

Germany SGLUX UV Photodiode - SG01D-C18

The UV photodiode SG01D-C18 is mainly used for flame control (industrial boilers), water treatment (UV intensity insurance), UV astronomy (array detection), projectile tracking (UV cameras), ozone and pollutant monitoring, flame sensing (fire alarm safety devices for oil droplet monitoring), testing UV intensity in sunlight (gifts), and UV intensity testing of UV lamps (disinfection efficiency inspection for medical devices or household disinfection cabinets), among others.

Germany SGLUX UV Photodiode - SG01XXL-8ISO90

SiC can withstand extreme radiation hardness, has an almost visible-blind region, low dark current, high-speed response, and low noise characteristics; these features make SiC an excellent material for visible-blind ultraviolet detectors. SiC detectors can operate at temperatures up to 170°C, and SiC photodiodes can serve as unfiltered broadband detection devices or with optical filters, providing response to UVA, UVB, and UVC bands.

Germany SGLUX UV Photodiode - SG01XL Series

SiC can withstand extreme radiation hardness, is nearly visible-blind, has low dark current, high-speed response, and low noise; these features make SiC an excellent material for visible-blind UV detectors. SiC detectors can operate at temperatures up to 170°C. SiC photodiodes can be used as unfiltered broadband detection devices or with optical filters to provide response to UVA, UVB, and UVC bands.

Germany SGLUX UV Photodiode - SG01F-5ISO90

SiC can withstand extreme radiation hardness, is nearly visible-blind, and possesses special properties of low dark current, high-speed response, and low noise; these features make SiC an excellent material for visible-blind ultraviolet detectors. SiC detectors can operate at temperatures up to 170°C, and SiC photodiodes can serve as unfiltered broadband detection devices or with optical filters, providing response to UVA, UVB, and UVC bands.

German HLP pyroelectric infrared temperature sensor

Germany HLP Pyroelectric Infrared Temperature Sensor - TSEV01CL55

Typical applications of the infrared temperature sensor TSEV01CL55: air conditioners, microwave ovens, ovens, printers, bearings, cylinders, etc.

Rain Detector (rain, snow, hail) - WSX53A24

The rain sensor WSX53A24 is specifically designed to detect various forms of precipitation (rain, snow, hail); it features two sets of volt-free changeover contacts for output, which detect precipitation and snow point temperature respectively through continuity testing to distinguish between rain and snow; an event delay function can extend the contact deactivation time; it can be used to activate devices such as blowers, heaters, boilers, door and window closing mechanisms, water pumps, engines, blinds, and other devices that need to respond to external weather conditions.

Korean syhitech resistive polymer humidity sensor

Korea syhitech Resistive Polymer Humidity Sensor - SYH-2R

Resistive polymer humidity sensor (SYH-2R): low cost, high performance, extremely low hysteresis, fast response time, small size, wide humidity measurement range, good product consistency;

Korea syhitech Humidity Sensor - SYH-1/SYH-1S

Humidity Sensor SYH-1/SYH-1s typical applications: suitable for occasions with small size and low accuracy requirements.

Immersion Temperature Sensor - Threaded Fitting - TIHA0B0

Immersion temperature sensor TIHA0B0 embedded probe type temperature sensor, high accuracy, low cost. Easy installation. The sensor is housed in a corrosion-resistant stainless steel probe, rugged and durable, compatible with 1/2" NPT thread standard.

Immersion Temperature Sensor - Pipe - TIDA0B0

Immersion temperature sensor TIDA0B0 embedded probe type temperature sensor, high precision, low cost. Easy installation. The sensor is housed in a corrosion-resistant stainless steel probe, rugged and durable, compatible with 1/2" NPT thread standard.

Immersion Temperature Sensor - Waterproof - TIWA1B1

Immersion Temperature Sensor TIWA1B1 Embedded Probe Type Temperature Sensor, High Accuracy, Low Cost. Easy Installation. The sensor is housed in a corrosion-resistant stainless steel probe, rugged and durable, compatible with 1/2" NPT thread standard.

Immersion Temperature Sensor - L Entry - TIGA0B0

Immersion Temperature Sensor TIGA0B0 Embedded Probe Type Temperature Sensor, high accuracy, low cost. Easy installation. The sensor is housed in a corrosion-resistant stainless steel probe, rugged and durable, compatible with 1/2" NPT thread standard

Duct temperature sensor – indoor enclosure

Duct Temperature Sensor - Indoor Box - TFBBR00

Veris pipe-mount temperature sensor, pre-calibrated, housed in a rugged stainless steel probe. These devices are easy to install, durable, and highly accurate. Flange-mounted, with resistance output and sheet metal enclosure.

Duct Temperature Sensor - Open - TDBBR00

Veris duct-mounted temperature sensors, pre-calibrated, housed in rugged stainless steel probes. These devices are easy to install, durable, and highly accurate. Flange-mounted, with resistive output and foam pad.

Duct Temperature Sensor - Rainproof - TGBBR00

Veris duct-mounted temperature sensors, pre-calibrated, housed in rugged stainless steel probes. These devices are easy to install, durable, and highly accurate. Flange-mounted, with resistive output and waterproof housing.

Duct Temperature Sensor - Transmitter - TDDAM10

Veris duct-mounted temperature sensors, pre-calibrated, housed in rugged stainless steel probes. These devices are easy to install, durable, and highly accurate.

Wall-Mounted Temperature Sensor - Deluxe - TWLPXXX

The TWLP series incorporates BACnet and Modbus communication protocols to communicate temperature readings with building automation system controllers. Setpoint sliders and button override options provide additional local input.

Wall-Mounted Temperature Sensor - Standard - TPB0

TP embedded temperature sensors are used to monitor room temperature and are suitable for spaces where moisture and steam are a concern. The back of the TP is insulated to reduce the influence of internal wall temperature. TP sensors are designed for indoor applications only. These sensors are highly accurate and reliable, with an extended 5-year warranty.

Recessed Temperature Sensor - TSB0

The recessed temperature sensor TSB0 is installed in an unobtrusive housing on the ceiling. This easy-to-install device is ideal for office environments, as well as museums, art galleries, or other open areas. These sensors feature high accuracy, reliability, and include an extended 5-year warranty.

Ceiling Temperature Sensor - TCBB0

The TC sensor is installed in an unobtrusive housing on the ceiling. This easy-to-install device is ideal for office environments, as well as museums, art galleries, or other open areas. These sensors feature high accuracy, reliability, and include an extended 5-year warranty.

Duct Humidity Sensor - Standard - HED2MSTA1

The HDE economy series humidity transmitters offer a range of humidity control solutions at an affordable price. All devices include embedded electronics to prevent condensation. Thin-film capacitive sensors provide high performance and accuracy. Duct-mounted HED models feature a sturdy ABS housing. All economy models come with a one-year warranty.

Wall-Mounted Humidity Sensor - Standard - HEW2MSTA

The HEW economy series humidity transmitters offer a range of humidity control solutions at an affordable price. Thin-film capacitive sensors provide high performance and accuracy. Wall-mounted HEW models include an attractive and durable housing for easy installation. All economy models come with a standard one-year warranty.

Duct Average Temperature Sensor - TAHB0 - TAHB0

The TA series includes two types of sensors: flexible TA and rigid TAR. These sensors average the temperature over the entire length of the copper tube, making them ideal for pipe temperature measurement.

NovaLynx USA temperature & humidity sensor

USA NovaLynx Temperature & Humidity Sensor - 225-THT-1

The 225-THT-1 temperature & humidity sensor is used to measure relative humidity and temperature in environmental control systems, where condensation or dust is frequently encountered. The rugged waterproof housing, locking strain relief connector, and brass sintered filter protect the electronic circuits and sensor from environmental or mechanical damage.

NovaLynx USA relative humidity and temperature sensor

USA NovaLynx Relative Humidity and Temperature Sensor - 225-HMP60A

The relative humidity and temperature sensor 225-HMP60A uses a laser-trimmed capacitive INTERCAP for accurate relative humidity measurement. The chip is user-replaceable and requires no calibration. The membrane filter protects against dust and dirt. The 225-HMP60A also measures temperature. If the sensor is placed outdoors, a solar radiation shield needs to be installed.

USA NovaLynx Fuel Moisture Stick - 225-7917, 225-7918

Fuel moisture sticks 225-7917, 225-7918 are used to assess the moisture content of small forest fuels in prescribed burning operations and to determine forest fire danger ratings. Place the sticks in a bed of accumulated needle or broadleaf litter to measure the moisture content. Then weigh the exposed sticks on a fuel moisture scale; the weight above the oven-dry weight represents fuel moisture. Sticks should be replaced every 90 days.

USA NovaLynx Temperature Sensor - 210-4470 & 210-4480

NovaLynx offers a range of temperature probes for measuring air, water, and soil temperature. Most probes can be connected to different data loggers with some additional external adjustment resistors. Some probes require signal conditioning to produce a linear analog output, such as 0-5 Vdc or 4-20 mA. For accurate air temperature measurements, the probe should be placed in a solar radiation shield. NovaLynx offers a variety of solar radiation shields to choose from.

USA NovaLynx Water Temperature Sensor - 210-101W

The 210-101W water temperature sensor is a rugged, reliable device for high-accuracy submersible water or soil temperature measurement. It produces a 4-20 mA output signal, which is the industry standard for process control monitoring. Most PLCs (programmable logic controllers), SCADA equipment, and data acquisition systems directly accept this signal.

TS - TS-FTWI5

The TS-FTWI5 wall-mounted temperature and humidity transmitter uses an original imported temperature and humidity sensing module, processed by a high-performance microcontroller, resulting in superior overall performance and better long-term stability.

TS - TS-FTWI4 Sensor

The TS-FTWI4 wall-mounted current-type temperature and humidity sensor uses an original imported temperature and humidity sensing module, processed by a high-performance microcontroller, resulting in superior overall performance and better long-term stability.

TS - TS-FTWI3 Voltage Type

The TS-FTWI3 wall-mounted temperature and humidity sensor uses an original imported temperature and humidity sensing module, processed by a high-performance microcontroller, resulting in superior overall performance and better long-term stability.

Thermal resistance series temperature sensors

RTD Series Temperature Sensors - Pt10, Pt100, Pt500, Pt1000

Sheathed thermal resistors are widely used in aviation, atomic energy, petroleum, chemical, metallurgy, machinery, electric power and other industrial sectors and scientific research fields. They are usually used in conjunction with display instruments, recording instruments, electronic computers, etc. They directly measure the temperature of liquids, vapors, gases, and solid surfaces within the range of 0-1300℃ in various production processes. They are especially suitable for installation in special temperature measurement places with narrow pipelines, bends, and requirements for rapid response and miniaturization.

Indoor Split Temperature and Humidity Sensor - TS-FTDO4Y-2305

The indoor split temperature and humidity sensor TS-FTDO4Y-2305 uses an original imported temperature and humidity sensing module, processed by a high-performance microcontroller, resulting in superior overall performance and better long-term stability.

French Humirel capacitive linear voltage output temperature and humidity sensor

France Humirel Capacitive Linear Voltage Output Temperature and Humidity Sensor - HTM2500

Capacitive linear voltage output temperature and humidity sensor HTM2500, a voltage output humidity module HTM2500 based on HS1101/HS1101LF, with high reliability and long-term stability. When powered at 5VDC, 0~100%RH corresponds to a linear voltage output of 1~4VDC, with very low temperature dependence, and also provides temperature measurement.

Wireless Temperature and Humidity Sensor - T801/802-EX, HT201/202

Wireless temperature and humidity sensor T801/802-EX, HT201/202 eight-channel wireless temperature measurement node, digital temperature sensor, used for industrial site temperature monitoring, oilfield oil pipeline temperature monitoring, logistics temperature monitoring, etc.