Sensor | PrimeIndu

Germany SGLUX UV Photodiode - SG01XL-C5

SG01XL-C5 UV photodiode is mainly used for flame control, water treatment, UV astronomy, projectile tracking, ozone and pollutant monitoring, flame sensing, testing UV intensity in sunlight, and testing the UV output intensity of UV lamps.

Korea GENICOM Visible Light Sensor - GVBL--T12GD

330-445nm UV-Visible Sensor GVBL-T12GD, mainly monitors 365nm/385nm band, responsivity: 0.13A/W, based on indium gallium nitride, output is typically 550nA at 1mw/cm² light intensity, mainly used for UV curing.

Korea GENICOM UV Sensor - GUVCL-T10GD

UV-C LED Monitoring (265, 270, 280nm) Pure UV-C Monitoring Sterilization Lamp Monitoring

Germany SGLUX UV Photodiode - SG01D–5LENS

SiC possesses unique characteristics, capable of withstanding high-intensity radiation, being nearly insensitive to visible light, producing low dark current, fast response speed, and low noise. These characteristics make SiC an excellent material for visible-blind semiconductor ultraviolet detectors.

Korea GENICOM Reflective UV Sensor - GUVF-P12MD

Reflective UV sensor GUVF-P12MD, featuring a receiving part - UV absorption filter, responds to fluorescent ink, used in currency detection and counterfeit bill detection.

Korea GENICOM UV Sensor - GUVB-C21SD

UVB UV Sensor GUVB-C21SD, with high sensitivity and good solar blindness, peak response at 300nm band, COB2418 package (Al housing). Mainly used for UV index monitoring, UV-B lamp monitoring, and medical applications.

Korea GENICOM UV Sensor - GUVA-C22SD

UV Sensor GUVA-C22SD, with good visible blindness, high response, low dark current, used for UV index monitoring and UV-A lamp/LED monitoring, etc.

Korea GENICOM Reflective UV Sensor - GenUV-L365P-MM

Reflective UV Sensor - GenUV-L365P-MM, with receiving part - UV absorption filter, fluorescent ink response, used for currency detection and counterfeit bill detection.

Korea GENICOM Digital UV Sensor - GUVB-C31SM

Digital UV sensor GUVB-C31SM monitoring 240-320nm, operating temperature -30°C to 85°C, OLGA package, gallium nitride substrate, I2C slave interface, power supply voltage 2.6~3.6V, mainly used for smart wearables.

Korea GENICOM UV Sensor - GUVC-T10GD-L

UVC band UV Sensor GUVC-T10GD-L, detects peak wavelength at 254nm, has good solar blindness, large photosensitive area, mainly used for pure UV-C monitoring, sterilization lamp monitoring, and close-range flame detection.

Korea GENICOM UV Sensor - GUVC-T11GD

Pure UV-C monitoring sterilization lamp monitoring

UK SKYE UVB Sensor - SKU430

The SKU 430 UVB sensor is used to measure the 280~315nm range in the ultraviolet band. The shorter wavelength portion of UVA is absorbed by transparent glass. Most of the medium-wave ultraviolet radiation in sunlight is absorbed by the ozone layer, with less than 2% reaching the Earth's surface, and it is particularly intense in summer and in the afternoon.

Korea GENICOM UV Sensor - GUVV-T10GD

GUVV-T10GD UV sensor: chip size 0.4mm, TO 46 package, InGaN material, photovoltaic mode operation, high responsivity, low dark current. Applications: full UV band monitoring, UVA band UV lamp monitoring, sterilization lamp monitoring, and other fields.

UK SKYE UV Index Sensor - SKU440

SKU 440 UV Index Sensor reflects the risk value of ultraviolet rays through the UV index. Strong ultraviolet rays can cause sunburn or skin cancer. When the UV index reaches 15 or above, it is a high-risk value.

UK SKYE UVA Sensor - SKU421

SKU 421 UVA Sensor is used to measure 315~400nm in the ultraviolet band. UVA has strong penetrating power and can penetrate most transparent glass and plastics.

German SGLUX silicon carbide UV photodiode

Germany SGLUX Silicon Carbide UV Photodiode - SG01M–A5

Silicon Carbide UV Photodiode SG01M–A5 uses silicon carbide (SiC) material, suitable for UVA band, effective detection area 0.2mm2

German SGLUX silicon carbide-based ultraviolet photodiode

Germany SGLUX Silicon Carbide UV Photodiode - SG01L–A5

The silicon carbide (SiC)-based ultraviolet photodiode SG01L-A5 is suitable for the UVA band, with an effective detection area of 1.0 mm², and a peak irradiance of 10 μW/cm² generates approximately 3.7 nA of current.

Germany SGLUX UV Photodetector - TOCON_C1

TOCON is a 5V-powered UV light detector with an integrated amplifier that converts UV radiation into a 0~5V voltage.

Water quality sensor (inline installation

Water Quality Sensor (Online installation - S660 series

Inline installation - PH industrial electrode, applied to pH measurement of liquids in conventional pressurized or sealed containers and pipelines. For example, it can be installed on the side of a water tank for tank pH measurement, or on the side of a pipeline. It is interchangeable with many other industrial electrodes on the market.

American Sensorex water quality sensor (submersible installation

US Sensorex Water Quality Sensor (Submersible installation - S650CD\S651CD\S651CD-LC

PH industrial electrode - submersible installation, used for online pH measurement of liquids in conventional open areas, such as pH measurement in storage tanks, sewage tanks, water treatment pH measurement, pond pH measurement, etc. Especially suitable for environments with high suspended solids or low flow flocculent bodies.

Water Quality Sensor (Flat surface laboratory pH electrode) - S450C\S450CD\S450CDHF

The flat surface laboratory pH electrode is mainly used for pH measurement on flat surfaces, such as pH measurement of electrophoresis gels, agar, certain food surfaces, soil surfaces, and paper.

Water quality sensor (low ionic strength pH electrode)

Water Quality Sensor (Low-ion pH electrode) - S650KD-LC

Low ionic strength test samples may cause drift and instability in pH electrode measurement results, making it difficult to control the measurement process. We offer electrodes with special structures to help solve these problems.

Sensorex water quality sensor from the United States (PH industrial electrode)

US Sensorex Water Quality Sensor (pH Industrial Electrode) - S675

S600 PH Industrial Electrode - Insertion mounting is used for PH measurement of liquids in pressurized or sealed containers and pipelines. For example, it can be installed on the side of a water tank for PH measurement, or on the side of a pipeline. It can be connected to a ball valve, so that the pipeline does not need to be disconnected when replacing the electrode.

Water Quality Sensor (S600 pH Industrial Electrode - S645CD

Water quality sensor PH industrial electrode - bypass (side-stream) installation is mainly used for sanitary samples and samples in continuous operation: for example, online pH measurement in the food industry, online pH measurement in the beverage industry, online pH measurement in the beer industry, and online pH measurement in oil products.

American sensorex water quality sensor (mercury-free pH electrode)

US Sensorex Water Quality Sensor (Mercury-free pH electrode) - S200CIT\SG200CIT\S201CIT

Mercury-free pH electrodes mainly include S200CIT, SG200CIT, S201CIT, SG201CIT and other products. The pH electrode head has a soaking storage bottle with built-in storage solution, and the pH electrode head is immersed in it, so it can be used immediately. Traditional glass/plastic pH indicator electrodes can be interchanged with almost any existing instrument on the market. By selecting appropriate signal cables, interfaces, and electrode models, your needs can be fully met.

American Sensorex water quality sensors (high-precision research-grade electrodes)

US Sensorex Water Quality Sensor (High-precision research-grade electrode) - S1010CD\S1021CD\S1030CD

High-precision research-grade electrodes include products such as S1010CD and S1021CD. PHASE electrodes provide faster, more accurate, and more stable pH measurements than standard electrodes, even when the sample temperature changes significantly. They are ideal tools for quality control and research. All PHASE electrodes are combination electrodes with built-in double-junction reference electrodes. These features prevent silver ions inside the electrode from contacting the sample, avoiding interference reactions with heavy metals, sulfides, and proteins.

Sensorex water quality sensor from the United States (glass-body pH electrode)

American sensorex water quality sensor (glass body pH electrode) - SG200C, SG200CD, SG224CD

Glass-body pH electrodes are made of glass material and feature a sturdy pH glass bulb. Various diameters, lengths, and shapes are available to suit a variety of special needs. All laboratory glass electrodes come with a soaking storage bottle, so the electrode can be used immediately.

Water quality sensor (plastic body pH electrode) - S150C, S200C

Plastic body pH electrodes mainly include S150C, S200C, S200CD, S100C, S300C, S223C, S223CD, S224C and other products. The electrodes can be matched with almost any existing instrument on the market and are widely used in process technology and monitoring, papermaking, plastic chemical industry, calcination plants, water treatment, sewage, cooling water and other fields.

Supply American sensorex dissolved oxygen transmitter - DO500, DOMA-10 and DOMA-20

The dissolved oxygen transmitter DO500 is a 4-20mA loop-powered transmitter that allows galvanic dissolved oxygen sensor signals to be sent over a 4-20mA loop (DO6400 series, 971651). The built-in electronic circuit converts the raw millivolt sensor signal to a 4-20mA output. The display can be programmed to read % saturation or mg/mL or ppm dissolved oxygen. The temperature displayed via Pt100 temperature sensor (automatic) or manual input is also visible.

American Sensorex dissolved oxygen transmitter - DOMA-10, DOMA-20

The dissolved oxygen probe includes a cathode, an anode, and an oxygen-permeable membrane. Oxygen in the solution passes through the membrane and reacts with the cathode, releasing electrons and generating a corresponding current. Customers can connect the dissolved oxygen sensor to a PLC or other devices requiring 4-20mA input signals.

Supply of American SENSOREX industrial contact conductivity sensors

Supply American sensorex industrial contact conductivity sensor - CS675TC, CS676TC, CS650TC

The high-quality series of industrial conductivity electrodes produced by SENSOREX can be installed either by immersion or in-line. All electrodes are constructed from stainless steel and PEEK materials.

Sensorex USA epoxy body ISE combination electrode

American sensorex epoxy body ISE composite electrode - IS200CD-NH4, IS222CD-NH4

Easy-to-use combination electrode with epoxy body, optional fixed cable or detachable cable

Residual chlorine sensor - CLE3-m, CLE3-DMT, CLE2.2-4

This CLE residual chlorine sensor is a two-electrode amperometric sensor with an outer membrane, used for detecting residual chlorine concentration in water that does not contain surfactants, and can also be used for seawater.

Intelligent measurement and control system - pH & ORP

pH & ORP Intelligent Measurement and Control System Applications: Drinking Water, RO Water, Swimming Pool Water, Cooling Water, Industrial Process Water, Aquariums, Food & Beverage, Papermaking, Electroplating, Chemical, Semiconductor and other industries

Blue-green algae online sensor - BGA-200

BGA-200 is an integrated optical blue-green algae and red algae transmitter, using ultraviolet absorption principle, can be directly installed by immersion, suitable for all occasions requiring blue-green algae measurement, such as marine environment monitoring and other industries.

German knick water quality sensor ORP sensor - SE-564-ORP

ORP sensor SE-564-ORP is a high-load ORP electrode designed for highly polluted media and pressure fluctuation conditions. The reference system uses advanced polymer electrolyte, which can be used in media containing sulfides and has good long-term stability. It is designed for high-pressure applications and pressure fluctuation conditions. In wastewater containing solid impurities, the double-hole junction also prevents blockage of the reference system.

German knick water quality sensor ORP sensor - SE-565-ORP

The SE-565-ORP sensor is a low-maintenance, pressure-resistant sensor. The polymer reference system contacts the process medium through a ceramic junction. The sensor is made of platinum. The SE-565-ORP sensor is designed for simultaneous measurement of ORP and temperature in industrial processes. Suitable for steam sterilization, its reference system was developed for food and pharmaceutical applications.

American Global Water PH electrode water quality sensor - IoLine-HPB

The IoLine high-performance pH electrode uses a patented three-chamber system with an iodine or iodide reservoir reference electrode. The standard hydrogen electrode has been proven difficult to achieve practical significance beyond theoretical importance in real-world applications. The Ag/AgCl reference system, which is the most common reference system, can cause measurement instability due to potential changes with temperature variations or reactions with silver ions in the measurement solution at the diaphragm. In contrast, the IoLine pH electrode has the advantage of lower temperature sensitivity and metal

Global Water Optical Dissolved Oxygen Sensor from the United States

American Global Water optical dissolved oxygen sensor - WQ-FDO

The WQ-FDO optical dissolved oxygen sensor is an instrument designed to measure concentration in liquids. The optical sensor was developed to meet the needs of applications ranging from surface water monitoring programs to wastewater. The WQ-FDO is specifically designed to meet the requirements of environmental monitoring and scientific research fields, providing long-term, accurate, and reliable dissolved oxygen measurement.

German AMT water quality sensor - ORP sensor

ORP sensor summary: Combined with the existing CTD detection system, an integrated shallow water sensor and integrated electronics were developed.

German AMT water quality sensor - H2S

The determination of completely dissolved sulfides (dissolved H2S, HS and S2) is one of the most important parameters in the analysis of natural water and wastewater in industry.

Endetec water quality sensor electrochemical sensing module chlorine - KAPTA™ 2000-AC2

The KAPTA™2000 - ac2 detector has been specially developed to measure active chlorine (HOCl) and temperature directly in high-pressure pipes for many applications, including the management and control of drinking water networks, real-time, rapid control of chemical dosing in industrial water treatment and cleaning regimes, and management of chlorine content in swimming pools and spas.

Endetec water quality monitoring sensor for pH/ORP and temperature measurement.

Endetec water quality monitoring sensor pH/ORP temperature measurement - KAPTA 2000

The KAPT 2000 water quality monitoring sensor is specifically designed for industrial and water treatment markets. Combined with the KAPTA™ 2000 - ac2 chlorine and temperature probe, it provides a fast and accurate measurement of free chlorine.

Sensorex laboratory conductivity sensor from the USA

American sensorex laboratory conductivity sensor - CS150

The laboratory conductivity sensor uses graphite or platinum technology. The epoxy housing is rugged and durable, suitable for portable and laboratory use. Optional electrode constants K = 0.1, K = 1.0, and K = 10.0 (K = 10.0 is only available for CS200 and CS200TC), with optional automatic temperature compensation.

German AMT shallow water micro-sensors for dissolved oxygen

German AMT shallow water micro sensor for dissolved oxygen - Dissolved oxygen

Shallow water micro-sensors for dissolved oxygen have been developed for very rapid in-situ depth profiling via CTD probes, and for horizontal profiling in rivers, lakes, and oceans using towed vehicles, ROVs, or AUVs.

German AMT shallow water dissolved hydrogen micro sensor - Shallow water dissolved hydrogen micro sensor

A current-type microsensor for shallow water has been developed for rapid background depth profiling of dissolved hydrogen in natural waters and oceans using a probe system.

Global Water Conductivity Sensor for Water Quality in the United States

American Global Water water quality conductivity sensor - WQ-Cond

The WQ-Cond conductivity sensor uses 4-electrode measurement technology to provide accurate readings of conductivity and temperature over a wide range. Since the conductivity of ionic solutions increases with temperature, a built-in temperature sensor provides automatic temperature compensation of 2%/°C relative to the standard 25°C. The built-in interface module converts digital conductivity and temperature data into two independent 4-20 mA signals, which connect to data loggers and programmable logic controllers (PLC) devices respectively.

American Sensorex water quality sensor (hydrofluoric acid resistant pH electrode)

US Sensorex water quality sensor (hydrofluoric acid resistant pH electrode) - S350CDHF, S450CDHF

The hydrofluoric acid resistant pH electrode prevents corrosion by HF (up to 2% V/V), suitable for the semiconductor industry, electroplating, etching, and wastewater treatment containing hydrofluoric acid; compatible with all pH meters; special glass membrane resistant to hydrofluoric acid; lifespan is 2, 3, or even 5 times that of similar electrodes.

US Sensorex water quality sensor (spear-tip pH electrode) - S175CD

The S175CD electrode is a spear-tip electrode, an excellent choice for detecting semi-solid substances such as meat, sausage, cheese, and soil. It has an extremely durable glass measuring tip, and the housing is made of high-strength PEI material, making it sturdy and durable.

US Sensorex water quality sensor (laboratory ORP electrode) - SG500C-ORP, SG500CD-ORP

Laboratory ORP electrode (water quality sensor), measurement range: +/-2000mV or ORP range table, temperature/pressure: Max 176°F (80°C) / 50 psig (3.4bar).

Sensorex water quality sensors from the USA (grounded pH electrodes and ORP electrodes)

US Sensorex water quality sensor (grounded pH electrode and ORP electrode) - DA650CD, DA650CD-ORP

The DA series pH and ORP electrodes are designed to solve operational issues when stray voltages and ground loops are present in the solution. Range: 0-14 pH (0-12 pH without Na+ interference); +/- 2000mV ORP.

Sensorex Water Quality Dissolved Oxygen Sensor (Laboratory Dissolved Oxygen Electrode) from the USA

US Sensorex water quality dissolved oxygen sensor (laboratory dissolved oxygen electrode) - DO1200/H, DO1200/T

The DO1200 and DO1200TC employ reliable amperometric technology. No warm-up time is required. The sensors are equipped with a fast-response HDPE membrane cap for portable or laboratory use. A PTFE membrane cap is available for online applications or environments with strong UV radiation. The fill solution can be replaced when needed.

Ozone sensor - OZE 3-mA-2ppm, OZE 2-4P

OZE type ozone sensor is used for the determination of ozone in drinking water, swimming pool water, and process water of similar quality.

Combined pH and ORP (oxidation-reduction potential) sensor - combined pH and ORP sensor

The combined sensor for measuring pH and ORP consists of measuring electrodes (glass electrode for pH, platinum electrode for ORP) and a reference electrode (surrounding the measuring electrodes).

PH ORP sensor - DULCOTEST series

PH ORP sensor transmitter

American Sensorex universal plastic and glass pH and reference electrodes

US Sensorex universal plastic and glass pH and reference electrodes - SG200R / SG200RD series

Universal plastic and glass pH and reference electrodes, pH range: 0-14 (Na+ error >12.3 pH), fast response - 95% in less than 1 second (spherical only).

Sensorex USA sanitary flange conductivity sensor

US Sensorex sanitary flange conductivity sensor - CS615/CS620

This type of sensor is specially designed with 1", 1.5", and 2" three-way clamp flange connections for installation, suitable for food (beverages, dairy, candy, etc.), pharmaceutical, and other applications. These sensors have passed CIP standards and steam sterilization during the manufacturing process.

Sensorex water quality sensors from the United States (submersible or in-line ORP electrodes)

US Sensorex water quality sensor (submersible or in-line ORP electrode) - S500C-ORP, S500CD-ORP

This series of electrodes is primarily designed with an economical design, suitable for a variety of applications such as in-line or submersible installation. Additionally, the housing materials are made of durable epoxy or Ryton materials. It is mainly used in fields such as marine exploration, bioengineering, environmental protection, and winemaking.

American Sensorex Water Quality pH Sensor (3-in-1 pH Electrode)

US Sensorex water quality pH sensor (3-in-1 pH electrode) - S290C series

Water Quality pH Sensor (3-in-1 pH Electrode) S290C, includes pH measuring electrode, reference electrode, and temperature compensation probe (ATC). Its function is the same as three separate electrodes. It is an innovative electrode design that is easy to use and meets the requirements of various instruments.

smart storm water quality sensor - NTU

The measurement principle is based on turbidimetry / 880 nm (ISO 7027). The sensor can be calibrated using formazine standard solutions.